Tag: M.W=100-200

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3484-35-3, name is 5-Methylindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 5-Methylindolin-2-one

General procedure: To a solution of 3-substituted-5-benzylidene-2-thioxo-4-thiazolidinone (3a-3h, 8a-8f) (0.003 mol) in 1,4-dioxane (15 ml) was added HC(OEt)3 (2 ml) and BF3·Et2O (2 ml). The reaction mixture was heated to 80 C and stirring was continued at the same temperature for 4 h. The resulting 2-ethylthio-3-substituted-5-benzylidene-4-thiazolium fluoroborate (4a-4h, 9a-9f) was precipitated, filtered off, and dried without any additional purification, as starting material for the following reactions. To a mixture of thiazolium fluoroborate (4a-4h, 9a-9f) (0.003 mol) and indolin-2-one (11a-11f) (0.003 mol) in acetonitrile (15 ml) was added triethylamine (0.91 g, 0.009 mol) dropwise at 25 C, and the mixture was stirred for 4 h at the same temperature. The orange precipitate was collected and washed with ethyl acetate (8 ml). The crude product thus obtained was recrystallized from methanol or acetone to give compound (5a-5s, 10a-10s).

Interested yet? This just the tip of the iceberg, You can reading other blog about 3484-35-3.

Reference:
Article; Wang, Shuobing; Zhao, Yanfang; Zhang, Guogang; Lv, Yingxiang; Zhang, Ning; Gong, Ping; European Journal of Medicinal Chemistry; vol. 46; 8; (2011); p. 3509 – 3518;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , Synthetic Route of 60434-13-1

General procedure: To a mixture of ethyl acetoacetate or methyl acetoacetate (1 eqv), formaldehyde (1.1 eqv) and NH4OAc (1.5 eqv) in acetic acid (3 mL) was added FeWO4 (20 mol%) at room temperature and the mixture was heated at 80 C for 2 h (monitoring by TLC) to give poly-substituted pyridine (3), to this solution isatin (1 eqv) was added and heating continued at same temperature for 3 h (monitoring by TLC). After that the reaction mixture was cooled to room temperature neutralized with sodium bicarbonate and extracted with EtOAc (2 × 10 mL). The organic layers were washed with brine, dried using sodium sulphate .Evaporation of the solvent gave the crude product which was purified by silica gel column chromatography. Elution of the column with petroleum ether-EtOAc gave the desired product.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 60434-13-1.

Reference:
Article; Paplal, Banoth; Nagaraju, Sakkani; Sathish, Kota; Kashinath, Dhurke; Catalysis Communications; vol. 103; (2018); p. 110 – 115;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Redox catalysis has been broadly utilized in electrochemical synthesis. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis., Application of 118-29-6

To a mixture of compound 2,3,3-Trimethylindolenine (1) (2.0 g, 12.5 mmol, 1.1 eq.) and A (Hydroxymethyl)phthalimide (3) (2.02 g 11.4 mmol, 1 eq.) were added 14.7 mL of concentrated sulfuric acid and the system stirred at room temperature for 6 days. The reaction was then poured over ice and made basic with concentrated aqueous ammonium hydroxide. After crystallizing at -20 C overnight, the resulting precipitate was filtered, rinsed with ice cold water, and dried under vacuum to give indolenine 4 as a light yellow shiny crystalline solid. Yield 88.3%. XH NMR (400 MHz, CDCl3); d 7.82-7.87 (m, 2H, Ar- H); 7.67-7.72 (m, 2H, Ar-H); 7.44-7.48 (m, 1H, Ar-H); 7.35-7.42 (m, 2H, Ar-H); 4.87 (s, 2H,CH2); 2.25 (s, 3H, CH3) 1.28 (s, 6H, CH3).

The chemical industry reduces the impact on the environment during synthesis 2-(Hydroxymethyl)isoindoline-1,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; SIMBERG, Dmitri; SMITH, Weston J.; (107 pag.)WO2019/126565; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 496-12-8, New month, new HOT articles! We are pleased to share a selection of our referee-recommended HOT articles for 2021. We hope you enjoy reading these articles.

Preparation of the title compound was initiated by subjecting the product from step 2 A (0.02 g, 0.03 mmol) to isoindoline (0.01 g, 0.06 mmol) andDBU (0.01 g, 0.06 mmol) in 1 mL DCM at 45 0C for 3 h. Once complete byMS analysis, the reaction was diluted with 10 mL EtOAc and extracted withNaHCtheta3 (2 x 10 mL) and brine (2 x 20 mL). The organic phase was dried over anhydrous Na2SO4, filtered, and then concentrated in vacuo. The residue was purified by silica gel flash chromatography using 70%EtOAc/hexanes affording pyridazinone 4a. (0.01 g, 64 %).MS (ESI) m/z = 755.3 (M+H)+.

As always, wish you can browse a selection of our May HOT articles below about Isoindoline.

Reference:
Patent; ENANTA PHARMACEUTICALS, INC.; WO2008/19266; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

SDS of cas: 6341-92-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6341-92-0 as follows.

General procedure: A sealed tube was charged with isatin 1 (1a 147 mg, 1.0 mmol), ammonia hydrate 2 (25%, 421 mg, 3.0 mmol) and H2O2 (30%, 227 mg, 2.0 mmol) at room temperature, and then solvent DMSO (4 mL) was added. The resulting mixture was stirred at 30 C in a sealed vessel under air after 4 h, then added 50 mL water to the mixture, extracted with CH3COOC2H5 3 times (3 x 50 mL). The extract was washed with 30% NaCl solution (V/V), dried over anhydrous Na2SO4 and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel (Petroleum ether/Ethyl acetate = 3:1) to yield the desired product 3a as a yellow solid (89% yield).

Hope you enjoy the show about 6341-92-0.

Reference:
Article; Wang, Yu-Wei; Zheng, Lei; Jia, Feng-Cheng; Chen, Yun-Feng; Wu, An-Xin; Tetrahedron; vol. 75; 11; (2019); p. 1497 – 1503;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 3676-85-5, Researchers are common within chemical engineering and are often tasked with creating and developing new chemical techniques, frequently combining other advanced and emerging scientific areas.

Example 82 N-(2-Chlorobenzyl)-N’-(1,3-dioxo-2,3-dihydro-1H-5-isoindolyl)urea Diphenylphosphoryl azide (165 mg, 0.60 mmol, 1.2 eq) and triethylamine (61 mg, 0.60 mmol, 1.2 eq) were added to a solution of 2-chlorophenylacetic acid (85 mg, 0.50 mmol) in toluene, and the mixture was stirred at 110C for 60 min. Thereafter, 4-aminophthalimide (81 mg, 0.50 mmol, 1.0 eq) and a minor amount of DMF were added thereto, and the mixture was stirred at 110C for 2 hr. After the completion of the reaction, water and ethyl acetate were added thereto, and the precipitated crystal was collected by filtration and was washed with ethyl acetate to give the title compound as a crystal (37 mg, 22.6%). MS m/z: 329 1H-NMR delta: 4.40 (2H, d, J = 5.61 Hz), 6.94 (1H, t, J = 5.98 Hz), 7.28 – 7.38 (2H, m), 7.41 (1H, dd, J = 1.71, 7.56 Hz), 7.46 (1H, dd, J = 1.71, 7.56 Hz), 7.61 (1H, dd, J = 1.83, 8.17 Hz), 7.68 (1H, d, J = 8.54 Hz), 8.01 (1H, d, J = 1.46 Hz), 9.42 (1H, s), 11.08 (1H, s)

We are continuing to develop the new Research Structures and WebCSD systems in response to feedback from you, our user community, so we would love to hear what you think about the enhanced search functionality and any suggestions you might have about 3676-85-5.

Reference:
Patent; KIRIN BEER KABUSHIKI KAISHA; EP1256574; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 60434-13-1, name is 5-Chloro-1-methylindoline-2,3-dione, A new synthetic method of this compound is introduced below., Product Details of 60434-13-1

A mixture of 2- (1-benzyl-2-oxoindol-3-yl) acetic acid67.4 mg (0.24 mmol),5-chloro-1-methyl isatin 39 mg (0.2 mmol)N, N’-2- (7-benzo benzotriazole) -N, N, N ‘, N’-tetramethyluronium hexafluorophosphate (106.4 mg, 0.28 mmol)Triethylamine 50.6 mg (0.5 mmol)And 2 mL of tetrahydrofuran were placed in a 25 mL two-necked flask,Reaction at 0 C for 6 h,The reaction solution was concentrated,Eluting with a mixed solvent of petroleum ether: ethyl acetate ratio of 3: 1 as elution column,Collecting the eluted fraction of all the products detected,The solvent was removed by rotary distillation to give 82.4 mg of product,The yield was 90% and the Dr value was 4: 1.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 60434-13-1.

Reference:
Patent; China Pharmaceutical University; Du Ding; Cao Jing; Dong Shuding; (14 pag.)CN106749295; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 56341-37-8, name is 6-Chlorooxindole, A new synthetic method of this compound is introduced below., Quality Control of 6-Chlorooxindole

6-Chloroindolin-2-one (8.35 g, 50 mmol) and 3-chloro-2-fluorobenzaldehyde (8.295 g, 52.5 mmol) were stirred at reflux in the presence of piperidine (1 ml) for 6 hours. The reaction suspension was then filtered, and the solid obtained was washed with methanol and dried to give a yellow solid product, (E)-6-chloro-3-(3-chloro-2-fluorobenzylidene)indol2-one (14.63g, 47.5mmol). Yield: 95%. 1H NMR (400MHz, DMSO): delta 10.85 (s, 1 H), 7.70 (q, J=7.3Hz 2 H), 7.54 (s, 1 H), 7.36 (t, J=8Hz 1 H), 7.16 (d, J=8Hz 1 H), 6.92-6.86 (m, 2 H); MS: Calcd for C15H9Cl2FNO ([M+H]+): 308, found: 308.0.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6-Chlorooxindole.

Reference:
Patent; Xiao, Fei; MA, Jie; XIAO, Fei; REN, Hongjun; WANG, Wei; XU, Hongtao; WANG, Meng; ZOU, Lihui; DING, Fei; SU, Fei; (41 pag.)EP3498712; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 3676-85-5, name is 5-Aminoisoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3676-85-5, Recommanded Product: 3676-85-5

Example 88 N-(2,4-Dichlorobenzyl)-N’-(1,3-dioxo-2,3-dihydro-1H-5-isoindolyl)urea Diphenylphosphoryl azide (162 mg, 0.59 mmol, 1.2 eq) and triethylamine (60 mg, 0.59 mmol, 1.2 eq) were added to a solution of 2,4-dichlorophenylacetic acid (101 mg, 0.49 mmol) in toluene, and the mixture was stirred at 110C for 60 min. Thereafter, 4-aminophthalimide (80 mg, 0.49 mmol, 1.0 eq) and a minor amount of DMF were added thereto, and the mixture was stirred at 110C for 2.5 hr. After the completion of the reaction, water and ethyl acetate were added thereto, and the precipitated crystal was collected by filtration and was washed with ethyl acetate. The resultant crystal was washed with a chloroform/methanol solution to give the title compound as a crystal (9 mg, 5.0%). MS m/z: 363, 365 1H-NMR delta: 4.37 (2H, d, J = 4.88 Hz), 6.99 (1H, t, J= 5.22 Hz), 7.38 – 7.44 (2H, m), 7.57 – 7.63 (2H, m), 7.68 (1H, d, J = 8.29 Hz), 8.01 (1H, s), 9.46 (1H, s), 11.08 (1H, s)

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 3676-85-5.

Reference:
Patent; KIRIN BEER KABUSHIKI KAISHA; EP1256574; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., Application of 52351-75-4

General procedure: To a mixture of 2-hydroxy-1,4-naphthoquinone (1 mmol), isatin (1 mmol) and CH3COOH10 mL, 5-aminotetrazole (1 mmol) was added. The mixture was stirred at reflux for an appropriatetime (Table 2). After completion of the reaction (TLC), the reaction mixture was cooled to roomtemperature and the solvent was evaporated under reduced pressure. Then, the crude product waswashed sequentially with 20 mL saturated NaHCO3 and 20 mL brine, purified by silica gel columnchromatography using petroleum ether: ethyl acetate (v:v = 1:1) as eluent to afford the pure product 4(the copies of all spectral data see Supplementary Materials).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 52351-75-4 is helpful to your research.

Reference:
Article; Wu, Liqiang; Liu, Yunxia; Li, Yazhen; Molecules; vol. 23; 9; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem