Tag: M.W=100-200

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7477-63-6, name is 7-Chloroisatin, This compound has unique chemical properties. The synthetic route is as follows., Safety of 7-Chloroisatin

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 °C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

According to the analysis of related databases, 7477-63-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 17630-75-0, name is 5-Chloro-2-oxindole, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 17630-75-0, Recommanded Product: 17630-75-0

7-Bromo-5-Chloro-2-Oxindole 5-Chloro-2-oxindole (16.8 g) and 19.6 g of N-bromosuccinimide were suspended in 140 mL of acetonitrile and refluxed for 3 hours. Thin layer chromatography (silica, ethyl acetate) at 2 hours of reflux showed 5-chloro-2-oxindole or N-bromosuccinimide (Rf 0.8), product (Rf 0.85) and a second product (Rf 0.9) whose proportions did not change after another hour of reflux. The mixture was cooled to 10 C., the precipitate was collected by vacuum filtration, washed with 25 mL of ethanol and sucked dry for 20 minutes in the funnel to give 14.1 g of wet product (56% yield). The solid was suspended in 200 mL of denatured ethanol and slurry-washed by stirring and refluxing for 10 minutes. The mixture was cooled in an ice bath to 10 C. The solid product was collected by vacuum filtration, washed with 25 mL of ethanol and dried under vacuum at 40 C. to give 12.7 g (51% yield) of 7-bromo-5-chloro-2-oxindole.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Chloro-2-oxindole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Sugen. Inc.; US2003/100555; (2003); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 912999-79-2, name is 5-Chloroisoindoline hydrochloride, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 912999-79-2

A mixture of Compound 151A (340 mg, 2.36 mmol) and 1-(azidomethyl)-4- methoxybenzene (500 mg, 3.07 mmol) in toluene (15 mL) was stirred at 110 C for 48 hours. The reaction mixture was concentrated and purified by column chromatography on silica gel using ethyl acetate- hexane as eluent to afford a Mixture 151B. LC-MS (ESI) m/z: 278 [M+H]._A Mixture 151B (60 mg, 0.217 mmol) and thionyl chloride (0.45 mL) in methylene chloride (10 mL) was stirred at 50 C for 5 hours. The reaction mixture was concentrated to give isic, which was used directly in the next step without further purification.LC-MS (ESI) m/z: 296 [M+H]._ A Mixture 151C (74 mg, 0.2 17 mmol), 5-chloroisoindoline (38 mg, 0.248 mmol), and K2C03 (60 mg, 0.43 5 mmol) in DMF (6 mL) was stirred at 60 C for 5 hours. The mixture was poured into water (100 mL) and extracted with ethyl acetate (100 mL x 3). The combined extracts were washed with brine (200 mL), dried over anhydrous sodium sulfate, filtered, and concentrated. The residue was purified with preparative HPLC to afford a Mixture 151D. LCMS (ESI) m/z: 413 [M+H]t

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 912999-79-2.

Reference:
Patent; BIOMARIN PHARMACEUTICAL INC.; WANG, Bing; CHAO, Qi; (737 pag.)WO2019/133770; (2019); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 20870-79-5, A common heterocyclic compound, 20870-79-5, name is 5-Nitroindolin-2-one, molecular formula is C8H6N2O3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(c) Preparation of 5-Amino-2-oxindole. The 5-nitro-2-oxindole (6.3 g) was hydrogenated in methanol over 10% palladium on carbon to give 3.0 g (60% yield) of the title compound as a white solid.

The synthetic route of 20870-79-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sugen, Inc.; US6147106; (2000); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 64483-69-8, name is 5-Acetylindolin-2-one, A new synthetic method of this compound is introduced below., Safety of 5-Acetylindolin-2-one

5-Acetyl-3-(1H-indol-2-ylmethylene)-1,3-dihydro-indol-2-one Indole-2-carbaldehyde was prepared as described in the literature: Michel Barbier, Michel Devys, Christiane Tempete, Albert Kollmann and Jean-Francois Bousquet, Synthetic Communications, 23(22), 3109-3117 (1993). A mixture of 5-acetyl-2-oxindole (88 mg) (prepared as described in Compound IN-06), indole-2-carbaldehyde (87 mg) and piperidine (4 mg) in ethanol (2 mL) was heated in a sealed tube at 90 C. for 3 hours. The mixture was cooled to room temperature. The solid was collected by vacuum filtration, washed with cold ethanol and dried in oven for overnight to give 133 mg (88% yield) of 5-acetyl-3-(1H-indol-2-ylmethylene)-1,3-dihydro-indol-2-one as an orange solid. 1H NMR (360 MHz, DMSO-d6) 12.81 (s, br, 1H, NH), 11.38 (s, br, 1H, NH), 8.38 (d, J=1 Hz, H-4), 8.17 (s, 1H, vinyl), 7.88 (dd, J=1 and 8 Hz, 1H, H-6), 7.69 (d, J=8 Hz, 1H), 7.58 (d, J=8 Hz, 1H), 7.29 (t, 1H), 7.21 (s, 1H), 7.09 (t, 1H), 7.0 (d, J=8 Hz, 1H), 2.59 (s, 3H, CH3). MS m/z 303.1 [M+1]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SUGEN, Inc.; US2002/183364; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 59-48-3, name is Indolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C8H7NO

5-Bromo-2-oxindole 2-Oxindole (1.3 g) in 20 ML acetonitrile was cooled to -10 C. and 2.0 g N-bromosuccinimide was slowly added with stirring.. The reaction was stirred for 1 hour at -10 C. and 2 hours at 0 C. The precipitate was collected, washed with water and dried to give 1.9 g (90% yield) of the title compound.

According to the analysis of related databases, 59-48-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Sugen, Inc.; US6350754; (2002); B2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 102359-00-2,Some common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, molecular formula is C9H7NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of 4 (1.77 g, 10 mmol) in 120 mL ofdichloromethane and 10 mL of DMF was added 4-methylmorpholine or DIEA (10 mL), TBTU (4.81 g, 15mmol) and aniline derivatives (11 mmol). The mixture wasstirred under room temperature for 18 h and washed in turnwith 5% sodium carbonate solution, 5% citric acid solutionand saturated sodium chloride solution. After dried byanhydrous sodium sulfate, the organic layer was evaporatedto dryness. The residue was purified with flash chromatography(CH2Cl2:CH3OH, 50:1) to afford intermediates 5a-5l, which were used in the next step in short time. To asolution of compounds 5a-5l (1.0 mmol) in 10 mL methanolwas added piperidine (30 muL) and 1H-pyrrole-2-carbaldehyde/furan-2-carbaldehyde (1.0 mmol). The mixturewas stirred at 60 C for 5 h and cooled to room temperature.After kept in fridge overnight, the target compounds 6a-6land 7a-7l were obtained in high yields.

The synthetic route of 102359-00-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ai, Juntao; Lv, Meng; Li, Xiaohui; Chen, Zhuo; Hu, Gaoyun; Li, Qianbin; Medicinal Chemistry Research; vol. 27; 1; (2018); p. 161 – 170;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 603-62-3, name is 3-Nitrophthalimide, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C8H4N2O4

Example 25Preparation of l-[(lalpha,5alpha,6alpha)-3-(2,4-difluorophenyl)-3-azabicyclo[3.1.0]hex-6-yl]-3-(2- methyl-l,3-dioxo-2,3-dihydro-l//-isoindol-4-yl)urea:Step 1: 2-methyl-4-nitro-lH-isoindole-l,3(2H)-dione:To a stirred solution of 4-nitro-lH-isoindole-l,3(2H)-dione (0.00520 mole) in DMF (5 mL), NaH (0.000528 mole) is added at O0C and stirred the reaction mixture at RT for 30 min. To the above at 00C, methyl iodide (0.000528 mole) is added and stirred for 2 h at room temperature. On completion of reaction, the reaction mixture is quenched with water, extracted with ethyl acetate and the organic layer dried and concentrated to get the desired product. 1H NMR (DMSO- d6): delta 3.04 (s, 3H); 8.04 (t, IH, J = 9 Hz); 8.14 (d, IH, J = 9 Hz); 8.25 (d, lH, J = 6 Hz).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 603-62-3.

Reference:
Patent; GLENMARK PHARMACEUTICALS, S.A.; WO2009/90548; (2009); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 102359-00-2, These common heterocyclic compound, 102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2-oxoindoline-5-carboxylic acid (0.200 g, 1.12 mmol), 1- [3- (dimethylamino) propyl] -3-ethylcarbodiimide hydrochloride (0.477 g, 2.47 mmol), diisopropylethylamine (0.586 mL, 3.37 mmol) and catalytic amount of N, N- dimethylaminopyridine in N, N-DIMETHYLFORMAMIDE/ACTEONITRILE (1: 1,4 mL) was added 2- methoxybenzylamine (0.295 mL, 2.26 mmol) and the reaction mixture stirred at room temperature for 1 h. The solvent was evaporated and the crude material was purified on a short silica gel column using dichloromethane containing 5% methanol as the eluent. This was followed by triturating from ethyl acetate to give 0.10 g (33% yield) of the yellow title compound : 1H NMR (DMSO-d6,400 MHz) 8 10.60 (br s, 1 H), 8.65 (t, J = 6 Hz, 1 H), 7.79-7. 77 (m, 2 1-1), 7.21 (t, J = 8 Hz, 1 H), 7.15 (d, 7= 8 HZ, 1 H), 6. 98 (d, J = 8 Hz, 1 H), 6.90-6. 84 (m, 2 H), 4.42 (d, J = 6 Hz, 2 H), 3.81 (s, 3 H), 3.53 (s, 2 H) ; MS (ES) m/z 297 (M++1), NILZ 295

The synthetic route of 102359-00-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; WO2005/27823; (2005); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 3676-85-5, name is 5-Aminoisoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3676-85-5, Recommanded Product: 3676-85-5

At room temperature,In a 25mL reaction bottle,Join in order3-aminophthalic acid imide(0.5 mmol), diphenylphosphoryl (1 mmol),TEMPO (0.05 mmol), and tetrahydrofuran 48 mmol, 2 mL), mixed evenly,The reaction is then heated to 40 C.The reaction was stirred for 12 hours.After the reaction was completed by TLC, pure water was added.Then add ethyl acetate for 3 times.The extracts are combined and the extract is dried over anhydrous sodium sulfate.The extract was concentrated under reduced pressure in vacuo (0.08 Mpa) to dryness to afford crude material.Then rinse with a mixed eluent of 3:1 by volume of petroleum ether and ethyl acetate.Silica gel column flash column chromatography,Obtaining the product of Example 4o,It was 152 mg of a yellow solid, yield 70%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Aminoisoindoline-1,3-dione, and friends who are interested can also refer to it.

Reference:
Patent; Qufu Normal University; Wei Wei; Huang Qiang; Lv Yufen; Liu Qishun; (20 pag.)CN109942627; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem