Tag: M.W=100-200

These common heterocyclic compound, 61-70-1, name is 1-Methylindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 61-70-1

General procedure: Isatin (0.1 mol, 14.7 g) was dissolved in DMF (60 mL) and finely ground anhydrous K2CO3 (0.15 mol,20.7 g) was added under stirring. RX (0.15 mol) was added dropwise and mixture was heated at 60-70C for 3 h (as alkylation reagent RX were used Me2SO4, EtI, n-PrBr, AmBr, BnCl, PMBCl,respectively). After cooling to room temperature mixture was poured into ice water (200 mL).Precipitated orange solid was filtereted, washed with water and recrystallized from ethanol (95%) togive N-alkylated isatins as red crystalls in 37-92% yield. The purity of obtained compounds weredetermined by melting points, which corresponded to those published in the literature (ref. 2-4).N-Substituted isatin (10 mmol) was mixed with 16 M N2H4·H2O (15 mL). The suspension was heatedat reflux 3 h (caution: rapid gas evolution), then it was cooled to room temperature, diluted with waterS4(40 mL) and extracted with EtOAc (3 x 25 mL). Organic phase was washed with water (25 mL), brine (25 mL), then it was dried over Na2SO4 and evaporated under reduced pressure to give the desired product. The latter was recrystallized from hexane and small amount of EtOAc to give N-substituted indolin-2-one as yellow solid in 47-96% yield. The purity of obtained compounds were determined by melting points and 1H NMR spectra data, which corresponded to those published in the literature (ref. 5,6).N-Substituted indolin-2-one (2 mmol) were dissolved in dry DMF (5 mL) and NaH (60% dispersion in mineral oil, 6 mmol, 240 mg) was portionwise added carefully at a temperature of -15 C. When the rapid evolution of H2 stops, the mixture allowed to stir for 10 min. Then solution of 1,2-dibromoethane (508 mg, 2.7 mmol) in dry DMF (3 mL) was added to the mixture. The latter was warmed to room temperature and stirred overnight. Then it was cooled with ice, diluted with water (20 mL) and extracted with PhMe (2 x 15 mL). Organic phase was washed with water (2 x 15 mL), brine (15 mL) and then it was dried over Na2SO4. Evaporation under reduced pressure gave the desired product. The latter was washed with hexane to remove mineral oil or purified by flash column chromatography (eluent: hexane/CH2Cl2). The spiro[cyclopropane-1,3′-indolin]-2′-ones 1 are yellow solids, except N-amyl substituted spiro[cyclopropane-1,3′-indolin]-2′-one, which is brown liquid. The purity of obtained compounds were determined by 1H NMR spectra data. Corresponding cyclopropanes were previously known in the literature (ref. 7-11).

This is the end of this tutorial post, and I hope it has helped your research about 61-70-1.

Reference:
Article; Buev, Evgeny M.; Moshkin, Vladimir S.; Sosnovskikh, Vyacheslav Y.; Tetrahedron Letters; vol. 59; 37; (2018); p. 3409 – 3412;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 3484-35-3, Chemical engineers ensure the efficiency and safety of chemical processes, adapt the chemical make-up of products to meet environmental or economic needs, and apply new technologies to improve existing processes.

General procedure: To a solution of 3-substituted-5-benzylidene-2-thioxo-4-thiazolidinone (1-19) (0.003 mol) in 1,4-dioxane (15 mL) was added HC(OEt)3(2 mL) and BF3Et2O (2 mL). The reaction mixture washeated to 80 C and stirring was continued at the same temperature for 4 h. Theresulting 2-ethylthio-3-substituted-5-benzylidene- 4-thiazolium fluoroborate (Ic, IIc) was precipitated, filteredoff, and dried without any additional purification, as starting material forthe following reactions. To a mixture of thiazolium fluoroborate (Ic, IIc) (0.003 mol) and correspondingindolin-2-one (0.003 mol) in acetonitrile (15 mL) was added triethylamine (0.91g, 0.009 mol) dropwise at 25 C, and the mixture was stirred for 4 h at thesame temperature. The orange precipitate was collected and washed with ethylacetate (8 mL). The crude product thus obtained was recrystallized frommethanol or acetone to give compound (1-19).

Because a catalyst decreases the height of the energy barrier, its presence increases the reaction rates of both the forward and the reverse reactions by the same amount.Read on for other articles about 3484-35-3.

Reference:
Article; Wang, Feng; Liu, Zijian; Wang, Jian; Tao, Jun; Gong, Ping; Bao, Xue; Zhao, Yanfang; Wang, Yulin; European Journal of Medicinal Chemistry; vol. 101; (2015); p. 126 – 132;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

61-70-1, Having gained chemical understanding at molecular level, chemistry graduates may choose to apply this knowledge in almost unlimited ways, as it can be used to analyze all matter and therefore our entire environment.

General procedure: An oven-dried reflux tube equipped with a magnetic stir bar and a Teflon stopcock was charged with aryl halide (1 mmol), oxindole (1 mmol),potassium carbonate (1.1 mmol), catalyst nanoparticles (0.05 mmol)and 1,4-dioxane (2 ml) and heated at 70 C. The mixture was vigorously stirred under these reaction conditions and completion of the reaction was monitored by TLC (EtOAc: n-hexane, 25:75). After completion of the reaction, the reaction mixture was cooled to room temperature, the magnetic nanoparticles of the catalyst were collected using a magnet. Ethyl acetate (5 mL) and water (10 mL)were added to the mixture in the next step. The aqueous layer was furtherextracted by ethyl acetate (2*5 mL). The combined organic layerswere washed with saturated brine, dried over CaCl2, filtered, and concentrated to give a residue which was purified by recrystallization from ethanol and water or by column chromatography on silica gelusing EtOAc: n-hexane, 1:7.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 61-70-1.

Reference:
Article; Moghaddam, Firouz Matloubi; Tavakoli, Ghazal; Latifi, Fatemeh; Saeednia, Borna; Catalysis Communications; vol. 75; (2016); p. 37 – 41;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Formula: C8H7NO, Modeling chemical reactions helps engineers virtually understand the chemistry, optimal size and design of the system, and how it interacts with other physics that may come into play.

Sodium hydride (9.0 g; 0.2 mol, 60% in mineral oil) was added portion-wise to a solution of oxindole (10.0 g, 75 mmol) in of dry DMF (350 mL). After 15 minutes, the reaction was cooled to 0 C. and 1,4 dibromoethane in 100 mL of dry DMF was added over 15 minutes. The dark brown reaction was allowed to warm to room temperature and stirred overnight. The reaction was diluted with ethyl acetate and water was added. The layers were separated and the organic layer was dried over anhydrous sodium sulfate. The organic layer was filtered, concentrated in vacuo to give 20 g of red oil. The crude product was purified on silica using a stepwise gradient of 10% to 20% ethyl acetate: hexane to afford Spiro[cyclopropane-1,3′-[3H]indol]-2′(1’H)-one (2.3 g, 11%).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 59-48-3 is helpful to your research.

Reference:
Patent; Wyeth; US2006/30615; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

2058-74-4, Researchers are common within chemical engineering and are often tasked with creating and developing new chemical techniques, frequently combining other advanced and emerging scientific areas.

General procedure: A mixture of isatin derivative (1.0mmol), activated methylene (1.0mmol), 1,3-diketones (1.0mmol), and Fe3O4SiO2-imid-PMAn catalyst (0.8mol%) was stirred at 70C in water or irradiated in a microwave oven at 200W for an appropriate period of time as indicated in Table 2. After completion of the reaction, as indicated by TLC, the reaction mixture was diluted with hot ethanol (10mL). The catalyst was removed by using a magnetic field and then the solvent was evaporated and the pure product was obtained by recrystallization from ethanol.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 1-Methylisatin.

Reference:
Article; Esmaeilpour, Mohsen; Javidi, Jaber; Divar, Masoumeh; Journal of Magnetism and Magnetic Materials; vol. 423; (2017); p. 232 – 240;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Product Details of 39603-24-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 39603-24-2 as follows.

isatin(1.0 mmol) was added to a 50 mL dry round bottom flask in turn.O-iodophenylacetonitrile (1.0 mmol), 4-hydroxycoumarin (1.0 mmol),Catalyst 3e (5 mol%), palladium dichloride (5 mol%),KOH (20 mol%), DMSO 3 mL, mix well, stir at 110 C,After the reaction was completed (TLC tracking), an appropriate amount of water was added and extracted with ethyl acetate.The organic phases are combined, and the excess solvent in the system is distilled off under reduced pressure.The crude product was separated by column chromatography (V petroleum ether: V ethyl acetate = 1:1 gradient elution) to give the title compound 12b in a yield of 85%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 39603-24-2, its application will become more common.

Reference:
Patent; Jiangsu Normal University; Chen Wen; Yuan Rui; Cui Hao; Ren Xuanxuan; Zhou Shengliang; Wan Yu; Wu Hui; (19 pag.)CN109305970; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 32692-19-6, name is 5-Nitroindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Synthetic Route of 32692-19-6

(1) Preparation of 1-(2-chloroacetyl)-5-nitroindoline5-nitroindoline (16.4g, 100mmol) was dissolved in ethyl acetate (200ml), and then chloroacetyl chloride (9.6ml 120mmol) was slowly added at 40 C. The resulting mixture was heated to 80 C, and reacted for 0.5 hour. The reaction mixture was cooled and filtered by suction. The filtrate was crystallized to produce 1-(2-chloroacetyl)-5-nitroindoline (22g) as a grey solid in a yield of 92%.

I am very proud of our efforts over the past few months and hope to 32692-19-6 help many people in the next few years.

Reference:
Patent; KBP Biosciences Co., Ltd.; LO, Hoyin; WANG, Aichen; ZHANG, Qian; EP2930167; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., SDS of cas: 7477-63-6

General procedure: In a 25 mL round bottom flask, isatins 1 (1 mmol), 3-phenylisoxazol-5(4H)-one 2 (1 mmol) or 3-ethylisoxazol-5(4H)-one 7 (1 mmol), pyrazol-5-amine 3 (1 mmol) or 6-aminopyrimidine-2,4-(1H,3H)-dione 5 (1 mmol), and Amberlyst-15 (100 mg) were stirred in CH3OH (5.0 mL) at 80 C. When the reaction was completed (detected by TLC), the spherical catalyst was separated by a sieve at once under hot condition. Then, the reaction mixture was cooled to room temperature, and solid precipitation occurred. After filtration, the crude product was recrystallized from EtOH and DMF to give pure compound.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 7477-63-6.

Reference:
Article; Niu, Qingqing; Xi, Junhua; Li, Lei; Li, Li; Pan, Chengli; Lan, Meijun; Rong, Liangce; Tetrahedron Letters; vol. 60; 43; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Electric Literature of 102359-00-2

General procedure: A solution of 9a-d (2 mmol), EDCI (3 mmol) and HOBt (3 mmol) in dry DCM (20 mL) was stirred at 0C for 3.5 h. Then different substituted amines (2.2 mmol) and DIPEA (4 mmol) were added and the reaction was stirred at r.t. for another 1.5 h. The organic layer was washed with water and brine and dried over Na2SO4. Removal of the solvent gave a residue that was purified by column chromatography (silica gel, CH2Cl2-MeOH 100: 1 as an eluent) to furnish 10a-n as white solids.

Interested yet? This just the tip of the iceberg, You can reading other blog about 102359-00-2.

Reference:
Article; Guo, Jing; Zhu, Mingyue; Wu, Tianxiao; Hao, Chenzhou; Wang, Kai; Yan, Zizheng; Huang, Wanxu; Wang, Jian; Zhao, Dongmei; Cheng, Maosheng; Bioorganic and Medicinal Chemistry; vol. 25; 13; (2017); p. 3500 – 3511;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

32372-82-0,When developing chemical systems it’s of course important to gain a deep understanding of the chemical reaction process.

1-Ethyl-3-(3- dimethylaminopropyl)carbodiimide (2 eq.) was added to a stirred solution of 7 (1 eq.), isoindoline hydrochloride (1.5 eq.), 1-hydroxybenzotriazole (2 eq.) N,N- diisopropylethylamine (2 eq.) in dichloromethane (150 mL) at 0 C. The resulting solution was stirred at room temperature for 14 h before quenching with saturated sodium bicarbonate solution (120 mL). The organic layer was washed with 1 M hydrochloric acid solution (120 mL) and saturated sodium chloride solution (120 mL), dried over sodium sulfate, filtered, and concentrated. The residue was purified by flash chromatography (Si02, 1 :4 hexanes/ethyl acetate) to afford 8 (82%) as a white amorphous solid. 1H- NMR (400 MHz, CDC13) delta 7.97 (m, 1H), 7.43 (m, 2H), 7.37 (m, 2H), 6.07 (s, 2H), 6.00 (s, 2H), 4.52 (s, 2H), 4.41 (s, 2H), 3.35 (s, 3H), 3.27 (s, 3H), 3.05 (m, 1H), 1.14 (d, J=7.52, 6H).13C- NMR (100 MHz, CDC13) delta 169.5,157.5, 156.6, 140.0 (2), 130.6, 128.5 (2), 126.2 (2), 126.0, 111.2, 99.9, 95.2, 94.5, 56.1, 55.6 (2), 26.9, 23.6 (2).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; UNIVERSITY OF KANSAS; BLAGG, Brian S. J.; KENT, Caitlin Nicole; MISHRA, Sanket Jaiprakash; (93 pag.)WO2018/132769; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem