Tag: M.W=100-200

These common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 102359-00-2

Ethyl chloroformate and TEA were added to a THF solution of 2-oxoindoline-5-carboxylic acid and stirred. The reaction solution was mixed with N,N-diethylethylenediamine, stirred and then purified to obtain N-[(2-diethylamino)ethyl]-2-oxoindoline-5-carboxamide as a brown solid. F+: 276.

The synthetic route of 2-Oxoindoline-5-carboxylic Acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; YAMANOUCHI PHARMACEUTICAL CO. LTD.; EP1396490; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 324-03-8, name is 6-Fluoroindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 324-03-8, Safety of 6-Fluoroindoline-2,3-dione

To a mixture of 5.0 g (30.3 mmol) 6-fluoro-1H-indole-2,3-dione in 75 mL of 33% aq. potassium hydroxide solution was added 4.67 g (53.0 mmol) pyruvic acid and this mixture was heated at 40C for 18 hours. After cooling to room temperature 10% aq. sulfuric acid was added (pH about 1). The formed solid was isolated by filtration and dried in vacuum. The solid was the desired 7-fluoroquinoline-2,4-dicarboxylic acid,which was used without further purification. Yield: 6.02 g (85%).1H-NMR (300 MHz, DMSO d6) 6 (ppm) = 7.78 (ddd, 1H), 7.99 (dd, 1H), 8.42 (s, 1H),8.89 (dd, 1H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; HEISLER, Iring; BUCHMANN, Bernd; CLEVE, Arwed; HEROULT, Melanie; NEUHAUS, Roland; PETRUL, Heike; QUANZ-SCHOeFFEL, Maria; KOPITZ, Charlotte Christine; (285 pag.)WO2016/202935; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 59-48-3, A common heterocyclic compound, 59-48-3, name is Indolin-2-one, molecular formula is C8H7NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE I 5-acetyl-2-indolinone 171 g (1.28 mol) aluminium chloride in 500 ml 1,2-dichloroethane are cooled in the ice bath. Then 78 g (1.1 mol) acetylchloride are added dropwise, so that the temperature does not exceed 10 C. After 1 h, 71.3 g (0.53 mol) 2-indolinone (1,3-dihydro-indol-2-one) are added in 4 batches and the temperature is kept at 10-12 C. The reaction mixture is left overnight to warm up slowly to ambient temperature. Then the solution is slowly added to 1 kg ice with vigorous stirring. The slurry is diluted with 1 l water and stirred for another 30 min. Then the precipitate is suction filtered. Yield: 80.9 g (86.3% of theory) Rf=0.36 (silica gel, ethyl acetate/cyclohexane/methanol 9:9:2) C10HgNO2 (MG=175.19) Mass spectrum: m/z=174 (M-H)-

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Boehringer Ingelheim International GmbH; US2005/234120; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 39603-24-2,Some common heterocyclic compound, 39603-24-2, name is 5,7-Dimethylindoline-2,3-dione, molecular formula is C10H9NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

j0309j A. 6,8-Dimethyl-2-(3-methyl-1-benzofuran-2-yl)quinoline-4-carboxylic acid. To a100 ml. round-bottom flask was placed a solution of 1-(3-methyl-1-benzofuran-2-yl)ethan-1-one (1 g,5.74 mmol) in EtOH (20 mL) then 5,7-dimethyl-2,3-d1H ydro-1H -indole-2,3-dione(800 mg,4.57 mmol) and KOH (800 mg) were added. The resulting solution was heated to80C and stirred for 16 h. The reaction was cooled to rt and concentrated under reducedpressure. The residue was dissolved in 100 mL of H20,washed with MTBE (3×50 mL),and the pH of the solution was adjusted to 2-3 with 2N HC1. The resulting precipitate was isolated by filtration and washed with MeOH (3×50 mL) affording 485 mg (32%) of the title compound as a yellow solid. Mass Spectrum (LCMS,ESI pos): Calcd. for C2,H,8NO3: 332.1 (M+H); Found: 332.0. 1H NMR (300 MHz,DMSO-d6): oe 13.95 (s,1H ),8.43 (s,1H ),8.33 (s,1H ),7.80-7.77 (d,J= 7.5 Hz,1H ),7.73-7.70 (d,J= 8.1H z,1H ),7.61 (s,1H ),7.47-7.42 (t,J= 7.5 Hz,1H ),7.38-7.33 (t,J= 7.5 Hz,1H ),2.85 (s,3H),2.73 (s,3H),2.52 (s,3H). HPLC purity(254 nm): 99.5%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5,7-Dimethylindoline-2,3-dione, its application will become more common.

Reference:
Patent; PROTEOSTASIS THERAPEUTICS, INC.; MUNOZ, Benito; BASTOS, Cecilia, M.; PARKS, Daniel; KOMBO, David; (301 pag.)WO2017/62581; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 17564-64-6, These common heterocyclic compound, 17564-64-6, name is 2-(Chloromethyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The initial carbonyl compound (50 mmol) was dissolved/suspended in ethanol (50 mL) and magnetically stirred with thiosemicarbazide (50 mmol) and catalytic amounts of acetic acid for 8-24 h at room temperature. The obtained thiosemicarbazone was filtered, washed with appropriate solvent (n-hexane, petroleumether or diethyl ether) and dried under vacuum. The intermediate thiosemicarbazone (50 mmol) reacted with ethyl bromoacetate (50 mmol), in methanol (50 mL) and sodium acetate (50 mmol) at room temperature under magnetic stirring for 24 h. The resulting 4-thiazolidinone was poured on ice, filtered or extracted with chloroform (3 x 100 mL) and purified by column chromatography (SiO2, ethyl acetate/n-hexane). Then, the obtained thiazolidinone (50 mmol) was dissolved/suspended in 50 mL of anhydrous acetone in the presence of anhydrous potassium carbonate (50 mmol), and reacted with equimolar amounts of 4-nitrobenzyl bromide, 1-(chloromethyl)naphthalene and N-(chloromethyl)phthalimide for 24-48 h. The product was poured on ice, filtered or extracted with chloroform (3 x 50 mL) and purified by column chromatography (SiO2, ethyl acetate/n-hexane) in order to obtain the title compoundsin high yields. 7.1.53 2-((2-(2-(Propan-2-ylidene)hydrazono)-4-oxothiazolidin-3-yl)methyl)isoindoline-1,3-dione (1C) Yellow powder, mp 119-124 C, 99% yield; 1H NMR (400 MHz, DMSO-d6): delta 1.79 (s, 3H, CH3), 1.88 (s, 3H, CH3), 3.95 (s, 2H, CH2, thiazolidinone), 5.52 (s, 2H, ArCH2), 7.73-8.31 (m, 4H, Ar).

Statistics shows that 2-(Chloromethyl)isoindoline-1,3-dione is playing an increasingly important role. we look forward to future research findings about 17564-64-6.

Reference:
Article; De Monte, Celeste; Carradori, Simone; Bizzarri, Bruna; Bolasco, Adriana; Caprara, Federica; Mollica, Adriano; Rivanera, Daniela; Mari, Emanuela; Zicari, Alessandra; Akdemir, Atilla; Secci, Daniela; European Journal of Medicinal Chemistry; vol. 107; (2016); p. 82 – 96;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 59-48-3, name is Indolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Formula: C8H7NO

5-Acetyl-2-oxindole 2-Oxindole (3 g) was suspended in 1,2-dichloroethane and 3.2 mL acetyl chloride were slowly added. The resulting suspension was heated to 50 C. for 5 hours, cooled, and poured into water. The resulting precipitate was collected by vacuum filtration, washed copiously with water and dried under vacuum to give 2.9 g (73% yield) of the title compound as a brown solid.

The synthetic route of 59-48-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUGEN, Inc.; US2003/69421; (2003); A1;; ; Patent; Sugen, Inc.; US6051593; (2000); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 1074-82-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1074-82-4, name is Potassium 1,3-dioxoisoindolin-2-ide, This compound has unique chemical properties. The synthetic route is as follows.

(Synthesis of Intermediate 1)96.2 g (1.04 mol) of chloroacetone was added to 300 ml of N-methylpyrrolidone (NMP), and the mixture was stirred at 15 to 20 C. 175 g (0.945 mol) of phthalimide potassium was added in portions to the solution, while the temperature of reaction solution was kept at 30 C. or lower. After addition, the mixture was stirred at room temperature for two hours, to complete the reaction. After reaction, the reaction solution was poured into 3,000 ml of water, allowing precipitation of the crystal. The crystal was filtered, washed with water and dried, to give 163 g of an intermediate 1 (yield: 84.9%).

The chemical industry reduces the impact on the environment during synthesis Potassium 1,3-dioxoisoindolin-2-ide. I believe this compound will play a more active role in future production and life.

Reference:
Patent; FUJIFILM CORPORATION; US2012/238752; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20870-79-5, name is 5-Nitroindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 20870-79-5

To a suspension of 5-nitroindolin-2-one (5 g, 1 eq.) in EtOH(50 mL), activated carbon (1 g) and FeCl3 (1 g) were added.The mixture was heated to 78 C, and stirred for 10 min.Then 80% aqueous solution of hydrazine hydrate (8 eq.)was added dropwise into the reaction mixture in 5 min, theresulting mixture was stirred at 78 C for 8-10 h, thencooled to room temperature. The mixture was filtered to remove residue of activated carbon; the filtrate was concentratedunder vacuum to afford crude product, which waspurified by recrystallization from EtOH (about 15 mL) togive 5-aminoindolin-2-one as a pale yellow solid (yield91.9%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 20870-79-5.

Reference:
Article; Zhou, Yuanzheng; Ju, Yuan; Yang, Yang; Sang, Zitai; Wang, Zhenling; He, Gu; Yang, Tao; Luo, Youfu; Journal of Antibiotics; vol. 71; 10; (2018); p. 887 – 897;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 100510-65-4, name is 6-Amino-3,3-dimethylindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Safety of 6-Amino-3,3-dimethylindolin-2-one

B. 6-(6-(3-chloropyridin-2-yl)-5,6,7,8-tetrahydropyrido[4,3-d]pyrimidin-4-ylamino)-3,3-dimethylindolin-2-one A mixture of 6-amino-3,3-dimethylindolin-2-one (156 mg), 4-chloro-6-(3-chloropyridin-2-yl)-5,6,7,8-tetrahydropyrido[4,3-d]pyrimidine (100 mg), and CH3CN (5 mL) was run in a Microwave Reactor at 180 C. for 1 h. After cooling, the mixture was treated with sat. aq. Na2CO3 and extracted with EtOAc (30 mL*3). The combined organic layers were washed with brine, dried (Na2SO4) and concentrated. The residue was purified by column to give an off-white solid (120 mg, 80%). 1H NMR (d6-DMSO): 10.32 (s, 1H), 8.54 (s, 1H), 8.40 (s, 1H), 8.28 (dd, 1H, J=5.2, 1.6 Hz), 7.89 (dd, 1H, J=8.0, 1.6 Hz), 7.30 (s, 1H), 7.19 (s, 2H), 7.08 (dd, 1H, J=8.0, 4.8 Hz), 4.38 (s, 2H), 3.61 (t, 2H, J=6.0 Hz), 2.88 (t, 2H, J=5.6 Hz), 1.24 (s, 6H).

The synthetic route of 100510-65-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Kelly, Michael G.; Kincaid, John; Kaub, Carl J.; US2006/258689; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1914-02-9, name is 3,3-Dimethylindoline, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1914-02-9, Application In Synthesis of 3,3-Dimethylindoline

3,3-DimethyM -(1 -methyl-4-piperidinyl)-2,3-dihydro-1 H-indole (D5) To a solution of 3,3-dimethyl-2,3-dihydro-1 /-/-indole (500 mg, 3.4 mmol) in acetic acid (5 ml) under an argon atmosphere was added 1-methyl-4-piperidinone (423 mg, 3.74 mmol) and after 5 minutes NaBH(OAc)3 (1.08 g, 5.1 mmol) was added in one portion. After 0.5 hours the mixture was diluted with water, basified with NaOH (pellets) until pH ca. 10 and extracted with Et2O. The organic phase was separated and dried over MgSO4. The solution was filtered and concentrated to afford 3,3-dimethyl-1-(1-methyl-4-piperidinyl)- 2,3-dihydro-1 H-indole (D5) in 94% yield (780 mg).1H-NMR (CDCI3): delta 1.27 (6H, s), 1.74 (4H, m), 2.04 (2H, dt), 2.30 (3H, s), 2.95 (2H1 d), 3.13 (2H, s), 3.35 (1 H, m), 6.40 (1 H, d, J=7.6 Hz), 6.63 (1 H, t, J=7.6 Hz), 6.98 (1 H, d, J=7.6 Hz), 7.04 (1H, t, J=7.6 Hz). MS: m/z (M+H)+ 245, C16H24N2 requires 244

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; GLAXO GROUP LIMITED; WO2006/38006; (2006); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem