Indolines-derivatives

Adding a certain compound to certain chemical reactions, such as: 32692-19-6, name is 5-Nitroindoline, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 32692-19-6, Recommanded Product: 32692-19-6

Example 7 1-methylethyl 4-[4-(5-nitro-2,3-dihydro-1H-indol-1-yl)-7H-pyrrolo[2,3-d]pyrimidin-7-yl]piperidine-1-carboxylate; [Show Image] To a mixture of 5-nitro-2,3-dihydro-1H-indole (328 mg, 2.00 mmol), 1-methylethyl 4-(4-chloro-7H-pyrrolo[2,3-d]pyrimidin-7-yl)piperidine-1-carboxylate (323 mg, 1.00 mmol) obtained in Reference Example 3, and N,N-dimethylformamide (10 mL) was added potassium carbonate (830 mg, 6.01 mmol), and the mixture was stirred at 100C for 2 days. The reaction mixture was allowed to cool to room temperature, water was added thereto, and the mixture was extracted with ethyl acetate. The organic layer was washed with saturated brine, dried over anhydrous magnesium sulfate and filtered. The filtrate was concentrated. The residue was crystallized from ethyl acetate to give the title compound as yellow crystals (175 mg, yield 39%). 1H-NMR (300 MHz, CDCl3)delta:1.28 (d, J = 6.0 Hz, 6 H), 1.82 – 1.99 (m, 2 H), 2.02 – 2.16 (m, 2 H), 2.91 – 3.08 (m, 2 H), 3.38 (t, J = 8.7 Hz, 2 H), 4.29 – 4.46 (m, 2 H), 4.65 (t, J = 8.7 Hz, 2 H), 4.87 – 5.02 (m, 2 H), 6.65 (d, J = 3.8 Hz, 1 H), 7.16 (d, J = 3.8 Hz, 1 H), 8.08 (s, 1 H), 8.17 (dd, J = 9.0, 2.3 Hz, 1 H), 8.57 (s, 1 H), 8.62 (d, J = 9.4 Hz, 1 H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Takeda Pharmaceutical Company Limited; EP2399914; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 32692-19-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 32692-19-6 name is 5-Nitroindoline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: We described the synthesis of the compound 1 (Table 2) to illustrate the general procedure for TFA accelerated Petasis three-component reaction. The descriptions of the preparations of all reported compounds are in the Supporting information section. To a magnetically stirred mixture of 5-nitroindoline (0.164 g, 1.0 mmol), 4-tolyboronic acid (0.135 g, 1.0 mmol), and glyoxylic acid monohydrate (0.092 g, 1.0 mmol) in CH2Cl2 (5 ml) was added TFA (20 mul). The mixture was stirred at room temperature for 4 h. After the completion of the reaction (TLC monitoring), half of the solvent was evaporated by means of a rotovap. The resulting solid was filtered through a sintered glass funnel. The collected solid was thoroughly washed with petroleum ether and a small amount of ice water (5 ml), and then dried in vacuo at room temperature for 24 h to afford 0.26 g (83.3 %) of 2-(5-nitroindolin-1-yl)-2-(p-tolyl) acetic acid as a light yellow solid.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Nitroindoline, and friends who are interested can also refer to it.

Reference:
Article; Zhang, Jing; Yun, Fan; Xie, Rui; Cheng, Chunhui; Chen, Guangyao; Li, Jingxuan; Tang, Pingwah; Yuan, Qipeng; Tetrahedron Letters; vol. 57; 35; (2016); p. 3916 – 3919;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 13220-46-7, name is 4-Methylindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13220-46-7, Computed Properties of C9H9NO

4-Methyl-1,3-dihydro-indol-2-one (189 mg), 147 mg of 6-methoxy-2-oxindole, and 1 drop of piperidine in 2 mL of ethanol were heated to 100 C. for 4 hrs. The reaction mixture was cooled and the precipitate was filtered, washed with cold ethanol and dried in a vacuum oven to give 221 mg of 4-methyl-3-(3-methyl-thiophen-2-ylmethylene)-1,3-dihydro-indol-2-one (Compound III) (87%) as a brown solid. 1H-NMR (360 MHz, DMSO-d6) delta 10.53 (s, br, 1H, NH-1), 7.87 (s, 1H, H-vinyl), 7.75 (d, J=5.25 Hz, 1H, H-5′), 7.09-7.11 (m, 2H, H-6, 4′), 6.81 (d, J=7.66 Hz, 1H, H-5), 6.73 (d, J=7.77 (d, J=7.77 Hz, 1H, H-7), 2.60 (s, 3H, CH3-4), and 2.46 (s, 3H, CH3-3′).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Sugen, Inc.; US6846839; (2005); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6941-75-9, name is 5-Bromoisoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 6941-75-9

A mixture of Zn powder (1.73 g, 26.154 mmol), copper (II) sulfate pentahydrate (0.02 g ,0.08 mmol) and 2M aq NaOH (27 mL) were cooled to 0 C. 5-Bromoisoindoline-l,3-dione (5 g, 22mmol) was added at the same temperature over the period of 30 min. The reaction mixture was stirred at 0 C for 30 min and 3 h at RT. The reaction mixture was filtered and the filtrate was neutralized with concentrated HC1. The reaction mixture was diluted with ethanol and extracted with ethyl acetate. The combined ethyl acetate layer was dried over Na2S04 and concentrated under reduced pressure to afford the crude title compound as a brown solid, which was used in the next step without further purification (1.3 g): mp 258-261C; 1H NMR (400 MHz, DMSO-d6) delta 9.03 (br, 1H), 7.81 (m, 2H), 7.69 (m, 1H), 6.44 (m, 1H), 5.88 (d, J = 9.3 Hz, 1H); ESIMS m/z 225.83 ([M-H]”); IR (thin film) 1684, 3246, 606 cm-1.

The synthetic route of 6941-75-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DOW AGROSCIENCES LLC; LO, William, C.; HUNTER, James, E.; WATSON, Gerald, B.; PATNY, Akshay; IYER, Pravin, S.; BORUWA, Joshodeep; WO2014/100206; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 17564-64-6,Some common heterocyclic compound, 17564-64-6, name is 2-(Chloromethyl)isoindoline-1,3-dione, molecular formula is C9H6ClNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[0214] In order to preparation the phthalimidomethyl quarternary salt of Compound 1101, a mixture of 100 mg Compound 1101 and 100 mg sodium iodide (2.0 equivalents) were dissolved in 3.0 ml dry acetonitrile. To the mixture was added 128 mg of chloromethylphthalimide and the vial was heated in an oil bath at 55 C for four days. The product was identified by LCMS as a new peak with RF= 3.984, M+ = 467

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(Chloromethyl)isoindoline-1,3-dione, its application will become more common.

Reference:
Patent; SEMAFORE PHARMACEUTICALS, INC.; GARLICH, Joseph, R.; DURDEN, Donald, L.; WO2004/89925; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 59-48-3, name is Indolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 59-48-3, Computed Properties of C8H7NO

Synthesis of 5-acetyl-1,3-dihydro-indol-2-one is described by Peng Cho Tang (US2003/0069421 A1). This compound was prepared according to this procedure from 6.65 g (50 mmol) of 1,3-dihydro-indol-2-one, aluminium trichloride (150 mmol) and acetyl chloride (100 mmol) to give, after trituration in water and drying, 7.32 g (83%) of 5-acetyl-1,3-dihydro-indol-2-one in the form of a beige solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Indolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Pierre Fabre Medicament; US2009/42876; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 32692-19-6, These common heterocyclic compound, 32692-19-6, name is 5-Nitroindoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

9.30 g (213 mmol) of sodium hydride (purity 55%) and 100 mL of dehydrated DMF were added to a 500 mL two-necked flask, and a solution of 5-nitroindoline in DMF (5-nitroindoline: 35.0 g 213 mmol), DMF: 100 mL) was added dropwise so as not to exceed 30 C. After completion of the dropwise addition, the mixture was stirred at room temperature for 2 hours. To this reaction solution, a DMF solution of 4-fluoronitrobenzene (4-fluoronitrobenzene: 33.0 g (234.5 mmol), DMF: 100 mL) was added dropwise, and the mixture was stirred at room temperature for 6 hours under a nitrogen atmosphere.After completion of the reaction, 100 mL of pure water was slowly poured while stirring the reaction solution, and a solid was precipitated. The precipitated solid was filtered, dissolved again in DMF, poured into 500 mL of pure water, reprecipitated, and the solid was again collected by filtration and recovered . The obtained solid was dispersed and washed with methanol and n-hexane, and vacuum dried to obtain 54.7 g (yield: 90%) of an orange solid.

The synthetic route of 32692-19-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NISSAN CHEMICAL INDUSTRIES LIMITED; NODA, TAKAHIRO; TETSUTANI, HISASHI; (51 pag.)JP5839200; (2016); B2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 60434-13-1, name is 5-Chloro-1-methylindoline-2,3-dione, A new synthetic method of this compound is introduced below., Formula: C9H6ClNO2

General procedure: Step 1: To a 250 mL flask equipped with a silicone oil bubbler was added commercially available isatin (7.7 g, 50 mmol) and anhydrous DMF (80 mL). the mixture was cooled down to 0 oC. To this solution was added NaH (1.32 g, 55 mmol), followed by the addition of CH3I in 15 min. Upon completion of the reaction (monitored by TLC), the mixture was diluted with saturated NH4Cl solution and extracted with ethyl acetate. The organic layer was washed with water, dried over Na2SO4, filtered, and concentrated to yield the crude N-methylindoline-2, 3-dione, which was used directly in the next step. Step 2: The N-methylindoline-2, 3-dione (7.58 g, 47 mmol) was refluxed in NH2·NH2-H2O ( 35 %) for 1h. Then the mixture was cooled to rt. The crude product was extracted with ethyl acetate. The combined organic layer was then dried over Na2SO4, purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 10:1). 1-Methylindolin-2-one was obtained as a pink solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Zhao, Jian-bo; Ren, Xinfeng; Zheng, Bu-quan; Ji, Jian; Qiu, Zi-bin; Li, Ya; Journal of Fluorine Chemistry; vol. 215; (2018); p. 44 – 51;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 17702-83-9, name is 2-(8-Bromooctyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 17702-83-9, Recommanded Product: 2-(8-Bromooctyl)isoindoline-1,3-dione

a) Preparation of 8-(cis/trans-2,6-dimethyl)morpholinyloctyl phthalimide 8-Bromooctylphthalimide (9 g; 26.60 mmoles) and 2,6-dimethyl morpholine (cis-trans isomers mix) (9.8 ml; 79.5 mmoles) were dissolved in anhydrous acetonitrile (50 ml). The mixture was allowed to stir at room temperature for 18 hours approx. The reaction was discontinued by solvent evaporation under reduced pressure. The collected residue was purified by chromatography on silica gel (CH2Cl2/MeOH 95:5). The first product isolated (Rf = 0.7) is a light yellow oil (A trans) (2.04 g), the second (Rf = 0.4) is a yellow oil (B cis) (3.4 g). Total yield 54.8percent.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(8-Bromooctyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MEDIOLANUM FARMACEUTICI S.P.A.; EP575954; (1993); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 5-(Trifluoromethoxy)indoline-2,3-dione

0.4 mmol of 5-trifluoromethoxyisatin, 0.2 mmol of antipyrine, 0.04 mmol of imidazole and 1 mL of water were mixed, and the reaction was stirred under an oil bath of 80 C for 29 hours.Then, the obtained reaction system was cooled to room temperature, extracted with dichloromethane, and the organic phase was collected. The obtained organic phase was dried over anhydrous sodium sulfate, concentrated, and separated by column chromatography (mobile phase: petroleum ether / ethyl acetate volume ratio) In the order of 4/1, 3/1, 2/1 and 1/1), the title compound I-7 (yellow solid, yield 65%, purity 99.8%) was obtained.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 169037-23-4.

Reference:
Patent; Gannan Normal University; Zhang Yong; Nie Longjun; Liu Jinxiang; Fan Xiaolin; (23 pag.)CN110256407; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem