Indolines-derivatives

Reference of 6326-79-0, The chemical industry reduces the impact on the environment during synthesis 6326-79-0, name is 6-Bromoisatin, I believe this compound will play a more active role in future production and life.

General procedure: TiCl4 (0.7 mL, 6 mmol)was added to a stirred suspension of Zn powder (0.78 g, 12 mmol) in freshlydistilled anhydrous THF (15 mL) at room temperature (rt) under a dry N2atmosphere. After completion of the addition, the mixture was refluxed for 2 h.The suspension of the low-valent titanium reagent thus-formed was cooled tort. A solution of isatin or its derivatives 1 or 3 (2 mmol) in THF (10 mL) wasadded dropwise. The mixture was stirred at room temperature for about 5 minunder N2. After this period, the thin layer chromatography (TLC) analysis of themixture showed the reaction completed. The reaction mixture was quenchedwith 3% HCl (15 mL) and extracted with CHCl3 (3 50 mL). The combinedextracts were washed with water (3 50 mL) and dried over anhydrousNa2SO4. After evaporation of the solvent under reduced pressure, the crudeproduct was purified by column chromatography (petroleum ether/ethylacetate = 5:1) to give the pure products 2 or 4.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromoisatin, other downstream synthetic routes, hurry up and to see.

Reference of 32692-19-6,Some common heterocyclic compound, 32692-19-6, name is 5-Nitroindoline, molecular formula is C8H8N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: We described the synthesis of the compound 1 (Table 2) to illustrate the general procedure for TFA accelerated Petasis three-component reaction. The descriptions of the preparations of all reported compounds are in the Supporting information section. To a magnetically stirred mixture of 5-nitroindoline (0.164 g, 1.0 mmol), 4-tolyboronic acid (0.135 g, 1.0 mmol), and glyoxylic acid monohydrate (0.092 g, 1.0 mmol) in CH2Cl2 (5 ml) was added TFA (20 mul). The mixture was stirred at room temperature for 4 h. After the completion of the reaction (TLC monitoring), half of the solvent was evaporated by means of a rotovap. The resulting solid was filtered through a sintered glass funnel. The collected solid was thoroughly washed with petroleum ether and a small amount of ice water (5 ml), and then dried in vacuo at room temperature for 24 h to afford 0.26 g (83.3 %) of 2-(5-nitroindolin-1-yl)-2-(p-tolyl) acetic acid as a light yellow solid.

The synthetic route of 32692-19-6 has been constantly updated, and we look forward to future research findings.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 59-48-3, name is Indolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 59-48-3

AlCl3 (303 g, 2.27 mol) is placed in a 3-necked flask fitted with a thermometer and a dropping funnel. While stirring DMF (50 ml) is added dropwise and the temperature rises to about 60. The mixture is cooled down to 45, and oxindole (33 g, 0.25 mol) is added in 3 portions. After an additional 10 minutes, acetyl chloride (36 ml, 0.5 mol) is added. The mixture is stirred for an additional 30 minutes at room temperature. The mixture is poured onto ice (3000 g). This results in the formation of a solid which is filtered off, washed first with water and then with cold methanol (1000 ml), and then dried to give 5-acetyloxindole.

According to the analysis of related databases, 59-48-3, the application of this compound in the production field has become more and more popular.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 114041-16-6, name is 5,6-Dimethoxyisoindoline, A new synthetic method of this compound is introduced below., COA of Formula: C10H13NO2

General procedure: Compound 8 (70.6 mg, 0.24 mmol) and 5,6-dimethoxyisoindoline(68.5 mg, 0.38 mmol) were dissolved in CH3CN (30 mL), followed by addition of K2CO3 (138.8 mg, 1.00 mmol). The mixture was heated under reflux and stirred at 90 C for 6 h. After cooling and filtration, the solvent was removed under reduced pressure. The residue was purified by silica gel chromatography (petroleum ether/ethyl acetate/triethyamine) = 10:10:1, v/v/v) to afford 13(56.8 mg, 59%)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Related Products of 334952-09-9, The chemical industry reduces the impact on the environment during synthesis 334952-09-9, name is 2-Oxoindoline-6-carboxylic acid, I believe this compound will play a more active role in future production and life.

Example 50 Synthesis of 3-[4-(2-Diethylaminoethylcarbamoyl)-3,5-Dimethyl-1H-Pyrrol-2-Ylmethylene]-2-oxo-2,3-Dihydro-1H-Indole-6-Carboxylic Acid 2-Oxo-2,3-dihydro-1H-indole-6-carboxylic acid (80 mg, 0.45 mmol) was condensed with 5-formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (2-diethylaminoethyl)amide to give 210 mg (92%) of the title compound as a yellow orange solid. 1H-NMR (360 MHz, DMSO-d6) delta 13.6 (s, 1H, NH), 7.76 (d, J=8.0 Hz, 1H), 7.66 (s, 1H, H-vinyl), 7.57 (dd, J=1.5 & 8.0 Hz, 1H), 7.40-7.42 (m, 2H), 3.28 (m, 2H, CH2), 2.88 (m, H-piperidine), 2.54 (m, 6H, 3*CH2), 2.44 (s, 3H, CH3), 2.40 (s, 3H, CH3), 1.56 (m, H-piperidine), 0.97 (t, J=6.98 Hz, 6H, N(CH2CH3)2). MS m/z 424 [M+]

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Oxoindoline-6-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Electric Literature of 15362-40-0, A common heterocyclic compound, 15362-40-0, name is 1-(2,6-Dichlorophenyl)-2-indolinone, molecular formula is C14H9Cl2NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The desired compounds 2(a-d), 3(b-d) and 4(b-d) were procured by subjecting an equivalent mixture of compounds 9 (a-d) (1 mmol) and an active methylene compound- barbituric acid, oxindole and indolinone (1 mmol), respectively in methanol (2 mL) using catalytic amount of piperidine to microwave irradiations at 120 oC for 30 min. The reaction was monitored by TLC after every 10 min. The yellow solid obtained was filtered followed by washing with methanol and dried in air.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7477-63-6, name is 7-Chloroisatin, A new synthetic method of this compound is introduced below., SDS of cas: 7477-63-6

Mg(ClO4)2 (0.1 g) was added to a mixture of isatin (2 mmol), and dimedone (4 mmol) in aqueousethanol solution (50percent, v/v, 5 mL), and the resulting mixture was stirred at 80°C for 10?12 h. Upon completion of the reaction (TLC, Ethyl acetate/Petroleum ether = 1:4), the mixture was allowedto cool to room temperature. The resulting solid was filtered and washed successively with water(2 30 mL) and cold aqueous ethanol (2 1 mL) to afford a crude product, which was recrystallizedfrom EtOH to afford the pure product 3. Some insolubility could be observed in the refluxing ethanolduring the recrystallization process, which should be filtered when hot.

The synthetic route of 7477-63-6 has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 2913-97-5, name is N-(2-Oxoethyl)phthalimide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2913-97-5, HPLC of Formula: C10H7NO3

EXAMPLE 28B Tert-butyl (2S,3S)-2-{[2-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)ethyl]amino}-3-methylpentanoate To a solution of Example 28A (12.1 g) in methanol (20 mL) was added L-isoleucine tert-butyl ester hydrochloride (13.0 g, 58 mmol), sodium cyanoborohydride (7.3 g, 116 mmol), and acetic acid (2 mL). The resulting solution was stirred for 3 hrs at 25° C. and the methanol removed under vacuum, dichloromethane (500 mL) added, and the solution washed with aqueous NaHCO3 (2*300 mL). The organic layer was concentrated to give 12.9 g of the title compound.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, N-(2-Oxoethyl)phthalimide, other downstream synthetic routes, hurry up and to see.

Related Products of 1914-02-9, These common heterocyclic compound, 1914-02-9, name is 3,3-Dimethylindoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 3,3-dimethylindoline (204 mg, 1.386 mmol), ethyl 2-bromobutanoate (1.023 mL, 6.928 mmol), and potassium carbonate (603 mg, 4.363 mmol) in 4 mL CH3CN was stirred at 100C (oil bath) for 23 h. The mixture was extracted with 2 M HCl and CH2C12. Organic phases were concentrated and the residue was purified by preparative HPLC. Fractions containing product were partly concentrated and the residue was extracted with 1 M NaHC03and CH2C12. Organic phases were dried over MgS04, filtered, and concentrate to give ethyl 2-(3,3-dimethylindolin-l-yl)butanoate (254 mg) as an oil. LCMS m/z = 261.8 [M+l]+; NMR (400 MHz, CDC13) delta ppm 1.03 (t, J = 7.4 Hz, 3H), 1.17 (t, J = 7.1 Hz, 3H), 1.25 (s, 3H), 1.34 (s, 3H), 1.79-2.00 (m, 2H), 3.23 (d, J = 8.4 Hz, 1H), 3.41 (d, J = 8.4 Hz, 1H), 4.00-4.13 (m, 3 H), 6.41 (d, J = 7.8 Hz, 1H), 6.63-6.67 (m, 1H), 6.98-7.05 (m, 2H).

The synthetic route of 1914-02-9 has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 52537-00-5, name is 6-Chloro-2,3-dihydro-1H-indole, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 52537-00-5, Safety of 6-Chloro-2,3-dihydro-1H-indole

Sodium cyanoborohydride (4. [88] g, 77.8 mmol) was added to a solution of 6- chloroindoline (5.9 g, [38.] 9 mmol) in acetic acid (100 mL). Gas evolution was evident at the beginning of the reaction. After stirring for 10 h, the solution was diluted with water (100 mL) and 6 N [NAOH] was added until the pH of the reaction mixture was 12-13. The resulting mixture was extracted with [CH2CLZ] (3 x 200 mL), and the combined organic layers dried over [MGS04.] Flash column chromatography on silica gel (35% [ETOAC/HEXANES)] yielded 2.3 g (39%) of a clear liquid : 1H NMR (DMSO-d6) 8 2.87 (t, J= 8.4 Hz, 2H), 3.44 (t, [J =] 8.4 Hz, 2H), 6.45 (d, J= 1.8 Hz, 1H), 6.47 (dd, J = 1.8, 7.6 Hz, 1H), 6.96 (d, J = 7.3 Hz, 1H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.