Tag: M.W=100-200

Adding a certain compound to certain chemical reactions, such as: 324-03-8, name is 6-Fluoroindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 324-03-8, SDS of cas: 324-03-8

Weigh rapamycin (0.05mmol), isatin 3g (0.10mmol) and rhodium octanoate (0.0005mmo),They were placed in a reaction flask, 2.0 mL of dry dichloromethane was added, and after stirring at room temperature for 5 minutes,Phenyldiazo 2a (0.10 mmol) was weighed and dissolved in dry dichloromethane (1.0 mL), and slowly added dropwise to the reaction system (about 1 hour), and stirring was continued for half an hour.The solvent was removed by rotary evaporation to give a crude product. The rapamycin analog I-g was obtained by column chromatography (eluent: petroleum ether: ethyl acetate = 1:10 to 1:4).The yield was 88%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Fluoroindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Ha Yao Cihang Pharmaceutical Co., Ltd.; Changsha Tianci Bio-pharmaceutical Technology Co., Ltd.; Changsha Cihang Pharmaceutical Institute Co., Ltd.; Duan Yanwen; Huang Yong; Qiu Lin; Wen Zhongqing; Su Meng; (38 pag.)CN109776571; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 16800-68-3, These common heterocyclic compound, 16800-68-3, name is 1-Acetylindolin-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To 5-bromo-N-acetyl indoxyl (0.018 mole), Titanium isopropoxide (0.027 mole) was added under nitrogen atmosphere. The mass was stirred for 30 min at room temperature. N-Methyl piperazine (0.02 mole) was added neat to the above complex. The reaction mass was further at room temperature for 5 hr. Absolute ethanol (20 mL) was added to the thick slurry mass followed by the addition of sodium triacetoxyborohydride (0.036 mole). After completion of the reaction (TLC), the reaction mass was diluted with water (100 mL) and the precipitated titanium complex was removed by filtration. The solid on the filter was washed with ethyl acetate till colourless filtrate was obtained. The filtrate was basified with aqueous ammonia whereby compound went into organic layer. The organic layer was separated, washed with brine solution (1 x 50 mL) and dried over anhydrous magnesium sulfate. Solvent was removed under reduced pressure and the residual mass was purified by flash chromatography over silica gel using 70 % ethylacetate in n-hexane to obtain the title compound in 70% yield.

Statistics shows that 1-Acetylindolin-3-one is playing an increasingly important role. we look forward to future research findings about 16800-68-3.

Reference:
Article; Nirogi, Ramakrishna V.S.; Deshpande, Amol D.; Kambhampati, Ramasastri; Badange, Rajesh Kumar; Kota, Laxman; Daulatabad, Anand V.; Shinde, Anil K.; Ahmad, Ishtiyaque; Kandikere, Vishwottam; Jayarajan, Pradeep; Dubey; Bioorganic and Medicinal Chemistry Letters; vol. 21; 1; (2011); p. 346 – 349;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 16800-68-3, name is 1-Acetylindolin-3-one, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 1-Acetylindolin-3-one

General procedure: A 10 mL glass tube equipped with a stirring bar was charged with the isatin-derived N-Boc ketimine 1 (0.44 mmol, 1.2 equiv), the N-acetylindolin-3-one 2 (0.4 mmol, 1.0 equiv), catalyst 4o (0.02 mmol, 2 mol%) and CH2Cl2 (4.0 mL). The resulting solution was stirred at r.t. for the indicated time. The solvent was then evaporated to give the crude product, which was directly purified by flash chromatography (n-pentane/EtOAc, 4:1 to 1:1) to provide the desired products 3a-t.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 16800-68-3.

Reference:
Article; Gajulapalli, V. Pratap Reddy; Jafari, Ehsan; Kundu, Dipti S.; Mahajan, Suruchi; Peuronen, Anssi; Rissanen, Kari; Enders, Dieter; Synthesis; vol. 49; 22; (2017); p. 4986 – 4995;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 56341-37-8, name is 6-Chlorooxindole, A new synthetic method of this compound is introduced below., Quality Control of 6-Chlorooxindole

EXAMPLE 20a rac-5-[6-Chloro-2-oxo-2,3-dihydro-1H-indol-3-yl]-3,4-dihydro-2H-pyridine-carboxylic acid tert-butyl ester A suspension of 6-chlorooxindole (1.91 g, 11.4 mmol) (Cresent Chem), 1-BOC-3-piperidone (2.5 g, 12.5 mmol) (Martix Scientific), and pyrrolidine (0.1 g, 1.14 mmol) (Aldrich) in 2-propanol (30 mL) was heated at 90 C. for 2 days. The solvent was evaporated in vacuo and the residue was partitioned between ethyl acetate and water. The aqueous layer was extracted repeatedly with ethyl acetate. The organic layer was separated, combined, dried over Na2SO4 and concentrated. The residue was purified by chromatography (ethyl acetate-dichloromethane, 1:9, V/V) to give rac-5-[6-chloro-2-oxo-2,3-dihydro-1H-indol-3-yl]-3,4-dihydro-2H-pyridine-carboxylic acid tert-butyl ester as a brown solid. (Yield 2.6 g, 67%).

The synthetic route of 56341-37-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Luk, Kim-Chun; So, Sung-Sau; Zhang, Jing; Zhang, Zhuming; US2006/293319; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 3484-35-3, A common heterocyclic compound, 3484-35-3, name is 5-Methylindolin-2-one, molecular formula is C9H9NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Appropriate indolin-2-one or indoline-2-thione (0.3 g) was mixed with acetic anhydride (3 mL) and 4-dimethylaminopyridine (DMAP, 1 mol %). The mixture was heated at 150 C in a round-bottomed flask equipped with an air condenser and CaCl2 guard tube. The reaction time for each reactant is provided in [Table 2] and [Table 3]. After the completion of the reaction excess acetic anhydride was evaporated under reduced pressure. The solid residue obtained in the case of the triacetylated products was suspended in cold methanol and vacuum filtered. The product collected was thoroughly washed with hexane and dried. In the case of mono and diacetylated products the solid residue was purified using flash column chromatography (FCC) (silica gel, hexanes/ethyl acetate).

The synthetic route of 3484-35-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Jha, Mukund; Chou, Ting-Yi; Blunt, Brian; Tetrahedron; vol. 67; 5; (2011); p. 982 – 989;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 2307-00-8,Some common heterocyclic compound, 2307-00-8, name is 5-Amino-2-methylisoindoline-1,3-dione, molecular formula is C9H8N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Amino-N-methylphthalimide (1.0 g, 5.78 mmol) and 1,2-dibromoethane (2.17 mL, 25.2 mmol) were dissolved in anhydrous DMF (15 mL). The resulting reaction mixture was heated at 100 C. under argon for 12 h. After cooling to room temperature, the mixture was treated with 5 ml of saturated sodium bicarbonate and 50 mL of deionized water. Then it was extracted with EtOAc (30 mL) twice. The organic layers were combined and washed with brine, dried over MgSO4, concentrated, chromatographed on silica gel column using 30%(v/v) of EtOAc in hexane to give 13 (0.21 g, 13%): m.p. 212-214 C.; 1H NMR (CDCl3) delta 3.11 (s, 3H), 3.58 (t, 2H), 3.69 (t, 2H), 4.87 (broad, 1H), 6.75 (d, 1H), 7.00 (s, 1H), 7.60 (d, 1H). Anal. C11H11BrN2O2, calcd. C 46,67, H 3.92, N 9.89, found C 46.48, H 3.97, N 9.83.

The synthetic route of 2307-00-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Mills, Randell L.; Wu, Guo-Zhang; US2005/80260; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 56341-37-8, name is 6-Chlorooxindole, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 6-Chlorooxindole

General procedure: A reaction mixture of the proper substituted indolin-2-ones 6,aldehyde (1.2 eq.), and piperidine (0.1 eq.) in ethanol (1 mL/0.5 mmol oxindole) was refluxed for 3-5 h, under nitrogen atmosphere. After, the mixture was cooled and put on ice, where the product precipitated. The product was filtered in vacuum with cold ethanol [10,14-17]. Finally, the product was placed in the vacuum desiccators to give the expected compound. The indolin-2-ones 3e was generated through substituted isatin in the presence of hydrazine monohydrate and ethylene glycerol, under reflux [18].

According to the analysis of related databases, 56341-37-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Nunes, Rute C.; Ribeiro, Carlos J.A.; Monteiro, Angelo; Rodrigues, Cecilia M.P.; Amaral, Joana D.; Santos, Maria M.M.; European Journal of Medicinal Chemistry; vol. 139; (2017); p. 168 – 179;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41910-64-9, name is 4-Chloroindoline, A new synthetic method of this compound is introduced below., Product Details of 41910-64-9

A suspension of 4-chloroindoline (1.00 g) and D-galactose (1.94 g) in H2O (3.0 ml)-ethyl alcohol (20 ml) was refluxed for 29 hours under argon atmosphere. The solvent was evaporated under reduced pressure to give crude 4-chloro-1-(beta-D-galactopyranosyl)indoline, which was used in the subsequent step without further purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Tanabe Seiyaku Co., Ltd.; US2008/27014; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 21857-45-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 21857-45-4 as follows.

7-Benzyl-4-chloro-2-methyl-5H-pyrrolo[3,2-d]pyrimidine 11 15(0.1 g, 0.39 mmol) and 5-methoxyindoline (58 mg, 0.48 mmol) were dissolved in isopropanol (15 mL) and heated at reflux for 12 h, and the solvent was evaporated in vacuo. The crude material obtained was purified by column chromatography and eluted with 1% (v/v) MeOH/CHCl3. Fractions containing the product (TLC) were pooled, and the solvent was evaporated to afford 4 (109 mg, 76%). TLC Rf 0.4 (MeOH: CHCl3; 1:20).

According to the analysis of related databases, 21857-45-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Pavana, Roheeth Kumar; Choudhary, Shruti; Bastian, Anja; Ihnat, Michael A.; Bai, Ruoli; Hamel, Ernest; Gangjee, Aleem; Bioorganic and Medicinal Chemistry; vol. 25; 2; (2017); p. 545 – 556;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 3484-35-3 as follows. Recommanded Product: 5-Methylindolin-2-one

General procedure: To a solution of appropriate oxindole (7a-e, 0.3 mmol) in ethanol (3 mL) was added corresponding aldehydes (11a-e,0.32 mmol) and a catalytic amount of piperidine. The reaction mixture was stirred at reflux for 6-12 h (reaction monitored byTLC). After cooling, the precipitate was filtered, washed with cold ethanol, and dried in air to furnish pure (Z)-3-(3′-methoxy-4′-(2-amino-2-oxoethoxy)-benzylidene)indolin-2-ones title compounds of formula (4a-v) as yellow/brown/orange solids in moderate to excellent yields.

According to the analysis of related databases, 3484-35-3, the application of this compound in the production field has become more and more popular.

Reference:
Article; Senwar, Kishna Ram; Reddy, T. Srinivasa; Thummuri, Dinesh; Sharma, Pankaj; Naidu; Srinivasulu, Gannoju; Shankaraiah, Nagula; European Journal of Medicinal Chemistry; vol. 118; (2016); p. 34 – 46;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem