Category: indolines-derivatives

Adding a certain compound to certain chemical reactions, such as: 7699-18-5, name is 5-Methoxyindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7699-18-5, name: 5-Methoxyindolin-2-one

General procedure: To a solution of the corresponding substituted oxindole (5, 40 mmol) and triethylamine (88 mmol) in THF (140 mL) was added phenyl chloroformate (13.76 g, 11.0 mL, 88 mmol) dropwise. The temperature was kept below 30 C during the addition. After stirring for 30 min at room temperature, the solvent was evaporated. Water (40 mL) was added to the residue and the mixture was stirred for 2 h at 0-5 C. The crystalline product was filtered and recrystallized from ethyl acetate to give compounds 6.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Porcs-Makkay, Marta; Volk, Balazs; Kokai, Eszter; Simig, Gyula; Tetrahedron; vol. 68; 5; (2012); p. 1427 – 1435;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1504-06-9, name is 3-Methyloxindole, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1504-06-9, Recommanded Product: 1504-06-9

General procedure: In an open-air tube at room temperature (25 C), the corresponding 3-substitutedoxindole (0.15 mmol) was added to a solution of organocatalyst 5 (10 mol%) in toluene (1 mL). After 5 minutes, the mixture was introduced into a cooling bath at 0 C, andafter two minutes di-tert-butylazodicarboxilate (0.11 mmol, 1.1 eq.) was added in oneportion. The reaction was then allowed to react for 3 days. After this time, water (5 mL)and ethyl acetate (5 mL) were added, and the aqueous layer was then re-extracted twice (2 x 10 mL). The combined organic phases were dried (MgSO4) and evaporated underreduced pressure. Finally, the reaction crude was purified by column chromatographyon silica gel or TLC preparative using hexane/ethyl acetate mixtures as eluent. Spectroscopic data are listed within the article.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyloxindole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Benavent, Lloren; Baeza, Alejandro; Freckleton, Megan; Molecules; vol. 23; 6; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 118289-55-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Example 3. 5-(2-(4-Benzo[d]isothiazol-3-yl)piperazin-1-yl)ethyl)-6-chloro-1,3-dihydro-2H-indol-2-one hydrochloride. (I); A reactor is loaded with 131 g (0.57 mol) of 6-chloro-5-(2-chloroethyl)-1,3-dihydro-indol-2-one, 125 g (0.57 mol) of piperazinyl benzoisothiazole, 260 ml of dimethylsulfoxide, 26 ml of water and 4.3 g (0.0285 mols) ofNaI. The reaction mixture is added with 103 g (0.969 mol) of Na2CO3, with stirring under nitrogen atmosphere. The resulting mixture is heated to about 115-125C in 1 h and kept at said temperature under stirring for approx. 1 hr 45 min, then cooled and slowly added in about 25 min with isopropyl alcohol (650 ml), at a temperature of about 110C, then slowly cooled at 25C. The filtrate and the precipitate are washed with isopropyl alcohol (2 x 130 ml) to obtain 310 g of 5-(2-(4-benzo[d]isothiazol-3-yl)piperazin-1-yl)ethyl)-6-chloro-1,3-dihydro-2H-indol-2-one free base, as a crystalline solid. The resulting product is placed in a 3 L beaker with 1500 ml of purified water, and 150 ml of 32% HCl are dropped therein with stirring. The reaction mixture is kept under stirring for 10 min, filtered, washed with purified water (2 x 500), dried to give 260 g of 5-(2-(4-benzo[d]isothiazol-3-yl)piperazin-1-yl) ethyl)-6-chloro-1,3-dihydro-2H-indol-2-one hydrochloride, as a crystalline solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Chloro-5-(2-chloroethyl)indolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Dipharma S.p.A.; LUNDBECK PHARMACEUTICALS ITALY S.p.A.; EP1787990; (2007); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, A new synthetic method of this compound is introduced below., name: 2-Oxoindoline-5-carboxylic Acid

General procedure: To a solution of 4 (1.77 g, 10 mmol) in 120 mL ofdichloromethane and 10 mL of DMF was added 4-methylmorpholine or DIEA (10 mL), TBTU (4.81 g, 15mmol) and aniline derivatives (11 mmol). The mixture wasstirred under room temperature for 18 h and washed in turnwith 5% sodium carbonate solution, 5% citric acid solutionand saturated sodium chloride solution. After dried byanhydrous sodium sulfate, the organic layer was evaporatedto dryness. The residue was purified with flash chromatography(CH2Cl2:CH3OH, 50:1) to afford intermediates 5a-5l, which were used in the next step in short time. To asolution of compounds 5a-5l (1.0 mmol) in 10 mL methanolwas added piperidine (30 muL) and 1H-pyrrole-2-carbaldehyde/furan-2-carbaldehyde (1.0 mmol). The mixturewas stirred at 60 C for 5 h and cooled to room temperature.After kept in fridge overnight, the target compounds 6a-6land 7a-7l were obtained in high yields.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Ai, Juntao; Lv, Meng; Li, Xiaohui; Chen, Zhuo; Hu, Gaoyun; Li, Qianbin; Medicinal Chemistry Research; vol. 27; 1; (2018); p. 161 – 170;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 20780-72-7, name is 4-Bromoisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20780-72-7, Computed Properties of C8H4BrNO2

General procedure: Indoles (0.20mmol), isatins (0.10mmol), and 60 wtpercentPWA/MCM-41 catalyst (0.0050 g) were stirred in THF(0.3mL) at room temperature for 2.5 h and monitored byTLC. The product were purified by column chromatographyon silica gel using petroleum ether/ethyl acetate (20 : 1, 10 : 1,5 : 1, 2 : 1, 1 : 1) as the eluent. All compounds (3a?3o) werecharacterized by 1H and 13C NMR (400MHz) spectral analysis.The catalyst was separated from the reaction mixture bycentrifugalization, dried at 473K for 4 h after washing withethanol, then continued to be reused for the next reaction.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Xing, Liuzhuang; Hui, YongHai; Yang, Jinghui; Xing, Xuejian; Hou, Yadong; Wu, Yang; Fan, Kui; Wang, Wei; Journal of Chemistry; vol. 2018; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 897957-06-1, name is 6-Bromo-1-methylindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 897957-06-1, Product Details of 897957-06-1

General procedure: General Procedure: Under nitrogen atmosphere, to a stirred solution of N-substituted-2-oxindole (10 mmol) in dry Et2O (40 mL) was added LiHMDS (1.0 M in THF solution, 12 mmol, 12 mL) dropwise at 0 C. The solution was allowed to warm to ambient temperature and stirred for 1 h. Then the solution was cooled to 0 C and TMSCl (13 mmol, 1.6 mL) was added dropwise. The solution was allowed to warm to ambient temperature and stirred for another 3 h. The solvent was removed under reduced pressure, and dry MeCN (40 mL) was charged to the flask. The solution was cooled to 0 C again and Selectfluor (12 mmol, 4.3 g) was added to the solution in small portions. The resulting suspension was allowed to warm to ambient temperature and stirred overnight. The reaction was quenched by the addition of water (20 mL) and EtOAc (20 mL). The reaction mixture was extracted with EtOAc (20 mL ¡Á 2). The combined organic extracts were dried over anhydrous Na2SO4, filtered, and concentrated under reduced pressure Purification of the crude product was performed by flash column chromatography (Hexane/EtOAc) to afford 3-fluorooxindole.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Zhao, Jian-bo; Ren, Xinfeng; Zheng, Bu-quan; Ji, Jian; Qiu, Zi-bin; Li, Ya; Journal of Fluorine Chemistry; vol. 215; (2018); p. 44 – 51;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 1074-82-4, name is Potassium 1,3-dioxoisoindolin-2-ide, molecular formula is C8H4KNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C8H4KNO2

To a stirred solution of i,6-dibromohexane (12.3 rnL, 81.0 mmol) in DMF (10 mL), was added potassIum phthaiate (5.0 g, 27,0 mrnoi) portion-wise over 30 mm at room temperature. After complete addition, the reaction mixture was stirred at 90 C for 18 h, then quenched with waLer (300 mL) and extracted with diethyl ether (150 mL x 2). The combined organic extracts were washed with water (100 mL x 2), followed by brine (50 mL x 2) and dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure. The resultant residue was purified by silica gel column chromatography (60-120 mesh) using 5-10% EtOAc / hexanes to afford 3-i as an off- white solid (6.3 g, 76% yield). LCMS: 310.95 (M+1).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1074-82-4, its application will become more common.

Reference:
Patent; CV6 THERAPEUTICS (NI) LIMITED; SPYVEE, Mark; SHIRUDE, Pravin S.; (258 pag.)WO2017/6282; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 6326-79-0, name is 6-Bromoisatin, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 6-Bromoisatin

To R4 (500 mg, 2.21 mmol) in acetonitrile (15 mL) is added Met (0.303 mL, 4.87 mmol) and K2CO3 (1.2 g, 8.68 mmol) and the reaction mixture stirred at 60 C. for 45 min. DCM and water is added and the aqueous layer extracted twice with DCM, the combined organic layers are washed with brine, dried and concentrated. Yield 65%. m/z 240/242 [M+H]+, rt 0.49 min, LC-MS Method b.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6326-79-0, its application will become more common.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GRUNDL, Marc; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; RIETHER, Doris; WIENEN, Wolfgang; US2013/172327; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 4403-36-5,Some common heterocyclic compound, 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, molecular formula is C10H8ClNO4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2-(1,3-Dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonic acid (5-chloro-2-{2-[4-(4-fluoro-benzyl)-2-methyl-piperazin-1-yl]-2-oxo-ethoxy}-phenyl)-amide To a solution of of 2-(2-amino-4-chloro-phenoxy)-1-[4-(4-fluoro-benzyl)-2-methyl-piperazin-1-yl]-ethanone (0.050 g, 0.13 mmol) in methylene chloride (1 mL) at ambient temperature was added triethylamine (0.027 mL, 0.19 mmol) and 2-(1,3-dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonyl chloride (0.045 g, 0.17 mmol). The reaction was stirred overnight at ambient temperature. Additional triethylamine ((0.027 mL, 0.19 mmol) and 2-(1,3-dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonyl chloride (0.045 g, 0.17 mmol) was added, The reaction was stirred one hour, then additional triethylamine (0.055 mL, 0.34 mmol) was added. The reaction was stirred and hour, then additional 2-(1,3-dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonyl chloride (0.090 g, 0.34 mmol) was added. After stirring an additional 1 hour, the reaction was treated with saturated aqueous sodium hydrogen carbonate and extracted with methylene chloride (3*). The combined organics were dried over magnesium sulfate, filtered and concentrated in vacuo. Purification via radial chromatography (2 mm plate) gave the title compound (0.030 g).

The synthetic route of 4403-36-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Blumberg, Laura C.; Brown, Matthew F.; Gladue, Ronald P.; McGlynn, Molly A.; Poss, Christopher S.; US2002/107255; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 20870-79-5, The chemical industry reduces the impact on the environment during synthesis 20870-79-5, name is 5-Nitroindolin-2-one, I believe this compound will play a more active role in future production and life.

General procedure: To the 3-subtitutedphenyl-1H-pyrazole-5-carbaldehydes 11(a-d) prepared in the above step was added corresponding substituted oxindoles and catalytic amount of piperdine (1.0ml) in ethanol. Heated the reaction mixture to reflux for 4h at 85C. The solid compounds obtained in the reaction vessel were filtered and washed with ethanol for 4-5 times. After complete air drying the final compounds (Z)-3-((3-phenyl-1H-pyrazol-5-yl)methylene)indolin-2-one analogs 12(a-u) were obtained as pure solids (yield 75-80%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Nitroindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Kamal, Ahmed; Shaik, Anver Basha; Jain, Nishant; Kishor, Chandan; Nagabhushana, Ananthamurthy; Supriya, Bhukya; Bharath Kumar; Chourasiya, Sumit S.; Suresh, Yerramsetty; Mishra, Rakesh K.; Addlagatta, Anthony; European Journal of Medicinal Chemistry; vol. 92; (2015); p. 501 – 513;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem