Tag: M.W=200-300

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 868066-91-5, name is 5-Bromo-2-methylisoindolin-1-one, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 5-Bromo-2-methylisoindolin-1-one

Synthesis of 5-bromo-2,3-dimethylisoindolin-1-one (2) To a solution of 5-bromo-2-methylisoindolin-1-one (1, 1 g, 4.42 mmol) in tetrahydrofuran (20 mL) at -78° C., sodium hexamethyldisilazane (4.4 mL, 4.86 mmol 1M solution in tetrahydrofuran) was added and the reaction mixture was allowed to stir at the same temperature for 15 min. Methyl iodide (0.55 mL, 8.85 mmol) was added and the reaction mixture was stirred at -78° C. for 2 h. The reaction mixture was quenched with water and extracted with ethyl acetate. The organic layer was washed with brine, separated, dried over sodium sulphate and concentrated under reduced pressure. The residue was purified by silica gel column chromatography using 30percent ethyl acetate in hexanes as eluent to afford 5-bromo-2,3-dimethylisoindolin-1-one (2). Yield: 0.1 g, 9percent; MS (ESI) m/z 240 [M+1]+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 868066-91-5.

Reference:
Patent; eFFECTOR Therapeutics, Inc.; Sprengeler, Paul A.; Reich, Siegfried H.; Ernst, Justin T.; Webber, Stephen E.; Shaghafi, Mike; Murphy, Douglas; Tran, Chinh; (131 pag.)US10112955; (2018); B2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 2-(3-Hydroxypropyl)isoindoline-1,3-dione

(i) Preparation of trans and cis 2-(3,4,5-trimethoxyphenyl)-5-(3-phthalimidyl propoxy) tetrahydrofuran (compounds 107, 108) Compound 105 (1.14 g, 4.49 mmol) was dissolved in 4 mL dichloromethane. Triethylamine (681.4 mg, 6.73 mmol) was added to this solution. The reaction mixture was cooled with an ice bath and trifluoroacetic anhydride (1.41 g, 6.73 mmol) was added in a dropwise manner. The reaction mixture was stirred at 0 C. for 30 minutes and then 3-phthalimidylpropanol (106) (2.4 g, 13.26 mmol) was added. The reaction mixture was warmed to room temperature and stirred at room temperature for 2 hours. The reaction was quenched with saturated aqueous NaHCO3 solution and extracted with ethyl acetate. The organic layer was washed with water and saturated NaCl solution, dried over MgSO4, filtered and evaporated in vacuo to an oil which was purified by column chromatography (silica, 2:1 hexane/ethyl acetate) (107: 522 mg (trans); 108: 271 mg (cis); 1:1 mixture of 107 and 108: 110 mg; total yield 46%). 1 H NMR (CDCl3): 107: 1.70 (m,1H); 1.82 (m,1H); 2.00(m,2H); 2.02(m,1H); 2.28(m,1H); 3.46(m,1H); 3.83(s,3H); 3.84(m,3H); 3.88(s,6H); 4.99(t,1H); 5.30(dd,1H); 6.56(s,2H); 7.72(m,2H); 7.85(m,2H). 108: 1.95(m,3H); 2.00(m,2H); 2.20(m,1H); 3.51(m,1H); 3.83(s,3H); 3.85(m,2H); 3.88(s,6H); 3.92(m,1H); 4.90(m,1H); 5.16(dd,1H); 6.60(s,2H); 7.72(m,2H); 7.84(m,2H).

The synthetic route of 2-(3-Hydroxypropyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Cytomed, Inc.; US5681966; (1997); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, A new synthetic method of this compound is introduced below., name: 5-(Trifluoromethoxy)indoline-2,3-dione

General procedure: A mixture of indoline-2,3-dione 1 (1mmol), l-tryptophan (2a) or l-histidine 2b (1mmol) and (E)-(2-nitrovinyl)benzene 3 (1.1mmol) was heated while stirred in [bmim]Br as the reaction medium (3mL) for 1hat 100C. After completion of the reaction (TLC), EtOAc (5mL) was added and the reaction mixture was stirred for 10min. This treatment was repeated and the combined ethyl acetate layers were removed in vacuo. The crude product was purified by recrystallization of the residue from EtOH (compounds 4) or by column chromatography (compounds 5). After extraction of the product, the ionic liquid was dried under vacuum at 80C for 2h to eliminate any water and could be reused for subsequent runs of the reaction.

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Arumugam, Natarajan; Almansour, Abdulrahman I.; Kumar, Raju Suresh; Periasamy, Vaiyapuri Subbarayan; Athinarayanan, Jegan; Alshatwi, Ali A.; Govindasami, Periyasami; Altaf, Mohammad; Menendez, J. Carlos; Tetrahedron; vol. 74; 38; (2018); p. 5358 – 5366;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 337536-15-9, These common heterocyclic compound, 337536-15-9, name is 4-Bromoisoindolin-1-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The compound II obtained in Example 3 was dissolved in 2 L of THF. Cool down to 0 C, Sodium borohydride 2.5 eq was added in four batches. After the stirring is stable, Add boron trifluoride etherate 2.0 eq, The temperature was further raised to 70 C and refluxed for 8 hours. TLC tracking. Cool down to 0 C, The reaction was quenched by dropwise addition of methanol. Then add 6M hydrochloric acid, Adjust the pH to 3-4, The temperature was further raised to 70 C and refluxed for 8 hours. Cool to room temperature, filter, Mother liquor is concentrated, Get the product hydrochloride.

Statistics shows that 4-Bromoisoindolin-1-one is playing an increasingly important role. we look forward to future research findings about 337536-15-9.

Reference:
Patent; Nanjing Xiaozhuang College; Shanghai Weifenqi Pharmaceutical Technology Co., Ltd.; Zhu Yuan; Wu Longzhong; Li Jianxiang; Yuan Yanfen; (11 pag.)CN109678787; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 129487-92-9, name is tert-Butyl 5-aminoindoline-1-carboxylate, A new synthetic method of this compound is introduced below., COA of Formula: C13H18N2O2

Part H. To tert-butyl-5-amino-1-indolinecarboxylate (1.90 g, 8.2 mmol) was added 5-bromovaleryl chloride (1.4 mL, 9.0 mmol) and 18 mL of THF. After stirring for 5 min at rt under N2, potassium tert-butoxide (9 mL, 9 mmol; 1.0 M in THF) was added in one portion, and the resulting brown solution was stirred under N2 for 30 min. A second portion of potassium tert-butoxide (9 mL) was added, and the resulting brown suspension was stirred for 15 min. An additional 0.10 mL-portion of 5-bromovaleryl chloride and a 4.5 mL-portion of potassium tert-butoxide were added, and the mixture was stirred for 30 min. The reaction was then poured into H2O (80 mL). The aqueous layer was washed with EtOAc (3*50 mL), and the combined organic layers were washed with brine, dried over Na2SO4, and filtered. The filtrate was concentrated and the resulting residue was purified by radial chromatography (50% EtOAc in hexanes) to afford tert-butyl 5-(2-oxo-1-piperidinyl)-1-indolinecarboxylate as a pink solid (1.30 g, 50%). LRMS (AP+): 317.2 (M+H)+. 1H NMR (CDCl3) delta 7.40-7.80 (br m, 1H), 7.01 (s, 1H), 6.97 (d, 1H), 3.94 (t, 2H), 3.55 (br m, 2H), 3.09 (t, 2H), 2.49 (br m, 2H), 1.91 (br m, 4H), 1.52 (s, 9H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Bristol-Myers Squibb Company; Pinto, Donald J.P.; Quan, Mimi L.; Orwat, Michael J.; Li, Yun-Long; Han, Wei; Qiao, Jennifer X.; Lam, Patrick Y.S.; Koch, Stephanie L.; (132 pag.)US2017/50964; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5332-26-3, category: indolines-derivatives

Example 1 Diphenyl(phthalimidomethyl)phosphine oxide IV Toluene (25 ml) was added to a mixture of ethyl diphenylphosphinite (5 g, 21.71 mmole) and the N-(bromomethy)phthalimide III (5.21 g, 21.70 mmole) at room temperature. The reaction mixture was heated to 90 C. and maintained at this temperature for 48 h when the reaction was complete as indicated from the TLC of the reaction mixture. The reaction mixture was concentrated under reduced pressure, triturated with toluene and filtered to furnish the phosphine oxide compound IV as a solid; yield: 6 g, 76.5%.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; HELVETICA INDUSTRIES (P) LIMITED; US2011/263870; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 5181-35-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 5181-35-1, name is 2-(2-Bromoethoxy)isoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows.

Compound VII: Weigh 2.3g o-nitrobenzyl mercaptan (14.2mmol) And 5.73g of N-(2-bromoethoxy)phthalimide (21.3mmOl) in a round bottom flask, Dissolved with 25ml dimethyl sulfoxide, To the reaction solution was added 3ml of triethylamine (21.3mmol), and reacted at room temperature for 4h; TLC monitoring showed that o-nitrobenzyl mercaptan was completely consumed. To the reaction mixture, an appropriate amount of water was added and the mixture was extracted with dichloromethane for 2-3 times. The organic phase was collected, dried over anhydrous sodium sulfate, Separation by column chromatography (RhoEpsilon:EpsilonAlpha = 5:1), 3.74 g of compound VII (N- (2 – ((2-nitrobenzyl) mercapto) ethoxy) phthalimide was obtained as a white solid (73.2% yield). As shown in FIG. 4, FIG. 4 is a nuclear magnetic hydrogen spectrum of the compound YPi11 prepared in this example.

The chemical industry reduces the impact on the environment during synthesis 2-(2-Bromoethoxy)isoindoline-1,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Patent; University of Science and Technology of China; Huang Jianfeng; Shi Jing; Chu Guochao; (21 pag.)CN107698474; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 954-81-4, name is N-(5-Bromopentyl)phthalimide, A new synthetic method of this compound is introduced below., name: N-(5-Bromopentyl)phthalimide

To a stirred solution of compound 14-k (80 g, 0.27 mol) in DMF (745 mL) was added potassium thioacetate (34 g, 0.29 mol) portion wise over 20 mm at room temperature. After complete addition, the reaction mixture was stirred at room temperature for 30 mm. Reaction progress was monitored by TLC; after completion the reaction mixture was quenched with ice-cold water (1 L) and stirred for 1 h. The resultant precipitate was filtered, washed with water (500 mL) and dried in vacuo to afford 15-k as an off-white solid (75 g, 95%). ?H NMR (400 MHz, CDC13): 7.84 (dd, J= 5.5 Hz, 3.0 Hz, 2H), 7.71 (dd, J 5.5 Hz, 3.1 Hz, 2H), 3.67 (t, J 7.3 Hz, 2H), 2.85 (t, J 7.3 Hz, 2H), 2.30 (s, 3H), 1.73-1.65 (m, 3H), 1.64-1.57 (m, 1H), 1.46-1.37 (m, 2H);LC-MS: 292.2 (M+1).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; CV6 THERAPEUTICS (NI) LIMITED; SPYVEE, Mark; LEWIS, Michael; (300 pag.)WO2018/98204; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 15362-40-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15362-40-0, name is 1-(2,6-Dichlorophenyl)-2-indolinone belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

The material 2,6-dichlorodiphenylamine (IV) (15mmol, 3.572g) was dissolved in 50ml toluene solvent and added to a three-necked flask, chloroacetyl chloride (16.5mmol, 1.8637g) was added dropwise, heated to 120 , Stir the reaction for 3h,TLC detected that the reaction of 2,6-dichlorodiphenylamine (IV) was completed and cooled to room temperature. [Et3NH]Cl-AlCl3 (30mmol, 8.129g) was slowly added dropwise to the reaction solution, stirred at room temperature for 30min, the oil bath was heated to 60C, and the reaction was stirred for 4h.TLC monitoring until the N-phenyl-N-(2,6-dichlorophenyl)chloroacetamide (III) intermediate disappeared, the reaction solution was slowly poured into a separatory funnel, allowed to stand for separation, and the ions were separated The liquid is recovered and applied. The application effect is shown in Table 1. The organic layer is added dropwise with 10% NaOH (30mmol, 1.2g) and heated to reflux for 2h.TLC monitors the completion of the reaction of 1-(2,6-dichlorophenyl)-2-indoline (II) intermediate, separates and removes the organic layer, evaporates part of the water from the water layer under reduced pressure, cools and crystallizes, Recrystallized with water,4.035g of white solid was obtained with a yield of 84.56%,The HPLC content is 99.85%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-(2,6-Dichlorophenyl)-2-indolinone, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Zhejiang University of Technology; Luo Shuping; Xu Dandan; Ren Chenchao; Wang Tianqi; (6 pag.)CN111116391; (2020); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 3335-98-6, name is 1-Phenyloxindole, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3335-98-6, Computed Properties of C14H11NO

General procedure: To a Schlenk tube were added oxindole 1 (0.3 mmol), t-BuONO (0.6 mmol), andTHF (2 mL). Then the tube was stirred at 50 C under 1 atm of O2 for the indicatedtime until complete consumption of starting material monitored by TLC analysis.After the reaction was finished, the reaction mixture was washed with brine. The aqueous phase was re-extracted with ethyl acetate. The combined organic extractswere dried over Na2SO4, removal of the solvent under vacuum afforded the crudeproduct, which was purified further by column chromatography using hexane-ethylacetate.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Phenyloxindole, and friends who are interested can also refer to it.

Reference:
Article; Wei, Wen-Ting; Ying, Wei-Wei; Zhu, Wen-Ming; Wu, Yi; Huang, Yi-Ling; Cao, Yi-Qi; Wang, Yi-Ning; Liang, Hongze; Synlett; vol. 28; 17; (2017); p. 2307 – 2310;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem