Tag: M.W=200-300

Adding a certain compound to certain chemical reactions, such as: 435273-55-5, name is 4-Bromo-2-methylisoindolin-1-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 435273-55-5, HPLC of Formula: C9H8BrNO

; 4-Bromo-2-methylisoindolin-l-one (60 mg, 0.26 mmol) obtained in Step3, 2-formylphenylboronic acid (48 mg, 0.32 mmol), tetrakis(triphenylphosphine)palladium (12 mg, 0.01 mmol) and cesium carbonate (259 mg, 0.80 mmol) were dissolved in a 1 mi ethanol-2 mi toluene mixture and placed in a vessel. The vessel was sealed using aseptum, and heated for 10 min at 150C in a microwave reactor and cooled to room temperature. The reaction mixture was filtered through a cellite column while washing with ethyl acetate, and the solvent was evaporated under a reduced pressure. The resulting residue was subjected to silica gel column chromatography to obtain 5-methyldibenzoindol-4(5H)-one (62 mg (99%)).1H NMR (300 MHz, CDCl3) delta 8.62-8.51 (m, 2H), 8.12-8.08 (m, IH), 7.90-7.80 (m, 2H), 7.65-7.54 (m, 2H), 7.10 (s, IH), 3.52 (s, 3H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; WO2009/51417; (2009); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 6941-75-9, These common heterocyclic compound, 6941-75-9, name is 5-Bromoisoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Toa solution of 4a (10.0 g, 35.3 mmol)in MeOH (200 mL) was added 8M KOH solution (20 mL) and then heated to reflux.After 36 h, the reaction mixture was concentrated under reduced pressure.The mixture was diluted with H2O (100 mL), extracted with EA (75 mL×2), dried over Na2SO4 and concentrated under reducedpressure. The residue was dissolved in THF (100 mL). Di-tert-butyldicarbonate (9.0 g, 41.2 mmol) and DMAP (0.5 g, 4.0 mmol) was added and thenthe reaction mixture was stirred at room temperature for 4 h. Afterconcentration, the residue was purified by silica gel column chromatography(PET/EA = 15:1, v/v) to affordcompound 5a as colorless oil (8.3 g,75.5%).

The synthetic route of 6941-75-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sun, Zhaozhu; Zhou, Tian; Pan, Xuan; Yang, Ying; Huan, Yi; Xiao, Zhiyan; Shen, Zhufang; Liu, Zhanzhu; Bioorganic and Medicinal Chemistry Letters; vol. 28; 18; (2018); p. 3050 – 3056;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 2058-72-2, The chemical industry reduces the impact on the environment during synthesis 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, I believe this compound will play a more active role in future production and life.

General procedure: The reactions are conducted in a custom made, twelve membered carousal containing glass reaction chambered of 20 ml volume. To the stirred solution of 6-methylfuro[3,4-c]pyridine-3,4(1H,5H)-dione(200 mg, mmole) (1 equivalence) in ethanol (10 ml) , piperidine/pyrrolidine(1 equivalence) was added. To the stirring solution appropriateisatins (1.1 equivalence) were added under nitrogen atmosphere and the resulting reaction mixture was refluxed at 80 C for 14 h (within which substantial amount of product precipitates from the reaction mixture). Then reaction mixture was cooled to room temperature and solvent was syringed off and the solid was washed with ethanol(2×5 ml) and dried in a Genevac to give desired product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromo-1-methylindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Luthra, Tania; Naga Lalitha; Uma; Sen, Subhabrata; Bioorganic and Medicinal Chemistry; vol. 26; 18; (2018); p. 4996 – 5005;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 4702-13-0, name is N-Phthaloylglycine, molecular formula is C10H7NO4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: indolines-derivatives

To a solution of N-phthaloylglycine (36.3 mg, 0.177 mmol) in CH2Cl2 (1.8 mL) were added(COCl)2 (46 L, 0.532 mmol) and DMF (1 drop) at 0 C. The reaction mixture was stirred at0 C for 10 min and at room temperature for 2 h. The solvents were removed under reduced pressure. Azeotropic distillations were carried out with toluene (2 × 2 mL) under reducedpressure. The residue (acid chloride) was used for next step without further purification.To a solution of compound 5 (25.0 mg, 0.0592 mmol) and pyridine (43 L, 0.532 mmol) inCH2Cl2 (0.3 mL) was added a solution of the above crude product (acid chloride) in CH2Cl2 (0.6mL) at 0 C. The reaction mixture was stirred at 0 C for 30 min and at room temperature for 9 h.After cooling to 0 C, the reaction mixture was quenched by addition of saturated NaHCO3 aq.(5 mL). The whole mixture was extracted with CH2Cl2 (2 10 mL), and the combined organiclayers were dried with Na2SO4. After filtration and evaporation, the crude was purified by silicagel chromatography (n-hexane/EtOAc 1:1 to 1:2) to give compound 14 as a pale yellow oil (34.0mg, 94%)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4702-13-0, its application will become more common.

Reference:
Article; Natori, Yoshihiro; Hwang, Candy S.; Lin, Lucy; Smith, Lauren C.; Zhou, Bin; Janda, Kim D.; Beilstein Journal of Organic Chemistry; vol. 15; (2019); p. 1020 – 1031;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 6941-75-9, These common heterocyclic compound, 6941-75-9, name is 5-Bromoisoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of Zn powder (1.73 g, 26.154 mmol), copper (II) sulfate pentahydrate (0.02 g, 0.08 mmol) and 2M aq NaOH (27 mL) were cooled to 0 C. 5-Bromoisoindoline-1,3-dione (5 g, 22 mmol) was added at the same temperature over the period of 30 min. The reaction mixture was stirred at 0 C. for 30 min and 3 h at RT. The reaction mixture was filtered and the filtrate was neutralized with concentrated HCl. The reaction mixture was diluted with ethanol and extracted with ethyl acetate. The combined ethyl acetate layer was dried over Na2SO4 and concentrated under reduced pressure to afford the crude title compound as a brown solid, which was used in the next step without further purification (1.3 g): mp 258-261 C.; 1H NMR (400 MHz, DMSO-d6) delta 9.03 (br, 1H), 7.81 (m, 2H), 7.69 (m, 1H), 6.44 (m, 1H), 5.88 (d, J=9.3 Hz, 1H); ESIMS m/z 225.83 ([M-H]-); IR (thin film) 1684, 3246, 606 cm-1.

The synthetic route of 6941-75-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171312; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 193354-13-1, name is 5-Iodoindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 193354-13-1

EXAMPLE 20 3-[5-(5-Iodo-2-oxo-1,2-dihydroindol-3-ylidenemethyl)-2,4-dimethyl-1H-pyrrol-3-yl]-propionic acid 3-(2-Carboxyethyl)-2,4-dimethyl-5-formylpyrrole (97.5 mg), 130 mg 5-iodo-2-oxindole, and 75 muL of piperidine in 3 mL of ethanol were stirred at 95 C. for 5 hours. The reaction mixture was cooled and concentrated. The residue was suspended in 6 N aqueous hydrochloric acid. The precipitate was filtered, washed with water to pH 6 and dried in a vacuum oven overnight to give 155 mg of the title compound (71%) as an orange solid. 1H-NMR (360 MHz, DMSO-d6) delta 13.41 (s, br, 1H, NH-1′), 12.03 (s, br, 1H, COOH), 10.79 (s, br, 1H, NH-1), 8.12 (d, J=1.70 Hz, 1H, H-4), 7.65 (s, 1H, H-vinyl), 7.36 (dd, J=1.70, 7.93 Hz, 1H, H-6), 6.79 (d, J=7.93 Hz, 1H, H-7), 2.64 (t, J=7.76 Hz, 2H, CH2CH2COOH), 2.34 (t, J=7.76 Hz, 2H, CH2CH2COOH), 2.29 (s, 3H, CH3), 2.27 (s, 3H, CH3). MS m/z (relative intensity, %) 437 ([M+1]+, 100).

The synthetic route of 5-Iodoindolin-2-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sugen, Inc.; US6395734; (2002); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, A new synthetic method of this compound is introduced below., category: indolines-derivatives

General procedure: A mixture of indoline-2,3-dione 1 (1mmol), l-tryptophan (2a) or l-histidine 2b (1mmol) and (E)-(2-nitrovinyl)benzene 3 (1.1mmol) was heated while stirred in [bmim]Br as the reaction medium (3mL) for 1hat 100C. After completion of the reaction (TLC), EtOAc (5mL) was added and the reaction mixture was stirred for 10min. This treatment was repeated and the combined ethyl acetate layers were removed in vacuo. The crude product was purified by recrystallization of the residue from EtOH (compounds 4) or by column chromatography (compounds 5). After extraction of the product, the ionic liquid was dried under vacuum at 80C for 2h to eliminate any water and could be reused for subsequent runs of the reaction.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Arumugam, Natarajan; Almansour, Abdulrahman I.; Kumar, Raju Suresh; Periasamy, Vaiyapuri Subbarayan; Athinarayanan, Jegan; Alshatwi, Ali A.; Govindasami, Periyasami; Altaf, Mohammad; Menendez, J. Carlos; Tetrahedron; vol. 74; 38; (2018); p. 5358 – 5366;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 1055412-47-9, The chemical industry reduces the impact on the environment during synthesis 1055412-47-9, name is su-5614, I believe this compound will play a more active role in future production and life.

A suspension of 5-chloro-3-(1H-pyrrol-2-yl-methylene)-1,3-dihydro-indol-2-one (260 mg, 0.96 mmol), piperidine (95 muL, 0.96 mmol) and paraformaldehyde (43 mg, 1.44 mmol) in 5 mL of dioxane and 5 mL of EtOH was heated to 80 C. for 15 h. The resulting solution was cooled to room temperature followed by cooling to -20 C. for 1 h. The solid which formed was collected by filtration and rinsed with EtOH (previously cooled to -20 C.). The solid collected was dried under vacuum to give the title compound (180 mg, 51%) as a yellow-orange solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, su-5614, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Allergan, Inc.; US6699863; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 181140-34-1, name is (R)-(-)-N-(2,3-Epoxypropyl)phthalimide, molecular formula is C11H9NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: (R)-(-)-N-(2,3-Epoxypropyl)phthalimide

General procedure: Compounds 2-5 were synthesized using a modified procedure originally reported by Roehrig et al.28 To a cooled solution of (R)-(-)-N-(2,3-epoxypropyl)phthalimide 1 (102 mg, 0.50 mmol) in 10 mL of 2-propanol, amine or aminoalcohol (0.6 mmol, 1.2 equiv) in 10 mL of 2-propanol was added at 0 C and stirred for 1 h. It was then refluxed for 8 h. After the completion of the reaction, the solvent was removed under reduced pressure and the crude product was purified by flash chromatography on silica gel (CHCl3/MeOH 1:20 as eluent) to afford 2-5 as white crystals.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 181140-34-1, its application will become more common.

Reference:
Article; Bozkurt, Selahattin; Durmaz, Mustafa; Naziroglu, Hayriye Nevin; Yilmaz, Mustafa; Sirit, Abdulkadir; Tetrahedron Asymmetry; vol. 22; 5; (2011); p. 541 – 549;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 99365-40-9,Some common heterocyclic compound, 99365-40-9, name is 6-Bromoindolin-2-one, molecular formula is C8H6BrNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2.4 g of 6-bromo-2-indolinone are placed in 60 ml of dimethoxyethane, 1.9 g of phenylboric acid in 8 ml of ethanol and 0.3 g of tetrakistriphenylphosphine palladium are added and to this mixture 12 ml of 2N sodium carbonate solution are added dropwise at ambient temperature.. The mixture is stirred for 6 hours at 85 C. After cooling the catalyst is filtered off, the solvent is eliminated and the residue is washed with 100 ml of water and 20 ml of 1N sodium hydroxide solution.. The residue is purified through a silica gel column with petroleum ether/ethyl acetate (8:2) as eluant. Yield: 1.5 g (65% of theory), Rf value: 0.45 (silica gel, petroleum ether/ethyl acetate=1:1) Melting point: 167-170 C.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6-Bromoindolin-2-one, its application will become more common.

Reference:
Patent; Boehringer Ingelheim Pharma GmbH & Co. KG; US6794395; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem