Category: indolines-derivatives

Adding a certain compound to certain chemical reactions, such as: 20780-72-7, name is 4-Bromoisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20780-72-7, HPLC of Formula: C8H4BrNO2

To a solution of 4-bromoisatin 30 (100 mg, 0.44 mmol) in degassed THF/H2O (3:1, 3 mL) was added potassium 4-methyphenyltrifluoroborate (123 mg, 0.62 mmol) and K3PO4 (338 mg, 1.59 mmol) followed by Pd(PPh3)2Cl2 (31 mg, 0.04 mmol). The reaction vessel was sealed and heated by microwave irradiation for 4 h at 130 ¡ãC. The reaction mixture was cooled to rt, diluted with EtOAc (5 mL) and filtered through Celite?. The organic solution was washed with brine (5 mL) and the resulting aqueous layer was further extracted with EtOAc (2*). The combined organic layers were dried (MgSO4), filtered and concentrated in vacuo to give the crude product. The product was purified via flash column chromatography (eluent 30-40 ¡ãC petrol/acetone, 4:1) to afford the title compound (42) as an orange solid (72 mg, 68percent); mp 178-179 ¡ãC; numax (solid) 3274, 3051, 2906, 1741, 1609, 1486; deltaH (400 MHz, CDCl3) 2.43 (3H, s, CH3), 6.88 (1H, d, J = 8.0 Hz, C(7)H), 7.08 (1H, d, J = 8.0 Hz, C(5)H), 7.28 (2H, d, J = 8.5 Hz, C(3′)H and C(5′)H), 7.45 (2H, d, J = 8.5 Hz, C(6′)H and C(2′)H), 7.55 (1H, app t, J = 8.0 Hz, C(6)H), 8.70 (1H, br s, NH); deltaC (125 MHz, CDCl3) 21.4, 110.8, 114.4, 125.9, 128.8, 129.0, 133.1, 138.0, 139.4, 143.8, 154.2, 159.2, 178.3; m/z (ESI-) 236 ([M-H]-, 100percent); HRMS (ESI-) C15H10NO2S- ([M-H]-) requires 236.0717; found 236.0716.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromoisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Gianella-Borradori, Matteo; Christou, Ivy; Bataille, Carole J.R.; Cross, Rebecca L.; Wynne, Graham M.; Greaves, David R.; Russell, Angela J.; Bioorganic and Medicinal Chemistry; vol. 23; 1; (2015); p. 241 – 263;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7477-63-6, name is 7-Chloroisatin, A new synthetic method of this compound is introduced below., Recommanded Product: 7-Chloroisatin

General procedure: To the reaction mixture containing isatin (0.5mmol) in water (2mL), indole (0.5mmol), diethanolamine (20mol percent) was slowly added at room temperature. After thecompletion of reaction as monitored by TLC, the reaction mixture was washed with brine solution and then extracted with ethyl acetate. The organic layer was dried over anhydrous Na2SO4 and the product was purified by flash chromatography on the silica gel column using a gradient of petroleum ether/ethyl acetate, as eluent to afford pure products 1?41.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Sai Prathima, Parvathaneni; Rajesh, Pamanji; Venkateswara Rao, Janapala; Sai Kailash, Uppalapati; Sridhar, Balasubramanian; Mohan Rao, Mandapati; European Journal of Medicinal Chemistry; vol. 84; (2014); p. 155 – 159;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 366453-22-7, name is 4-Methoxyisoindolin-1-one, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 4-Methoxyisoindolin-1-one

Step c: To an ice-cold solution of [11C] (291 mg, 1.78 [MMOL)] in CH2CI2 (20 mL) was added a 1.0 M BBr3 solution in [CH2CI2] (3.6 mL, 3.6 [MMOL).] The cold bath was then removed and the resulting solution was stirred for 16 h at ambient temperature. The reaction was carefully quenched by the addition of water and the mixture was extracted with EtOAc. The combined extracts were washed with water and brine, dried [(MGS04),] filtered and evaporated to dryness to give [11D] (232 mg, 87% yield) as beige solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 366453-22-7.

Reference:
Patent; BOEHRINGER INGELHEIM (CANADA) LTD.; WO2004/26875; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 25369-33-9, These common heterocyclic compound, 25369-33-9, name is 7-Chloroindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Appropriate indolin-2-one or indoline-2-thione (0.3 g) was mixed with acetic anhydride (3 mL) and 4-dimethylaminopyridine (DMAP, 1 mol %). The mixture was heated at 150 C in a round-bottomed flask equipped with an air condenser and CaCl2 guard tube. The reaction time for each reactant is provided in [Table 2] and [Table 3]. After the completion of the reaction excess acetic anhydride was evaporated under reduced pressure. The solid residue obtained in the case of the triacetylated products was suspended in cold methanol and vacuum filtered. The product collected was thoroughly washed with hexane and dried. In the case of mono and diacetylated products the solid residue was purified using flash column chromatography (FCC) (silica gel, hexanes/ethyl acetate).

The synthetic route of 25369-33-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Jha, Mukund; Chou, Ting-Yi; Blunt, Brian; Tetrahedron; vol. 67; 5; (2011); p. 982 – 989;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 19155-24-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 19155-24-9, name is 3,3-Dimethylindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 3,3-dimethylindolin-2-one (31) (12.9 mg, 0.08 mmol), 4-bromo-2-methoxybenzonitrile (30) (17.0 mg, 0.08 mmol), COPPER (I) IODIDE (7.80 mg, 0.04 mmol), TRANS- (1R, 2R)- N, N’- DIMETHYL- CYCLOHEXANE- 1, 2- DIAMINE (11.7 mg, 0.08 mmol) and POTASSIUM PHOSPHATE (35.0 mg, 0.16 mmol) in DMSO (0.50 mL) was heated to 80C for 1.5 h, then heated to 100C for 21h. The reaction mixture was diluted with ethyl acetate, filtered through a plug of silica gel and concentrated by rotary evaporation. The resulting residue was purified by prep-HPLC to afford 4-(3,3-dimethyl-2-oxoindolin-1-yl)-2-methoxybenzonitrile (32) (8.75 mg, 37percent). 1H NMR (500 MHz, DMSO-d6) d ppm 1.41 (s, 6 H) 3.95 (s, 3 H) 6.95 (d, J=7.81 Hz, 1 H) 7.14 (t, J=7.32 Hz, 1 H) 7.20 (d, J=7.81 Hz, 1 H) 7.24 (t, J=7.81 Hz, 1 H) 7.36 (s, 1 H) 7.46 (d, J=6.83 Hz, 1 H) 7.90 (d, J=7.81 Hz, 1 H)

The synthetic route of 3,3-Dimethylindolin-2-one has been constantly updated, and we look forward to future research findings.

Reference:
Article; Guo, Chuangxing; Pairish, Mason; Linton, Angelica; Kephart, Susan; Ornelas, Martha; Nagata, Asako; Burke, Benjamin; Dong, Liming; Engebretsen, Jon; Fanjul, Andrea N.; Bioorganic and Medicinal Chemistry Letters; vol. 22; 7; (2012); p. 2572 – 2578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3484-35-3, name is 5-Methylindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 5-Methylindolin-2-one

General procedure: To a 25 mL round bottomed flask was added different substituted oxindoles 8 (0.2 mmol, 1.0 equiv.) and bromoethylsulfonium salt 9 (132.99 mg, 0.3 mmol, 1.5 equiv.), DMF (2 mL). The mixture was stirred at room temperature for 5min and Et3N (61.88 mg, 0.6 mmol, 3.0 equiv.) was added into reaction system. The mixture was stirred for 6h at room temperature until the reaction completed, quenched with saturated ammonium chloride solution (5 mL), and was extracted with EtOAc (3¡Á30 mL). The combined organic layer washed with H2O (2¡Á10 mL), dried with anhydrous sodium sulfate. After concentration, product was purified using column chromatography on silica gel with suitable eluent.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3484-35-3.

Reference:
Article; Qin, Hui; Miao, Yuanyuan; Zhang, Ke; Xu, Jian; Sun, Haopeng; Liu, Wenyuan; Feng, Feng; Qu, Wei; Tetrahedron; vol. 74; 47; (2018); p. 6809 – 6814;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 1504-06-9,Some common heterocyclic compound, 1504-06-9, name is 3-Methyloxindole, molecular formula is C9H9NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In the Schlenk bottle to point pen 1 b indicated by the 2 – indolone derivatives (29.4 mg, 0.2 mmol), butyl alcohol peroxide (t – BuOOH, 43.2 mg, 0 . 48 mmol), then adding the solvent water (2 ml), then the reactor in air atmosphere, 80 C stirring under the conditions of the reaction, TLC monitoring the reaction by the disappearance of the process until the raw material (the reaction time is 24 hours), after the reaction, the reaction solution is extracted with ethyl acetate three times, the organic phase dried with anhydrous sodium sulfate, filtered and concentrated under reduced pressure to remove the solvent, the residue by column chromatography (elution solvent: ethyl acetate/hexane) to obtain the target product I – 2. (86% Yield);

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-Methyloxindole, its application will become more common.

Reference:
Patent; Ningbo University; Song Sizhe; Wei Wenting; Bao Wenhui; Meng Yanan; Meng Xiaoxiao; (10 pag.)CN109776387; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7477-63-6, name is 7-Chloroisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. category: indolines-derivatives

General procedure: To a well-stirred solution of isatin and malononitrile(1 mmol each) in ethanol (95percent, 4 mL) was added dimedone,4-hydroxycoumarin, 4-hydroxy-N-methylquinolin-2-one,or 2-methyl-pyrazol-2-one [generated in situ from ethylacetoacetate and hydrazine hydrate, 1 mmol each]. To thissolution was added THAM (30 mol percent) and stirring wascontinued at ambient temperature. Upon completion of thereaction (TLC), water (5 mL) was added and stirring wascontinued for 10 min more. Resultant solid product wasfiltered, washed repeatedly with water, and dried. The dried solid was washed thrice with hexaneechloroformmixture (1:1, v/v) and dried again. Resultant product didnot require any further purification.

The synthetic route of 7477-63-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Khot, Supriya S.; Anbhule, Prashant V.; Desai, Uday V.; Wadgaonkar, Prakash P.; Comptes Rendus Chimie; vol. 21; 9; (2018); p. 814 – 821;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 20876-36-2, name is 5-Aminoindolin-2-one, A new synthetic method of this compound is introduced below., category: indolines-derivatives

3-(1H-indol-2-ylmethylene)-5-[(1H-indol-2-ylmethylene)-amino]-1,3-dihydro-indol-2-one A mixture of 5-amino-2-oxindole (74 mg) (prepared as described in Compound IN-009), indole-2-carbaldehyde (87 mg) (prepared according to Synthetic Communications, 1983, 23, 3109) and piperidine (4 mg) in ethanol (2 mL) was heated in a sealed tube at 95¡ã C. for 3 hours. The mixture was cooled to room temperature. The solid was collected by vacuum filtration, washed with cold ethanol and dried in vacuum oven for overnight. The crude solid was then chromatographed on a column of silica gel to give 50 mg (25percent yield) of 3-(1H-indol-2-ylmethylene)-5-[(1H-indol-2-ylmethylene)-amino]-1,3-dihydro-indol-2-one

The synthetic route of 20876-36-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUGEN, Inc.; US2002/183364; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 100510-65-4, These common heterocyclic compound, 100510-65-4, name is 6-Amino-3,3-dimethylindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE H Hexyl N-[2,3-dihydro-3,3-dimethyl-2-oxo-(1H)-indol-6-yl]-carbamate 5.27 g. (0.032 mole) Hexyl chloroformate are added dropwise, while cooling with ice and within the course of 15 minutes, to a suspension of 5.28 g. (0.03 mole) 6-amino-2,3-dihydro-3,3-dimethyl-(1H)-indolin-2-one and 4.6 ml. triethylamine in 50 ml. anhydrous dichloromethane. The solution is then stirred for 3 hours at ambient temperature, the solvent is removed in a vacuum and the residue is purified by flash column chromatography with heptane/butan-2-one (2:1 v/v) as elution agent. Yield 5.2 g. (60% of theory); m.p. 180-183 C. after recrystallisation from ethyl acetate.

Statistics shows that 6-Amino-3,3-dimethylindolin-2-one is playing an increasingly important role. we look forward to future research findings about 100510-65-4.

Reference:
Patent; Boehringer Mannheim GmbH; US4985448; (1991); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem