Tag: M.W=200-300

Adding a certain compound to certain chemical reactions, such as: 954-81-4, name is N-(5-Bromopentyl)phthalimide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 954-81-4, Application In Synthesis of N-(5-Bromopentyl)phthalimide

General procedure: To a suspension of compound 9-12 and potassium carbonate in ACN, was added dropwise N-methylbenzylamine or piperidine under stirring and the reaction mixture was refluxed for 24 h. The reaction mixture was cooled and filtered. After evaporation of the filtrate, purification by column chromatography on silica gel (cyclohexane/EtOAc/TEA) yielded compounds 16 and 17.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, N-(5-Bromopentyl)phthalimide, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Ghedira, Donia; Voissiere, Aurelien; Peyrode, Caroline; Kraiem, Jamil; Gerard, Yvain; Maubert, Elise; Vivier, Magali; Miot-Noirault, Elisabeth; Chezal, Jean-Michel; Farhat, Farhat; Weber, Valerie; European Journal of Medicinal Chemistry; vol. 158; (2018); p. 51 – 67;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 954-81-4,Some common heterocyclic compound, 954-81-4, name is N-(5-Bromopentyl)phthalimide, molecular formula is C13H14BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a suspension of compound 9 (12.0 g, 40.5 mmol) and potassium carbonate (14.0 g, 101 mmol) in THF (150 mL) was added dropwise an excess of a dimethylamine aqueous solution (26% wt) (39 mL, 202.5 mmol) and the reaction mixture was refluxed for 24 h. After cooling, the solution was filtered and the precipitate was washed with THF (200 mL). After concentration under reduced pressure, the filtrate afforded a biphasic residue that was decanted. The oily layer was separated to yield a first fraction of compound 13a. The remaining aqueous layer was extracted with EtOAc (2 × 75 mL), the organic extracts were combined, dried over MgSO4, filtered and evaporated under vacuum to afford a supplementary fraction of compound 13a. The two fractions (6.95 g, 34.0 mmol) were combined and engaged directly in the next step without further purification. Yield 84%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route N-(5-Bromopentyl)phthalimide, its application will become more common.

Reference:
Article; Ghedira, Donia; Voissiere, Aurelien; Peyrode, Caroline; Kraiem, Jamil; Gerard, Yvain; Maubert, Elise; Vivier, Magali; Miot-Noirault, Elisabeth; Chezal, Jean-Michel; Farhat, Farhat; Weber, Valerie; European Journal of Medicinal Chemistry; vol. 158; (2018); p. 51 – 67;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 954-81-4, These common heterocyclic compound, 954-81-4, name is N-(5-Bromopentyl)phthalimide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of compound 14-k (80 g, 0.27 mol) in DMF (745 mL) was added potassium thioacetate (34 g, 0.29 mol) portion wise over 20 min at room temperature. After complete addition, the reaction mixture was stirred at room temperature for 30 min. Reaction progress was monitored by TLC; after completion the reaction mixture was quenched with ice-cold water (1 L) and stirred for 1 h. The resultant precipitate was filtered, washed with water (500 mL) and dried in vacuo to afford 15-k as an off-white solid (75 g, 95%). (1333) 1H NMR (400 MHz, CDC13): delta 7.84 (dd, J= 5.5 Hz, 3.0 Hz, 2H), 7.71 (dd, J= 5.5 Hz, 3.1 Hz, 2H), 3.67 (t, J= 7.3 Hz, 2H), 2.85 (t, J= 7.3 Hz, 2H), 2.30 (s, 3H), 1.73-1.65 (m, 3H), 1.64-1.57 (m, 1H), 1.46-1.37 (m, 2H);LC-MS: 292.2 (M++l).

The synthetic route of 954-81-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CV6 THERAPEUTICS (NI) LIMITED; SPYVEE, Mark; (500 pag.)WO2018/98206; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 41663-84-7, name is 2-Methyl-5-nitroisoindoline-1,3-dione, molecular formula is C9H6N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C9H6N2O4

Example 4. To a reaction vessel were added 4-nitro-N-methylphthalimide (0.51g, 0. 00248 mol), sodium hydrogen sulfide (0.07g, 0.00125 mol), biphenyl (0.204g, 0.00132 mol), triethylamine (0.2 ml, 0.0014 mol), tetrabutylphosphonium bromide (0.15g, 0.00044 mol) and dry toluene (40 ml). The reaction mixture was allowed to proceed at reflux (approximately 145C) for 18 hours. The reaction mixture was sampled and tested by HPLC which indicated a yield of 4,4′-bis(N-methylphthalimide)sulfide of 10% (0.04g).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 41663-84-7, its application will become more common.

Reference:
Patent; GENERAL ELECTRIC COMPANY; EP172298; (1991); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 5332-26-3, These common heterocyclic compound, 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1. Dimethyl (phthalimidomethyl)phosphonate (ii). A mixture of N-(bromomethyl) phthalimide (i) (10.43 g, 43.46 mmol) and trimethyl phosphite (5.93 g, 47.80 mmol) was heated at reflux in xylene (20 mL) for 6 h. The reaction mixture was then cooled to room temperature and concentrated. Crystallization from CHCl3-hexane gave (ii) (7.60 g, 65%) as a white solid: 1H NMR (300 MHz, CDCl3) deltaH 3.84 (d, JH,P=10.8 Hz, 6 H), 4.12 (d, J=11.4 Hz, 2 H), 7.76 (m, 2 H), 7.87 (m, 2 H).

The synthetic route of 5332-26-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Besterman, Jeffrey M.; Rahil, Jubrail; Vaisburg, Arkadii; US2004/29836; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 20780-72-7, name is 4-Bromoisatin, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 4-Bromoisatin

To 4-bromoindoline-2,3-dione (8.94 g, 39.6 mmol) was added 1.0 M sodium hydroxide (40 mL, 120 mmol) to give a dark brown mixture. The mixture was heated to 80 °C then 20percent hydrogen peroxide (9 mL, 88 mmol) was added slowly over 15 min (caution: a strong exotherm was observed upon reagent addition). The mixture was then stirred at 80 °C for lh. After this time, the mixture was cooled in an ice bath to ~10 °C and then concentrated to a residue. HC1 was added cautiously to the residue until the pH of the mixture was 4-5. Once at the prescribed pH, the mixture was then concentrated to dryness and MeOH (150 ml) was added. The resulting suspension stirred for 15 min and then filtered. The filtrate wasconcentrated to dryness and dried under vacuum for 14 h to yield 2-amino-6- bromobenzoic acid (9.18 g) as a brown solid. 3/4 NMR (400 MHz, DMSO-d6) delta ppm 6.72 (1 H, t, J=7.91 Hz), 6.60 (1 H, dd, J=7.78, 1.00 Hz), 6.52 (1 H, dd, J=7.91, 1.13 Hz). LCMS Method D: retention time 0.68 min, [M+l] 200.0.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 20780-72-7, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; JOHNSON, James A.; LLOYD, John; FINLAY, Heather; JIANG, Ji; NEELS, James; DHONDI, Naveen Kumar; GUNAGA, Prashantha; BANERJEE, Abhisek; ADISECHAN, Ashokkumar; WO2011/28741; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 2058-72-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: GN/SO3H (80 mg) was added to the 3 mL of EtOH/water (1:1) and dispersed for 30 min. Then, malononitrile (1 mmol), isatin (1 mmol), and dimedone (1 mmol) were added to the mixture and the mixture was heated to reflux and kept at this temperature for an appropriate time. After the time of reaction was completed, water was separated by centrifuging followed by extracting the crude product by ethyl acetate. The solvent was dried using Na2SO4 and removed from the reaction by evaporation with a rotary evaporator. Finally, the crude product was recrystallized in hot ethanol to achieve the pure product. The GN/SO3H nanocomposite was washed and reused several times.

The chemical industry reduces the impact on the environment during synthesis 5-Bromo-1-methylindoline-2,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri; Research on Chemical Intermediates; vol. 44; 11; (2018); p. 6979 – 6993;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 99365-40-9, name is 6-Bromoindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 99365-40-9, Recommanded Product: 6-Bromoindolin-2-one

General procedure: To the phenstatin-3-aldehyde/isocombretastatin-3-aldehyde(16a-b) (0.303 mmol/0.304 mmol) prepared in the above stepwas added corresponding substituted oxindoles (17a-h)(0.303 mmol) and catalytic amount of piperidine (1.0 ml) in ethanol.Heated the reaction mixture to reflux for 4 h at 85 C. The solidcompounds obtained in the reaction vessel were filtered and washed with ethanol for 4-5 times. After complete air drying thefinal compounds phenstatin/isocombretastatin-oxindole analogs(5a-h and 6a-h) were obtained as pure solids (yield 71-90%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Kumar, G. Bharath; Nayak, V. Lakshma; Sayeed, Ibrahim Bin; Reddy, Vangala Santhosh; Shaik, Anver Basha; Mahesh, Rasala; Baig, Mirza Feroz; Shareef, Mohd Adil; Ravikumar; Kamal, Ahmed; Bioorganic and Medicinal Chemistry; vol. 24; 8; (2016); p. 1729 – 1740;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 20870-78-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20870-78-4, name is 5-Bromoindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 5-Bromo-1,3-dihydro-indol-2-one (10 g, 47.1 mmol) in dioxane (120 ml) was added bispinacolato diborane (26.25 gm, 103.7 mmol); the reaction was purged with nitrogen for 30 min followed by addition of potassium acetate (13.86 g, 141 mmol) and Pd(dppf)Cl2 (1.92 g 2.3 mmol). The reaction mixture was warmed to 100 C. and stirred at this temperature for 16 h. After the completion of the reaction it was filtered through Celite and the filtrate was diluted with water, extracted with EtOAc. The combine organic layer ware washed with brine, dried over Na2SO4, concentrated and purified by column chromatography to obtain 5-(4,4,5,5-Tetramethyl-[1,3,2]dioxaborolan-2-yl)-1,3-dihydro-indol-2-one, (7.8 g, 64%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromoindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Alam, Muzaffar; Du Bois, Daisy Joe; Hawley, Ronald Charles; Kennedy-Smith, Joshua; Minatti, Ana Elena; Palmer, Wylie Solang; Silva, Tania; Wilhelm, Robert Stephen; US2011/71150; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20870-78-4, name is 5-Bromoindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., name: 5-Bromoindolin-2-one

EXAMPLE 58A 5-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)indolin-2-one Under N2, 5-Bromoindolin-2-one (Aldrich, 2.11 g, 10.0 mmol) was coupled with bis(pinacolato)dibon (Frontier Scientific, 3.05 g, 12 mmol) in the presence of KOAc (Aldrich, 1.50 g, 15.0 mmol) under the catalysis of PdCl2(dppf).CH2Cl2 (Aldrich, 163 mg, 0.2 mmol) in anhydrous dioxane (Aldrich, 50 mL) at 85 C. for 15 hours. After the reaction was completed, it was cooled down to ambient temperature and diluted with EtOAc (100 mL). The mixture was then washed with brine (2*10 mL) and concentrated. The residue was purified with chromatography on silica gel (EtOAc/hexanes, v. 1:1, Rf=0.5) to provide the title compound (2.43 g, yield, 93.8%). 1H NMR (300 MHz, CD3OD) delta 1.24 (s, 12H), 3.51 (s, 2H), 6.88 (d, J=8.5 Hz, 1H), 7.52-7.75 (m, 2H) ppm. MS (DCI/NH3): m/z 260 (M+H)+.

According to the analysis of related databases, 20870-78-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Ji, Jianguo; Li, Tao; Lynch, Christopher L.; Gopalakrishnan, Murali; US2008/45539; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem