Tag: M.W=100-200

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7477-63-6, name is 7-Chloroisatin, A new synthetic method of this compound is introduced below., Product Details of 7477-63-6

General procedure: A sealed tube was charged with isatin 1 (1a 147 mg, 1.0 mmol), ammonia hydrate 2 (25percent, 421 mg, 3.0 mmol) and H2O2 (30percent, 227 mg, 2.0 mmol) at room temperature, and then solvent DMSO (4 mL) was added. The resulting mixture was stirred at 30 °C in a sealed vessel under air after 4 h, then added 50 mL water to the mixture, extracted with CH3COOC2H5 3 times (3 x 50 mL). The extract was washed with 30percent NaCl solution (V/V), dried over anhydrous Na2SO4 and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel (Petroleum ether/Ethyl acetate = 3:1) to yield the desired product 3a as a yellow solid (89percent yield).

The synthetic route of 7477-63-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wang, Yu-Wei; Zheng, Lei; Jia, Feng-Cheng; Chen, Yun-Feng; Wu, An-Xin; Tetrahedron; vol. 75; 11; (2019); p. 1497 – 1503;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1074-82-4, name is Potassium 1,3-dioxoisoindolin-2-ide, This compound has unique chemical properties. The synthetic route is as follows., name: Potassium 1,3-dioxoisoindolin-2-ide

To a solution of 240 1-(bromomethyl)-4-methylbenzene (5 g, 27 mmol) in 28 DMF (30 mL) was added 242 potassium 1,3-dioxoisoindolin-2-ide (7.51 g, 40.5 mmol). The mixture was stirred at 100 C. for 14 hours. The reaction mixture was concentrated under reduced pressure to remove DMF. The residue was purified by column chromatography (SiO2, petroleum ether:ethyl acetate=0 to 20%) to give 243 2-(4-methylbenzyl)isoindoline-1,3-dione (5.50 g, 81% yield). 1H NMR (chloroform-d 400 MHz) delta 7.85 (d, J=3.2 Hz, 2H), 7.84 (d, J=3.2 Hz, 2H), 7.34 (d, J=7.6 Hz, 2H), 7.13 (d, J=8.0 Hz, 2H), 4.82 (s, 2H), 2.32 (s, 3H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1074-82-4.

Reference:
Patent; H. Lundbeck A/S; Juhl, Karsten; Jessing, Mikkel; Langgard, Morten; Vital, Paulo Jorge Vieira; Kehler, Jan; Rasmussen, Lars Kyhn; Clementson, Carl Martin Sebastian; Marigo, Mauro; (154 pag.)US2019/194189; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 64483-69-8,Some common heterocyclic compound, 64483-69-8, name is 5-Acetylindolin-2-one, molecular formula is C10H9NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE II 1,5-diacetyl-2-indolinone 48.9 g (0.279 mol) 5-acetyl-2-indolinone are stirred in 400 ml acetic anhydride in an oil bath at 140 C. for 2 h. The starting material dissolves during this time. Then the reaction mixture is left to cool, evaporated down, the precipitate is removed by suction filtering, washed with ether and the product is dried. Yield: 56.0 g (92.4% of theory) Rf=0.41 (silica gel, methylene chloride/methanol 50:1) C12H11NO3 (MW=217.223) Mass spectrum: m/z=216 (M-H)-

The synthetic route of 64483-69-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Boehringer Ingelheim International GmbH; US2005/209302; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 40314-06-5,Some common heterocyclic compound, 40314-06-5, name is 5-Methylisoindoline-1,3-dione, molecular formula is C9H7NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 5-1Preparation of 2-(5-bromo-4-methylpyridin-3-yl)-5-methylisoindolin-1-one Step 1 A mixture of 5-methylisoindoline-1,3-dione (5.00 g, 31.0 mmol) and tin shavings (8.84 g, 74.5 mmol) in acetic acid (30 mL) and concentrated hydrochloric acid (15 mL) was heated at reflux for 3 h. The hot solution was filtered and the residual tin shavings were washed with acetic acid. The filtrate was concentrated and the residue was diluted with DCM (200 mL), and washed with water (20 mL) and brine (20 mL), dried and concentrated. The precipitate which formed during the concentration was collected by filtration and washed with DCM (5 mL) and dried under vacuum to give 5-methylisoindolin-1-one (2.3 g, 50%). 1H NMR (400 MHz, chloroform-d) delta 7.70 (1H, d, J=7.77 Hz), 7.43 (1H, s), 7.35 (1H, d, J=7.77 Hz), 4.46 (2H, s), 2.48 (3H, s). Mass spectrum m/z 148.0 (M+H)+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Methylisoindoline-1,3-dione, its application will become more common.

Reference:
Patent; Bristol-Myers Squibb Company; US2010/160303; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 1127-59-9, The chemical industry reduces the impact on the environment during synthesis 1127-59-9, name is 7-Methylindoline-2,3-dione, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of isatin (0.14 g, 1mmol), 5,5-dimethylcyclohexanedione (0.14 g, 1 mmol), 2-hydroxy-4H-benzo[4,5]thiazolo[3,2-a]pyrimidin-4-one (0.22 g, 1 mmol) and H3PW12O40 (0.06 g, 3 molpercent) in dry acetonitrile (5 ml) was refluxed. The reaction progress was monitored by thin-layer chromatography (eluent: ethylacetate/hexane (2:1)). After completion of the reaction, the reaction mixture was cooled to room temperature. Then, the precipitated product was filtered and washed with acetonitrile (10ml). The obtained crude mass was purified by column chromatography over silica gel using ethylacetate/hexane (1:1) as eluent to give the desired product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7-Methylindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Jannati, Saeideh; Esmaeili, Abbas Ali; Tetrahedron; vol. 74; 24; (2018); p. 2967 – 2972;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 603-62-3, A common heterocyclic compound, 603-62-3, name is 3-Nitrophthalimide, molecular formula is C8H4N2O4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The preparation of 2-amino-6-nitrobenzoic acid was carried out in accordance with the literature (R. Kahn, Chem. Ber. 1902, 35, 3857-3884; W. S. Saari, J. E. Schwering, J. Heterocycl. Chem. 1986, 23, 1253-1255) via regioselective opening of 3-nitrophthalimide with aqueous potassium hydroxide to give phthalamic acid and subsequent Hofmann degradation with sodium hypobromite to give the 2-amino-6-nitrobenzoic acid.

The synthetic route of 603-62-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Gruenenthal GmbH; US2008/293749; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7477-63-6, name is 7-Chloroisatin, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 7-Chloroisatin

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 °C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7477-63-6.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 2518-24-3, A common heterocyclic compound, 2518-24-3, name is 4-Aminoisoindoline-1,3-dione, molecular formula is C8H6N2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Aminoisoindoline-1,3-dione (2, 2.00 g, 12.3 mmol) was dissolved in MeOH(200 mL), and the solution was treated with N-bromosuccinimide (2.19 g,12.3 mmol). The reaction was stirred at room temperature for 50 min. The solid thatprecipitated was collected by filtration and washed with MeOH to give bromide 3(2.21 g, 9.21 mmol, 75%) as a yellow powder, mp 287-289C. 1H NMR (DMSOd6):d 11.1 (s, 1H), 7.51 (d, J D 8.9 Hz, 1H), 6.90 (d, J D 8.9 Hz, 1H), 6.53 (br s,2H); 13C NMR (DMSO-d6): d 170.0, 167.7, 146.5, 139.6, 130.2, 123.6, 112.4, 101.6;MS: m/z 240, 242 (C8H5BrN2O2, MC¢, ca. 1:1).Anal. Calcd for C8H5BrN2O2: C, 42.51; H, 1.78; N, 6.20. Found: C, 42.63; H, 1.86;N, 6.14.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Gnanasekaran, Krishna Kumar; Rivera, Mario; Bunce, Richard A.; Organic Preparations and Procedures International; vol. 50; 3; (2018); p. 372 – 374;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 32692-19-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 32692-19-6 as follows.

General procedure: We described the synthesis of the compound 1 (Table 2) to illustrate the general procedure for TFA accelerated Petasis three-component reaction. The descriptions of the preparations of all reported compounds are in the Supporting information section. To a magnetically stirred mixture of 5-nitroindoline (0.164 g, 1.0 mmol), 4-tolyboronic acid (0.135 g, 1.0 mmol), and glyoxylic acid monohydrate (0.092 g, 1.0 mmol) in CH2Cl2 (5 ml) was added TFA (20 mul). The mixture was stirred at room temperature for 4 h. After the completion of the reaction (TLC monitoring), half of the solvent was evaporated by means of a rotovap. The resulting solid was filtered through a sintered glass funnel. The collected solid was thoroughly washed with petroleum ether and a small amount of ice water (5 ml), and then dried in vacuo at room temperature for 24 h to afford 0.26 g (83.3 %) of 2-(5-nitroindolin-1-yl)-2-(p-tolyl) acetic acid as a light yellow solid.

According to the analysis of related databases, 32692-19-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Zhang, Jing; Yun, Fan; Xie, Rui; Cheng, Chunhui; Chen, Guangyao; Li, Jingxuan; Tang, Pingwah; Yuan, Qipeng; Tetrahedron Letters; vol. 57; 35; (2016); p. 3916 – 3919;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 32692-19-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 32692-19-6 as follows.

General procedure: We described the synthesis of the compound 1 (Table 2) to illustrate the general procedure for TFA accelerated Petasis three-component reaction. The descriptions of the preparations of all reported compounds are in the Supporting information section. To a magnetically stirred mixture of 5-nitroindoline (0.164 g, 1.0 mmol), 4-tolyboronic acid (0.135 g, 1.0 mmol), and glyoxylic acid monohydrate (0.092 g, 1.0 mmol) in CH2Cl2 (5 ml) was added TFA (20 mul). The mixture was stirred at room temperature for 4 h. After the completion of the reaction (TLC monitoring), half of the solvent was evaporated by means of a rotovap. The resulting solid was filtered through a sintered glass funnel. The collected solid was thoroughly washed with petroleum ether and a small amount of ice water (5 ml), and then dried in vacuo at room temperature for 24 h to afford 0.26 g (83.3 %) of 2-(5-nitroindolin-1-yl)-2-(p-tolyl) acetic acid as a light yellow solid.

According to the analysis of related databases, 32692-19-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Zhang, Jing; Yun, Fan; Xie, Rui; Cheng, Chunhui; Chen, Guangyao; Li, Jingxuan; Tang, Pingwah; Yuan, Qipeng; Tetrahedron Letters; vol. 57; 35; (2016); p. 3916 – 3919;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem