Tag: M.W=100-200

317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Application In Synthesis of 7-Fluoroisatin

This compound was prepared following the procedure of Johnson, B. L.; Rodgers, J. D. Syn. Comm. 2005, 35, 2681-2684. A suspension of 5.28 g 7-fluoroisatin in 30 mL of water was added 1.30 g NaOH, in 10 mL water with stirring. The resulting dark red solution was stirred until all of the solids dissolved and was then cooled in an ice water bath. The solution was then slowly added a cooled (ice bath) solution of 2.21 g NaNO2 in 10 mL water. These combined solutions were then added slowly to cooled (ice bath) to solution of aqueous sulfuric acid (3.4 mL H2SO4 in 60 mL water). Ice was added to maintain a temperature of approximately 0 C. After stirring for approximately 10 minutes, this dark red diazonium solution was added slowly to a chilled (0 C., ice bath) solution of 18 g SnCl22H2O in 30 mL concentrated HCl. Ice was again added to maintain a temperature of approximately 0 C. After stirring for approximately 1 hour, the reaction was filtered and the resulting residue was dissolved in 1 N NaOH (60 mL), washed with ether (2×50 mL). The resulting yellow-brown solution was cooled in an ice bath and acidified to a pH3 (litmus paper) with concentrated HCl, which resulted in the formation of a dark yellow precipitate. The precipitate was collected by filtration, washed with water, and dried over night in an oven to give 3.69 g (47%) of 7-fluoro-1H-indazole-3-carboxylic acid as an orange solid. 1H NMR (400 MHz, DMSO-d6) delta 14.35 (br s, 1H), 13.22 (br s, 1H), 7.89-7.87 (m, 1H), 7.26-7.21 (m, 2H). MS (ESI) m/z 181 (M+H)+.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pfizer Inc.; US2011/28447; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2307-00-8, name is 5-Amino-2-methylisoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Computed Properties of C9H8N2O2

4-(3-Chloro-2-hydroxypropylamino)-N-methylphthalimide Twenty-five grams (g) (0.142 mole) 4-amino-N-methylphthalimide [Flitsch, Chem. Ber. 94:2494(1961)] and 20.7 g (0.21 mole) 1-chloro-2,3-epoxypropane were added to 150 ml 2,2,2-trifluoroethanol and the reaction mixture was heated to reflux with stirring for 48 hours. Seventy to eighty ml of 2,2,2-trifluoroethanol was removed by distillation and a heavy yellow precipitate formed when the remaining solution cooled to room temperature. This precipitate was triturated with ethyl acetate, collected by filtration and dried to give 29.5 g (77% yield) of the desired phthalimide intermediate m.p. 136-138.5 C. Analysis: Calculated for C12 H13 ClN2 O3: C, 53.64; H, 4.88; N, 10.45. Found: C, 53.87; H, 4.85; N, 10.81.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Miles Laboratories, Inc.; US4261893; (1981); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 20870-79-5, These common heterocyclic compound, 20870-79-5, name is 5-Nitroindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(c) Preparation of 5-Amino-2-oxindole. The 5-nitro-2-oxindole (6.3 g) was hydrogenated in methanol over 10% palladium on carbon to give 3.0 g (60% yield) of the title compound as a white solid.

The synthetic route of 20870-79-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sugen, Inc.; US6147106; (2000); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 7477-63-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7477-63-6, name is 7-Chloroisatin, This compound has unique chemical properties. The synthetic route is as follows.

Weigh rapamycin (0.05mmol), isatin 3k (0.10mmol) and rhodium octanoate dimer(0.0005mmo),They were placed in a reaction flask, 2.0 mL of dry dichloromethane was added, and after stirring at room temperature for 5 minutes,Phenyldiazo 2a (0.10 mmol) was weighed and dissolved in dry dichloromethane (1.0 mL), and slowly added dropwise to the reaction system (about 1 hour), and stirring was continued for half an hour.The solvent was removed by rotary evaporation to give a crude product. The rapamycin analog I-k was obtained by column chromatography (eluent: petroleum ether: ethyl acetate = 1:10 to 1:4).The yield was 79percent.

The chemical industry reduces the impact on the environment during synthesis 7-Chloroisatin. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Ha Yao Cihang Pharmaceutical Co., Ltd.; Changsha Tianci Bio-pharmaceutical Technology Co., Ltd.; Changsha Cihang Pharmaceutical Institute Co., Ltd.; Duan Yanwen; Huang Yong; Qiu Lin; Wen Zhongqing; Su Meng; (38 pag.)CN109776571; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 13861-75-1, name is Spiro[cyclopropane-1,3′-indolin]-2′-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13861-75-1, Recommanded Product: 13861-75-1

A. Preparation of 5′-(1-oxopropyl)spiro-[cyclopropane-1,3′-[3H]indol]-2′(1’H)-one A slurry was made from 7.5 ml of dimethylformamide and 45.5 g of anhydrous aluminum chloride. The temperature rose to 40 C. and 2.97 ml of propionyl chloride and 5.43 g of spiro[cyclopropane-1,3′-[3H]-indol]-2′(1’H)-one were added. The mixture was stirred for 2 hours at 70 C. and was slowly poured into a mixture of ice and 50 ml of concentrated hydrochloric acid. After cooling overnight, the resulting precipitate was recovered by filtration. Crystallization from ethyl acetate provided 4.9 grams of the desired subtitle intermediate, m.p. 183-185 C. Analysis for C13 H13 NO2: Calculated: C, 72.54; H, 6.09; N, 6.51; Found: C, 72.47; H, 6.14; N, 6.42.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Eli Lilly and Company; US4617302; (1986); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6341-92-0, name is 6-Chloroisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Safety of 6-Chloroisatin

153.8 mg (0.85 mmol) 6-chloroisatin, 102.1 mg (1.02 mmol) 2,4-pentanedione, 50 mL toluene and 5 mL DMF as solvent, 13.6 mg KMnO4 and 7.5 mg MnO2, and 20 mg strong acid ion exchange resin D001 as catalyst were added to a 100 mL round flask. The mixture was stirred and heated at 115 C. for 9 hours. The reaction was monitored with TLC. When TLC indicated that reaction was complete, heating was removed. The reaction mixture was concentrated, filtered, and washed with toluene to obtain 127.2 mg desired product (compound 8), a yield of 56.9%. 1H-NMR (300 MHz, DMSO-d6) delta (ppm): 10.87 (1H, s), 7.21 (1H, d), 6.85 (1H, s), 6.73 (1H, d), 2.28 (3H, s), 2.23 (3H, s); 13C-NMR (75 MHz, DMSO-d6) delta (ppm): 165.5, 164.1, 153.5, 136.8, 128.4, 126.3, 121.3, 115.9, 106.3, 92.5, 23.9, 11.8; MS (ESI) for (M+Na)+: 286.0.

The synthetic route of 6341-92-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SHAANXI UNIVERSITY OF SCIENCE AND TECHNOLOGY; Liang, Chengyuan; Tian, Danni; Jia, Minyi; (11 pag.)US10035808; (2018); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7699-18-5, name is 5-Methoxyindolin-2-one, A new synthetic method of this compound is introduced below., name: 5-Methoxyindolin-2-one

5-Methoxyisatin (5.0 g) and 30 mL hydrazine hydrate were heated to reflux for 15 minutes. The reaction mixture was cooled to room temperature and 50 mL water was added. The mixture was extracted 3 times with 25 mL of ethyl acetate, the organic layers were combined, dried over anhydrous sodium sulfate and concentrated to give a yellow solid. The solid was stirred in ethyl acetate and 1.1 g of insoluble material removed by vacuum filtration and saved. This material proved to be 2-hydrazino-carbonylmethyl-4-anisidine. The filtrate was concentrated and chromatographed on silica gel eluding with ethyl acetate:hexane 1:1 to give 0.7 g of 5-methoxy-2-oxindole as a dirty yellow solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Sugen, Inc.; US6878733; (2005); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 15861-23-1, A common heterocyclic compound, 15861-23-1, name is Indoline-5-carbonitrile, molecular formula is C9H8N2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 5-cyanoindoline (70 mg, 0.487 mmol) and 2′-formylbiphenyl-2,4-dicarboxylic acid 4-ethyl ester 2-methyl ester (0.512 mmol) in 4 mL DCE was stirred for 10 min followed by addition of sodium triacetoxyborohydride (0.155 g, 1.5 eq.). Stirring was continued at rt overnight under N2. Reaction was quenched by addition of 1M NaOH then extracted 3× with CH2Cl2. Combined extracts were washed with brine, dried over anh. Na2SO4, filtered and evaporated. Flash silica gel chromatography (hexane/ethyl acetate 85:15) provided the product (0.164 g, 76%) as a white, sticky foam. 1H NMR (CDCl3, 300 mHz) delta 8.58 (s, 1H), 8.14 (d, 1H, J=8.4 Hz), 7.36-7.30 (m, 4H), 7.18-7.13 (m, 4H), 6.00 (d, 1H, J=8.4 Hz), 4.44 (q, 2H, J=7.3 Hz), 4.07 (m, 2H), 3.64 (s, 3H), 3.29 (m, 2H), 2.90 (m, 2H), 1.44 (t, 3H, J=7.3 Hz). LRMS (API+) m/z 441.2 (M+H)+ [100].

The synthetic route of 15861-23-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Smallheer, Joanne M.; Quan, Mimi L.; Wang, Shuaige; Bisacchi, Gregory S.; US2004/220206; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 324-03-8, name is 6-Fluoroindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Safety of 6-Fluoroindoline-2,3-dione

EXAMPLE 16 Sodium hydride (80% in oil; 0.36 g) was added portionwise to a stirred solution of 6-fluoro-1H-indole-2,3-dione (2 g) in dry dimethylformamide (25 ml). After effervescence had ceased, ethyl bromoacetate (2 g) was added dropwise at 25 to the stirred solution. The orange mixture was stirred at room temperature for 18 hours and then poured into ice-water. The precipitated solid was filtered off, washed with water and dried. 1-(ethoxycarbonylmethyl)-1H-indole-2,3-dione, mp 168-169. (Compound 16).

According to the analysis of related databases, 324-03-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Schering Agrochemicals Limited; US5093364; (1992); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 14192-26-8, name is Methyl 2-oxoindoline-6-carboxylate, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 14192-26-8, Formula: C10H9NO3

Intermediate Ia (9.Og, 47mmol), 2-ethoxybenzaldehyde (6.60 mL, 47mmol) and piperidine (2mL) are dissolved in methanol (100 mL) and heated under reflux for 2 hours. The solution is allowed to cool to room temperature and the resulting precipitate is collected via filtration and washed with methanol and then ether and dried under reduced pressure to give the desired product 1-01 (13.4g).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-oxoindoline-6-carboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; BOEHRINGER INGELHEIM PHARMA GMBH & CO. KG; WO2006/64044; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem