Indolines-derivatives

Reference of 954-81-4, A common heterocyclic compound, 954-81-4, name is N-(5-Bromopentyl)phthalimide, molecular formula is C13H14BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a suspension of compound 9-12 (20 mmol) and potassium carbonate (50 mmol) in ACN (150 mL) was added dropwise the secondary amine (4 eq.) and the reaction mixture was refluxed for 24 h. After cooling, the reaction mixture was filtered and the filtrate was concentrated to afford an oil that was directly engaged in the next step without further purification. Reactions were performed on a scale of 5 to 20 g of compounds 9-12 to afford amines 14 and 15 with the following yields: 14a, Yield 90%; 14b, Yield 93%; 15a, Yield 89%; 15b, quantitative yield; 15c, Yield 35%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 868066-91-5, name is 5-Bromo-2-methylisoindolin-1-one, A new synthetic method of this compound is introduced below., Safety of 5-Bromo-2-methylisoindolin-1-one

General procedure: 5-Bromo-2-methylisoindolin-1-one (520 mg, 2.30 mmol) and thiophene-2-boronic acid (442mg, 3.45 mmol) were dissolved in a mixure of toluene (12 mL) and EtOH (6 mL). A solutionof 2 M Na2CO3 (3 mL) and Pd(dppf)Cl2 (94 mg, 0.12 mmol) were added and the entiremixture heated at reflux under N2 for 2 h. Additional thiophene-2-boronic acid (294 mg, 2.30mmol) was added and reflux continued under N2 overnight. Upon cooling, the mixture wasdiluted with water (100 mL) and extracted with CH2Cl2 (6×50 mL). The combined organicfractions were dried (Na2SO4), filtered, and the solvent removed under reduced pressure togive a crude solid which was purified by flash column chromatography on silica gel (EtOAcas eluant). The title compound was isolated as a light-brown solid (510 mg, 97percent).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 446292-08-6 as follows. Formula: C22H19N3O6

4- [4-((S)-5-aminomethyl]-2-oxooxazolidin-3-yl)phenyl]morpholine-3-one (VII) 100 gm (wet) (0.2375 moles) 2-({(5S)-2-Oxo-3-[4-{3-oxo-4-morpholmyl)phenyl]- l,3- oxazolidin-5-yl}methyl)- lH-isoindole- l,3(2H)-dione (VI) is added in 500 ml water and (46.02 gm, 1,4845 moles) methyl amine solution (40% Aqueous). Reaction mass is stirred at 35C for 5 hours to get 4-[4-((S)-5-aminomethyl]-2-oxooxazolidin-3-yl) phenyl]morpholine-3-one (VII). Reaction mass is subjected for degassing (i. e. kept under vacuum) for 1 hour to remove excess methyl amine. This aqueous reaction mass is used as such for the preparation of Rivaroxaban without isolation.

According to the analysis of related databases, 446292-08-6, the application of this compound in the production field has become more and more popular.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 667463-64-1, name is 6-Bromo-1-methylindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 6-Bromo-1-methylindoline-2,3-dione

I-3.1 (397 mg, 1.65 mmol) and hydrazine hydrate (1 mL, 20.6 mmol) are heated to 100 C. for 1 h and at 125 C. for 1 h. To the cool reaction mixture DCM and water are added and the aqueous layer extracted twice with DCM. The combined organic layers are washed with brine, dried, concentrated and the residue purified via column chromatography (using solvent mixture cyclohexane/EA=3:1). Yield 65%. m/z 226 [M+H]+, m/z 224 [M+H]-, rt 0.58 min, LC-MS Method b.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 667463-64-1.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7477-63-6, name is 7-Chloroisatin, A new synthetic method of this compound is introduced below., Computed Properties of C8H4ClNO2

Preparation of 7-chloro-3-hydroxy-3-(nitromethyl)indolin-2-one 7-chloroisatin (0.09 g) and nitromethane (0.1 ml) were added to water and the reaction mixture was vigorously stirred at a temperature of 30° C. for 24 hours. The obtained product was extracted with ethyl acetate and the solvent was removed to give pure product.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Synthetic Route of 2058-72-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2058-72-2 as follows.

General procedure: General procedure forthe preparation of oxazolo[5,4-b]quinoline- fused spirooxindoles 4a-t: A reaction of isatin(1 mmol),beta-diketone (1 mmol) and5-amino-3-methylisoxazole (1 mmol) were mixed and irradiated in a closed vesselin the absence of any solvent in a Synthos 3000 microwave reactor at 700 W, 14 bar,and 110 C for 10 min. The reaction was monitored by TLC. Then, thereaction mixture was filtered hot and the resulting solid products were washed with ethanol, dried in air and recrystallized from ethanol.

According to the analysis of related databases, 2058-72-2, the application of this compound in the production field has become more and more popular.

Adding a certain compound to certain chemical reactions, such as: 337536-15-9, name is 4-Bromoisoindolin-1-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 337536-15-9, Recommanded Product: 4-Bromoisoindolin-1-one

A mixture of the 4-bromo-2, 3-dihydro-isoindol-1-one (0.159 g, 0.749 mmol), di tert butyl dicarbonate (0.33 g, 1.5 mmol), triethylamine (0.11 ml, 0.75 [MMOL)] and DMAP (0.092 g, 0.75 [MMOL)] in dichoromethane (7 ml) was stirred at room temperature under nitrogen for 18 hours. The yellow solution was purified by flash chromatography on silica gel eluting with a solvent gradient of heptane/ethyl acetate (3: 1) to give the title compound (0.23 g, 99 %) as a colourless residue. [‘H-NMR] (400 MHz, [CDCI3)] : J = 1.6 (s, 9H), 4.64 (s, 2H), 7.4 (t, [1H),] 7.74 (d, [1H),] 7.84 (d, [1H).] LRMS (Electrospray) : m/z [M+ 2H + Na] [+] 336. Microanalysis : Found: C, 50.45 ; H, 4.72 ; N, 4.38. C13H14NO3Br requires C, 50.02 ; H, 4.52 ; N, 4.49%.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 24566-79-8, name is N-(6-Bromohexyl)phthalimide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 24566-79-8, Safety of N-(6-Bromohexyl)phthalimide

General procedure: Amixture of the corresponding secondary amine 7a-d (5.5 mmol), anhydrous K2CO3 (6 mmol) andcompounds 2-4 (5 mmol) was added inCH3CN (20 ml). The mixture was heated at 65 C for 8-10 h. Thesolvent was evaporated under reduced pressure. Then water (25 mL) was added,and the mixture was extracted with dichloromethane (20 mL × 3). The combinedorganic phases were washed with saturated aqueous NaCl (30 mL), dried oversodium sulfate, and filtered. The solvent was evaporated under a vacuum. The residue was purified on a silicagel chromatography using mixtures of petroleum/acetone as eluent to obtain theoil products 8-10.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Application of 18711-15-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 18711-15-4, name is 4,6-Dichloroisatin, This compound has unique chemical properties. The synthetic route is as follows.

A solution of 4,6-dichloroisatine (7.2 g, 33 mmol) in THF (120 ml) was dropwise added under nitrogen atmosphere to 3,4-dichlorophenylmagnesium bromide (200 ml, 0.5 M in THF). The mixture was stirred 4 h at 70 C, then NH4Claq was added. After extraction in EtOAc, the organic phase was washed three times with NaOH 1 N, then dried over Na2SO4, filtered and concentrated in vacuo. The residue was purified by column chromatography on silica gel (cyclohexane/EtOAc = 8/2) to give 11 (6.73 g, 56%) as a white solid.

The chemical industry reduces the impact on the environment during synthesis 4,6-Dichloroisatin. I believe this compound will play a more active role in future production and life.

Electric Literature of 480-91-1,Some common heterocyclic compound, 480-91-1, name is Isoindolin-1-one, molecular formula is C8H7NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Isoindolin-1-one (200 mg, 1.50mmol) was dissolved in super-dry DMSO (4 mL), and Cs2CO3 (1215 mg, 3.75 mmol), CuI (58 mg, 0.30mmol) and N1,N2-dimethylethane-1,2-diamine (27 mg, 33 muL, 0.30 mmol) were added to the solution.The resulting mixture was stirred at room temperature for 10 min, after which iodobenzene (2.25mmol) was added. Then the mixture was heated to 120 C. When TLC showed that isoindolin-1-onehad been fully converted, the reaction was stopped. The mixture was extracted with ethyl acetate (20mL) and H2O (10 mL). The water phase was re-extracted with ethyl acetate (20 mL). The organic layerwas combined and washed with brine (10 mL). Then the solution was dried over anhydrous MgSO4,filtered and concentrated, and the crude residue was purified by flash chromatography over silica gelusing CH2Cl2/CH3OH as the gradient elution to afford the title compounds.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Isoindolin-1-one, its application will become more common.