Tag: M.W=200-300

Electric Literature of 2058-72-2,Some common heterocyclic compound, 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, molecular formula is C9H6BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A solution of 6 g (0.05 mol) of 4-aminophenol in a mixture of 50 mL of water and 15 mL of 32% hydrochloric acid was cooled on an ice bath to 0C. At continuous stirring maintaining the temperature below 5C a solution was added of 4 g (0.055 mol) of sodium nitrite in 15 mL of water. The obtained solution of a diazonium salt was stirred for 40 min. It was then added to a cooled to -5C solution of tin(II) chloride obtained by dissolving 30 g of tin in a mixture of 50 mL of water and 100 mL of 32% hydrochloric acid. After stirring for 2 h to the reaction mixture was added a solution of 0.05 mol of an appropriate isatin in a sufficient amount of 2-propanol, also a solution was added of 6 g (0.07 mol) of sodium acetate in 35 mL of water. The mixture obtained was stirred for 2 h, heated to 50C, and left standing for crystallization. The separated precipitate was filtered off and several times washed with water on the filter. The filtrate was additionally diluted with water, the separated precipitate was filtered off, washed with water on the filter, the precipitates were combined and dried.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromo-1-methylindoline-2,3-dione, its application will become more common.

Reference:
Article; Murashevich; Nichik; Zamyatina; Toropin; Burmistrov; Russian Journal of Organic Chemistry; vol. 52; 5; (2016); p. 650 – 654; Zh. Org. Khim.; vol. 52; 5; (2016); p. 665 – 669;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 675109-26-9, These common heterocyclic compound, 675109-26-9, name is 6-Bromoisoindolin-1-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation 63: 6-(4,4,5,5-tetramethyl-1 ,3,2-dioxaborolan-2-yl)-2,3-dihydro-1 H-isoindol-1 – one (1578) (1579) A stirred mixture of 6-bromo-2,3-dihydro-1 H-isoindol-1 -one (780 mg, 3.68 mmol), (1580) bis(pinacolato)diboron (1.089 g, 4.28 mmol) and potassium acetate (1.26 g, 12.87 mmol) anhydrous 1 ,4-dioxane (12 mL) was degassed with nitrogen for 5 minutes. 1 ,1′- bis(diphenylphosphino)ferrocene-palladium(ll)dichloride dichloromethane complex (150 mg, 0.18 mmol) was then added and the reaction heated under nitrogen at 100C for 16 hours. After cooling to room temperature the mixture was diluted with water and extracted with EtOAc (x3). The combined organic layers were washed with brine, dried over MgS04, filtered and concentrated under vacuum to yield the title compound (1.1 g, 115 %) which was used crude without purification. MS: [M+H]+ = 260.

Statistics shows that 6-Bromoisoindolin-1-one is playing an increasingly important role. we look forward to future research findings about 675109-26-9.

Reference:
Patent; OTSUKA PHARMACEUTICAL CO., LTD.; BERDINI, Valerio; BUCK, Ildiko Maria; DAY, James Edward Harvey; GRIFFITHS-JONES, Charlotte Mary; HEIGHTMAN, Thomas Daniel; HOWARD, Steven; MURRAY, Christopher William; NORTON, David; O’REILLY, Marc; WOOLFORD, Alison Jo-Anne; COOKE, Michael Liam; COUSIN, David; ONIONS, Stuart Thomas; SHANNON, Jonathan Martin; WATTS, John Paul; (867 pag.)WO2017/68412; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6941-75-9 as follows. SDS of cas: 6941-75-9

General procedure: The mixture of 4-bromophthalimide (225 mg, 1 mmol), 4-RPhSH(3 mmol), K2CO3 (136 mg, 1 mmol) and CuI (10 mg) was added to DMF (10 mL). The solution was heated at 130 C for 6 h under the protection of nitrogen. After cooled, water (30 mL) was added and the precipitation was filtered, washed with water. The product was purified by column chromatography on silica gel using dichloromethane/acetone (60:1).

According to the analysis of related databases, 6941-75-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Li, Xiangqian; Liang, Xiaomeng; Song, Ting; Su, Pengchen; Zhang, Zhichao; Bioorganic and Medicinal Chemistry; vol. 22; 21; (2014); p. 5738 – 5746;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 6326-79-0,Some common heterocyclic compound, 6326-79-0, name is 6-Bromoisatin, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A chilled (O 0C) aqueous solution of NaNO2 (6.1 g, 88.5 mmol, 27 mL of water) was added to a chilled (0 “C) solution of commercially available compound HI (20 g, 88.5 mmol) in aqueous NaOH (96 mL, 96 mmol, 1 N). The combined solutions were added slowly to chilled aqueous H2SO4 (9.2 mL of cone. H2SO4, 80 mL of water) by means of an addition funnel with the tip below the surface of the acid solution Ice was added to the reaction to maintain 0 ‘C and ether was added to control foaming, as needed. After stirring an additional 10 min, the diazonium solution was added slowly to a chilled mixture of SnCI2-2H2O (50 g, 221 mmol) in concentrated HCI (80 mL) by means of an addition funnel with the tip below the surface of the acid solution. Ice was added to the reaction to maintain 0 C and ether was added to control foaming, as needed. After stirring an additional hour at 0 C, the reaction mixture was stirred at room temperature overnight. Filtered, the golden yellow powder was dissolved in aqueous NaOH, washed with ether, precipitated with aqueous HCI, filtered, and dried to give 20 g of crude compound H2 as yellow powder used into the following reaction without the further purification.

The synthetic route of 6326-79-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PHENEX PHARMACEUTICALS AG; KREMOSER, Claus; ABEL, Ulrich; STEENECK, Christoph; KINZEL, Olaf; WO2011/20615; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 20870-78-4,Some common heterocyclic compound, 20870-78-4, name is 5-Bromoindolin-2-one, molecular formula is C8H6BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 51 5-(5-Bromo-2-oxo-1,2-dihydroindol-3-ylidenemethyl)-2,4-dimethyl-1H-pyrrole-3-carboxylic Acid (2-diethylamino-ethyl)amide 5-Bromo-1,3-dihydroindol-2-one (0.17 g, 0.8 mmol) was condensed with 5-formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (2-diethylaminoethyl)amide (0.2 g) to give 0.09 g (26%) of the title compound as a yellow solid. 1H-NMR (360 MHz, DMSO-d6) delta 13.61 (s, br, 1H, NH), 10.98 (, br, 1H, NH), 8.09 (d, J=1.7 Hz, 1H, H-4), 7.76 (s, 1H, H-vinyl), 7.42 (t, J=5.5 Hz, 1H, CONHCH2), 7.24 (dd, J=1.7 & 8.0 Hz, 1H, H-6), 6.82 (d, J=8.0 Hz, 1H, H-7), 3.23-3.32 (m, 2H, NCH2), 2.46-2.55 (m, 6H, 3*NCH2), 2.43 (s, 3H, CH3), 2.42 (s, 3H, CH3), 0.96 (t, J=7.2 Hz, 6H, 2*NCH2CH3). MS-EI m/z 458 and 460 [M+-1 and M++1].

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromoindolin-2-one, its application will become more common.

Reference:
Patent; Pharmacia Corporation; US2003/216410; (2003); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., name: 2-(Bromomethyl)isoindoline-1,3-dione

0.021 mol (4.99 g) of 2-(bromomethyl)-1H-isoindole-1,3(2H)-dione ( Sigma-Aldrich) was added to a solution of 4.04 g (0.020 mol) of the compound XA0 obtained in substage 1.1) of Example 1 in 35 ml of acetone (Sigma-Aldrich), in an ice bath (highly exothermic reaction). Once the addition was complete, the reaction medium was stirred at ambient temperature for 3 hours and then filtered. The filtrate was concentrated under vacuum in order to obtain the expected product XA2 in the form of a yellow oil (5.84 g, yield 91%) which will be used in the following stage without purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE; UNIVERSITE TOULOUSE III – Paul Sabatier; COUTELIER, Olivier; DESTARAC, Mathias; LANGLAIS, Marvin; (16 pag.)US2019/359603; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 6941-75-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6941-75-9 as follows.

(B) Synthesis of Compound 31-c 194 ml of fuming nitric acid (fum. HNO3) was added to 0.9 L of concentrated sulfuric acid under stirring and cooling in an ice water bath. The mixture was stirred for 1 hour under cooling in an ice water bath, and then 215 g of Compound 31-a was added slowly to the mixture in portions over 30 minutes, while an inside temperature was maintained at 15 C. or lower. After completion of the addition, the mixture was stirred at room temperature for 8 hours. The reaction liquid was poured into 1 L of ice water, to precipitate crystals. After stirring, the crystals were collected through filtration, and washed with running water. The thus-obtained crude crystals of Compound 31-b were transferred to another flask without purification. 1 L of DMF was added thereto, and the whole was stirred at room temperature. To the resultant suspension, 200 ml of 25% ammonia water was added under stirring, and the mixture was stirred at room temperature for 3 hours. The crystals were collected through filtration, and added to 1.5 L of isopropyl alcohol. The mixture was refluxed under heating for 30 minutes, and then stirred at room temperature for 3 hours. The crystals were collected through filtration, washed with running hexane, and dried, to thereby obtain 131 g (48% yield from Compound 31-a) of Compound 31-c.

According to the analysis of related databases, 6941-75-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; FUJI PHOTO FILM CO., LTD.; US2006/142553; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 2058-72-2

General procedure: 11H-indeno[1,2-b]quinoxalin-11-one 2a (0.23?g, 1.00?mmol) and TosMIC (0.20?g, 1.10?mmol) was poured into the mixture of ethanol (1.00?mL) and K2CO3 (0.14?g, 1.00?mmol), and stirred for 10?min?at ambient temperature. After that, the reaction mixture was diluted with water (3.00?mL), the resulting precipitate was filtered, and washed with water.

According to the analysis of related databases, 2058-72-2, the application of this compound in the production field has become more and more popular.

Reference:
Article; Shaabani, Ahmad; Sepahvand, Heshmatollah; Bazgir, Ayoob; Khavasi, Hamid Reza; Tetrahedron; vol. 74; 49; (2018); p. 7058 – 7067;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 6326-79-0, These common heterocyclic compound, 6326-79-0, name is 6-Bromoisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 6-bromorsatin (CASNo. 6326-79-0, 4 52 g, 20 0 mmol) in acetonrtrile (150 mL) was added potassium carbonate (11 1 g, 80 mmol) followed by iodomethane (2 75 mL, 44 0 mmol) The reactron was then placed at 60 C and stirred for 40 minutes The reaction was then cooled to room temperature, tittered and concentrated to 10% of the original volume The reaction was then diluted with dichloromethane, water and brine The layers were separated and the aqueous layer was extracted two additional times with dichloromethane. The organic extracts were combined, dried over anhydrous sodium sulfate filtered and concentrated to provide 6-bromo-1-methyl-1 H-iotandole-2,3- dione as an orange solid without the need for further punfication The beta-bromo-1-methyl- 1 H-iotandole-2,3-diotaone (1 0 g, 4 2 mmol) was then treated with hydrazine hydrate (7 0 mL, 225 mmol) The reaction was heated to 130 C and stirred for 80 minutes, at which time the reaction was placed at room temperature and cooled by the addition of ice Once the reaction was cooled to room temperature it was diluted with dichloromethane and water and the layers were separated The aqueous layer was extracted an additional two times with dichloromethane, and the organic layers were combined, dried over anhydrous sodium sulfate, filtered and concentrated The resulting residue was purified by silica gel flash chromatography (ethanol-dichloromethane 0 to 2%) to afford 6-bromo- 1-methyl-1 ,3-diotahydro-mdol-2-one, MS (ES+) m/z 225 9 (IvH-H)*

The synthetic route of 6326-79-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; ADAMS, Christopher Michael; CHAMOIN, Sylvie; HU, Qi-Ying; ZHANG, Chun; WO2010/130794; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 6326-79-0, A common heterocyclic compound, 6326-79-0, name is 6-Bromoisatin, molecular formula is C8H4BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To R4 (500 mg, 2.21 mmol) in acetonitrile (15 mL) is added Mel (0.303 mL, 4.87 mmol) and K2CO3 (1.2 g, 8.68 mmol) and the reaction mixture stirred at 60 C for 45 min DCM and water is added and the aqueous layer extracted twice with DCM, the combined organic layers are washed with brine, dried and concentrated. Yield 65%. m/z 240/242 [M+H]+, rt 0.49 min, LC-MS Method b.

The synthetic route of 6326-79-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GRUNDL, Marc; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; RIETHER, Doris; WIENEN, Wolfgang; WO2013/41497; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem