Tag: M.W=200-300

Related Products of 118289-55-7, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 118289-55-7 as follows.

General procedure: A mixture of 6-chloro-5-(2-chloroethyl)-1,3-dihydro-2H-indol-2-one 1 (1.00mol), potassium carbonate (1.20mol), secondary amine (2a-h, 1.30mol) in water (10mL) was refluxed until completion (TLC, about 24-48h) and the reaction mass was cooled to RT and then extracted with DCM to get crude 3a-h. Recrystallized using aqueous acetone or aqueous ethanol or methanol (Yield 55-70%).

According to the analysis of related databases, 118289-55-7, the application of this compound in the production field has become more and more popular.

Reference:
Article; Meti, Gangadhar Y.; Kamble, Atulkumar A.; Kamble, Ravindra R.; Somagond, Shilpa M.; Devarajegowda; Kumari, Sandhya; Kalthur, Guruprasad; Adiga, Satish K.; European Journal of Medicinal Chemistry; vol. 121; (2016); p. 221 – 231;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 5332-26-3, A common heterocyclic compound, 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, molecular formula is C9H6BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3.5 g (87 mmol) of sodium hydride are added portionwise to a solution of 25 g (87 mmol) of dimethyl 2-(4-tert-butoxycarbonylpiperazin-1-yl)malonate in 250 ml of tetrahydrofuran cooled to 2 C. The reaction medium is stirred at ambient temperature for 30 minutes and then brought back to 2 C., before adding, dropwise, 21 g (87 mmol) of 2-bromomethylisoindole-1,3-dione in 200 ml of tetrahydrofuran. The reaction medium is stirred at ambient temperature for 20 h, treated by adding 500 ml of water and then extracted with ethyl acetate. The organic phase is dried over magnesium sulfate, filtered, and concentrated under vacuum. [0193] The crude product obtained is purified by chromatography on silica gel, elution being carried out with a 70/30 heptane/ethyl acetate mixture. 27.5 g (73%) of dimethyl 2-(4-tert-butoxycarbonylpiperazin-1-yl)-2-(1,3-dioxo-1,3-dihydroisoindol-2-ylmethyl)malonate are obtained in the form of a white solid.

The synthetic route of 5332-26-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GALDERMA RESEARCH & DEVELOPMENT; MOUNIER, Carine; Carlavan, Isabelle; Aubert, Jerome; Jomard, Andre; Rossio, Patricia; US2014/275108; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 5332-26-3,Some common heterocyclic compound, 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, molecular formula is C9H6BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The benzofused N-heteroaromatic alkynes 2, 5, and 8 weresynthesized by reacting benzimidazole (1.0 mmol),benzotriazole (1.0 mmol), or carbazole (1.0 mmol) withpropargyl bromide (1.2 mmol) in the presence of potassiumcarbonate (2.0 mmol) using dimethylformamide bycontinuous stirring at 10-25 C up to 8-10 h [32]. For thesynthesis of target compounds, solution of aromatic bromides(1.0 mmol) in dimethylformamide was taken in around-bottomed flask and aqueous solution of sodium azide(3.0 mmol) was added, thereafter, stirred the reactionmixture for 1 h at 25-40 C. To the above reaction mixture,benzofused N-heteroaromatic alkyne 2 (1.0 mmol), 5(1.0 mmol), or 8 (1.0 mmol) was added followed by coppersulfate pentahydrate (5 mol %) and sodium ascorbate(10 mol %) [33], then, stirred the reaction contents overnight.The progress of reaction was monitored by thin layerchromatography. After the completion of reaction, ice-colddistilled water was added to the reaction mixture andproduct was extracted with ethyl acetate (50 cm3 9 3).The organic layer was washed with aqueous ammoniasolution followed by brine solution and dried using anhydroussodium sulfate. Filtered and evaporated the solventunder vacuum to get crude product which was furtherpurified by column chromatography using hexane:ethylacetate (7:3) as eluent.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(Bromomethyl)isoindoline-1,3-dione, its application will become more common.

Reference:
Article; Kaushik; Kumar, Krishan; Lal, Kashmiri; Narasimhan, Balasubramanian; Kumar, Ashwani; Monatshefte fur Chemie; vol. 147; 4; (2016); p. 817 – 828;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 18711-13-2, A common heterocyclic compound, 18711-13-2, name is 4,7-Dichloroindoline-2,3-dione, molecular formula is C8H3Cl2NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example II-96 : (2-Oxo-1, 2-dihydro-pyrimidin-5-yl)-acetic acid [(3Z)-4,7-dichloro-2-oxo-1,2- DIHYDRO-INDOL-3-YLIDENE]-HYDRAZIDE [0639] The (at)TURE OF (2-OXO-1,2-DIHYDRO-PYRIMIDIN-5-YL)-ACETIC ACID HYDRAZIDE (67 MG, 0. 4 mmol) and 4,7-dichloro-isatin (95 mg, 0.44 mmol) in AcOH (10 mL) was stirred at 100″C FOR 3 h. After removal of the solvent, the residue was CRYSTALLIZED FROM MEOH TO GIVE THE TITLE compound as yellow solid (45 mg, 31%). [0640] H-NMR (400 MHz, DMSO-d6) 612. 68 (s, 1H), 11.92 (s, 1H), 8.41 (s, 2H), 7.46 (d, 1H), 7.16 (d, 1H), 4.00 (s, 2 H); MS (m/z) 366 [M+1].

The synthetic route of 18711-13-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUGEN, INC.; WO2005/5378; (2005); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, A new synthetic method of this compound is introduced below., HPLC of Formula: C10H9Cl2NO

EXAMPLE 3; 5-(2-(4-Benzo[d]isothiazol-3-yl)piperazin-1-yl)ethyl)-6-chloro-1,3-dihydro-2H-indol-2-one hydrochloride. (I); A reactor is loaded with 131 g (0.57 mol) of 6-chloro-5-(2-chloro-ethyl)-1,3-dihydro-indol-2-one, 125 g (0.57 mol) of piperazinyl benzoisothiazole, 260 ml of dimethylsulfoxide, 26 ml of water and 4.3 g (0.0285 mols) of Nal. The reaction mixture is added with 103 g (0.969 mol) of Na2CO3, with stirring under nitrogen atmosphere. The resulting mixture is heated to about 115-125 C. in 1 h and kept at said temperature under stirring for approx. 1 hr 45 min, then cooled and slowly added in about 25 min with isopropyl alcohol (650 ml), at a temperature of about 110 C., then slowly cooled at 25 C. The filtrate and the precipitate are washed with isopropyl alcohol (2×130 ml) to obtain 310 g of 5-(2-(4-benzo[d]isothiazol-3-yl) piperazin- 1-yl)ethyl)-6-chloro- 1,3-dihydro-2H-indol-2-one free base, as a crystalline solid. The resulting product is placed in a 3 L beaker with 1500 ml of purified water, and 150 ml of 32% HCl are dropped therein with stirring. The reaction mixture is kept under stirring for 10 min, filtered, washed with purified water (2×500), dried to give 260 g of 5-(2-(4-benzo[d]isothiazol-3-yl) piperazin- 1-yl)ethyl)-6-chloro- 1,3-dihydro-2H-indol-2-one hydrochloride, as a crystalline solid.

The synthetic route of 118289-55-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DIPHARMA S. P. A.; LUNDBECK PHARMACEUTICALS ITALY S. P. A.; US2007/117810; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 552330-86-6, name is 5-Bromoisoindolin-1-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 552330-86-6, category: indolines-derivatives

5-Bromo-2,3-dihydro-isoindol-l-one (230mg, 1.08mmol), bis(pinacolato)diboron(300mg, l.ldeltammol), PdCl2dppf (25mg, 31mumol) and KOAc (320mg, 3.26mmol) are suspended in dioxane (4mL), purged with nitrogen for 5 minutes and then heated at 850C overnight. The solvent is removed in vacuo and the residue partitioned between ethyl acetate and water. The aqueous layer is extracted with ethyl acetate (3x) and the combined organic phases are washed once with brine, filtered through MgStheta4 and evaporated. The solid residue is triturated with hexane and dried in vacuo to yield the title compound (185mg, 66 %) as a grey solid. 1H-NMR (400MHz, CDCl3) delta(ppm) 1.37 (12H, s), 4.45 (2H, s), 6.38 (IH, br s), 7.87 (IH, d), 7.93 (2H, m).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; GALAPAGOS N.V.; WO2007/138072; (2007); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6780-38-7, name is 2-(1,3-Dioxoisoindolin-2-yl)acetyl chloride, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C10H6ClNO3

84.1To a solution of 2-amino-nicotinamide [13438-65-8](3.0 g, 21.9 mmol) in CH2Cl2 (120 ml) and pyridine (10.56 ml, 131.3 mmol) was added phthalyl-glycyl-chloride (5.87 g, 26.3 mmol) at 0 C. The solution turned to a white suspension while stirring 0.5 hours at 0 C. and 1 hour at ambient temperature. The solid was filtrated and washed with CH2Cl2 to obtain 2-[2-(1,3-dioxo-1,3-dihydro-isoindol-2-yl)-acetylamino]-nicotinamide (7.10 g, 21.9 mmol; 100%) as white solid. MS (m/e): 325.1 [M+H+].

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6780-38-7.

Reference:
Patent; Conte, Aurelia; Dehmlow, Henrietta; Grether, Uwe; Kratochwil, Nicole A.; Kuehne, Holger; Narquizian, Robert; Panousis, Constantinos; Peters, Jens-Uwe; Ricklin, Fabienne; Roever, Stephan; US2007/275987; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5332-26-3, Recommanded Product: 5332-26-3

General procedure: The benzofused N-heteroaromatic alkynes 2, 5, and 8 weresynthesized by reacting benzimidazole (1.0 mmol),benzotriazole (1.0 mmol), or carbazole (1.0 mmol) withpropargyl bromide (1.2 mmol) in the presence of potassiumcarbonate (2.0 mmol) using dimethylformamide bycontinuous stirring at 10-25 C up to 8-10 h [32]. For thesynthesis of target compounds, solution of aromatic bromides(1.0 mmol) in dimethylformamide was taken in around-bottomed flask and aqueous solution of sodium azide(3.0 mmol) was added, thereafter, stirred the reactionmixture for 1 h at 25-40 C. To the above reaction mixture,benzofused N-heteroaromatic alkyne 2 (1.0 mmol), 5(1.0 mmol), or 8 (1.0 mmol) was added followed by coppersulfate pentahydrate (5 mol %) and sodium ascorbate(10 mol %) [33], then, stirred the reaction contents overnight.The progress of reaction was monitored by thin layerchromatography. After the completion of reaction, ice-colddistilled water was added to the reaction mixture andproduct was extracted with ethyl acetate (50 cm3 9 3).The organic layer was washed with aqueous ammoniasolution followed by brine solution and dried using anhydroussodium sulfate. Filtered and evaporated the solventunder vacuum to get crude product which was furtherpurified by column chromatography using hexane:ethylacetate (7:3) as eluent.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-(Bromomethyl)isoindoline-1,3-dione, and friends who are interested can also refer to it.

Reference:
Article; Kaushik; Kumar, Krishan; Lal, Kashmiri; Narasimhan, Balasubramanian; Kumar, Ashwani; Monatshefte fur Chemie; vol. 147; 4; (2016); p. 817 – 828;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 18711-13-2, These common heterocyclic compound, 18711-13-2, name is 4,7-Dichloroindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3-(2-(4-(Azetidin-l-yl)phenyl)-2-oxoethyl)-4,7-dichloro-3-hydroxyindolin-2-one (E To 4,7-dichloroindoline-2,3-dione (A) (300 mg, 1.39 mmol) in 15 niL of methanol were added l-(4-(azetidin-l-yl)phenyl)ethan-l-one (B) (972 mg, 5.5 mmol) and a few drops of diethylamine (2). The reaction was stirred at rt for 24 hours. The solvent was removed and the residue was purified with flash chromatography (0-5% Methanol/CH2C12) to get an off white solid. 3-(2-(4-(Azetidin-l-yl)phenyl)-2-oxoethyl)-4,7-dichloro-3-hydroxyindolin-2-one (EXAMPLE 13): off-white solid; 1H NMR (DMSO-d6, 400 MHz) delta 2.32 (m, 2H), 3.51 (d, 1H, J=16 Hz), 3.95(m, 4H), 4.30 (d, 1H, J=16Hz), 6.35(s, 1H), 6.36 (d, 2H, J=8Hz), 6.87 (d, 1H, J=8Hz), 7.28 (d, 1H, J=8Hz), 7.73 (d, 2H, J=8Hz), 10.89 (s, 1H).

Statistics shows that 4,7-Dichloroindoline-2,3-dione is playing an increasingly important role. we look forward to future research findings about 18711-13-2.

Reference:
Patent; TOKALAS, INC.; VERNIER, Jean-michael; (82 pag.)WO2016/57698; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C9H4F3NO3

General procedure: A mixture of beta-nitrostyrenes, isatin and tyrosine (1:1:1) was stirredunder heating at 100 C for 1 h in [bmim]Br (200 mg). After the reaction was completed, 10 mL of ethyl acetate was added to the reaction mixture and stirred for 15 min. The organic layer was separated, washed with water, and dried. The cycloadduct was further purified using hexane: ethyl acetate (3:2 v/v) as eluent employing column chromatography technique. After extraction of the cycloadduct, [bmim]Br wasdried under vacuum at 80 C for 2 h to exclude any water trapped from moisture and reused for subsequent runs.

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Kumar, Raju Suresh; Almansour, Abdulrahman I.; Arumugam, Natarajan; Mohammad, Faruq; Kotresha; Menendez, J. Carlos; Bioorganic and Medicinal Chemistry; vol. 27; 12; (2019); p. 2487 – 2498;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem