Tag: M.W=200-300

Application of 5181-35-1,Some common heterocyclic compound, 5181-35-1, name is 2-(2-Bromoethoxy)isoindoline-1,3-dione, molecular formula is C10H8BrNO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 2-(2-bromoetho xy)isoindo line- 1,3- dione (20 g, 74 mmol, prepared according to the procedure described in step 1 of preparation 10) and 2H-tetrazole-5-carboxylic acid ethyl ester (10.51 g, 74 mmol) in dimethylformamide (100 ml) was added cesium carbonate (24.13 g, 74 mmol) lot wise under stirring at room temperature. After 16 hours, the reaction mixture was filtered through filter paper and filtrate was slowly poured into chilled water (700 ml) under stirring. After 30 minutes of stirring, the product was extracted with ethyl acetate (200 ml and 100 ml). The combined organic layers were washed with brine (100 ml). The organic extract was dried over anhydrous sodium sulfate and concentrated in vacuo to yield 12.5 g of the titled compound. The compound was purified by column chromatography using mixture of acetone and hexane as an eluent. The fractions containing the compound were collected and concentrated to provide 10 g of mixture of ethyl l-{2-[(l,3-dioxo- l,3-dihydro-2H-isoindol-2- yl)oxy]ethyl}- lH-tetrazole-5-carboxylate and ethyl 2-{2-[(l,3-dioxo- l,3-dihydro-2H-isoindol-2- yl)oxy]ethyl}-2H-tetrazole-5-carboxylate in 53% yield Analysis: Mass: 332(M+1); for Molecular weight: 331 and for Molecular formula: C14H13N5O5 ; To a solution of ethyl l-{2-[(l,3-dioxo- l,3-dihydro-2H-isoindol-2-yl)oxy]ethyl}- lH-tetrazole-5-carboxylate and ethyl 2-{2-[(l,3-dioxo- l,3-dihydro-2H-isoindol-2-yl)oxy]ethyl}-2H-tetrazole-5-carboxylate (10 g, 3.02 mmol, product from step 1) in dichloromethane (100 ml) was added hydrazine hydrate (2.26 ml, 4.53 mmol) at 25- 30 C under stirring. The stirring was continued for 2 hours and the progress of reaction was monitored by thin layer chromatography using mixture of chloroform and methanol (9: 1) as solvent. After complete conversion of starting material, the unwanted solid was filtered out and washed with dichloromethane (20 ml). The filtrate was concentrated at 40 C under high vacuum to obtain 6.0 g of mixture of ethyl l-[2-(aminooxy)ethyl]- lH-tetrazole-5-carboxylate and ethyl 2- [2-(aminooxy)ethyl]-2H-tetrazole-5-carboxylate (about 100% yield), the resulted compound was used in the next step without further purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(2-Bromoethoxy)isoindoline-1,3-dione, its application will become more common.

Reference:
Patent; WOCKHARDT LIMITED; TADIPARTHI, Ravikumar; PATIL, Vijaykumar Jagdishwar; DEKHANE, Deepak; SHAIKH, Mohammad Usman; BIRAJDAR, Satish; DOND, Bharat; PATEL, Mahesh Vithalbhai; (100 pag.)WO2017/81615; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 6941-75-9,Some common heterocyclic compound, 6941-75-9, name is 5-Bromoisoindoline-1,3-dione, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 46 (S)-3,5-dichloro-4-(2-(3-(cyclopropylmethoxy)-4-(difluoromethoxy)- phenyl)-2-(2-(5-(methylsulfonamidomethyl)-1 ,3-dioxoisoindolin-2- yl)acetoxy)ethyl)pyridine 1 -oxide (Compound 254): Scheme 46 Step 1 : Preparation of 1 ,3-dioxoisoindoline-5-carbonitrile (249): A mixture of 5-bromoisoindoline-1 ,3-dione (2.5 g, 1 1 .06 mmol) and Pd(Ph3P)4 (1 .406 g, 1 .217 mmol) in DMF (50 ml) was accurately degassed with nitrogen, then Zn(CN)2 (1 .299 g, 1 1 .06 mmol) was added and the solution, splitted in 5 vials, was heated under microwave irradiation at 200C for 1 hour. A 3% aqueous solution of NH4OH (200 ml) was added and the organic phase was extracted with ethyl acetate (3×150 ml). The combined organic layers were washed with brine (150 ml), dried over sodium sulfate and concentrated to dryness. The crude was purified by silica gel flash chromatography (100% DCM to DCM: MeOH = 99: 1 ) to afford 1 ,3-dioxoisoindoline-5-carbonitrile as (0.522 g, 3.03 mmol, 27.4% yield, MS/ESI+ 172.9 [MH] +).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromoisoindoline-1,3-dione, its application will become more common.

Reference:
Patent; CHIESI FARMACEUTICI S.P.A.; ARMANI, Elisabetta; AMARI, Gabriele; CAPALDI, Carmelida; CARZANIGA, Laura; LA PORTA, Elena; GUALA, Matilde; WO2013/57013; (2013); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 1029691-06-2, name is 2-(3-Oxocyclopentyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 1029691-06-2

[0604] To a mixture of DIPEA (5.32 g, 41.17 mmol) and 151 (5.9 g, 25.73 mmol) in DCM (100 mL) was dropwise added Tf2O (8.7 g, 30.9 mmol) at 0 oC for 30 min. The reaction was stirred at 0 oC for 16 hrs. After diluted with DCM, the mixture was washed with aq. NH4Cl solution and aq. NaHCO3 solution successively. The organic phase was dried over anhydrous Na2SO4, filtered and concentrated to give crude product, which was purified by column chromatography on silica gel (eluted with petroleum ether: ethyl acetate =4: 1) to give the title compound (6.3 g, 67.7% yield) as off-white solid.

The synthetic route of 2-(3-Oxocyclopentyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACHILLION PHARMACEUTICALS, INC.; WANG, Qiuping; GADHACHANDA, Venkat, Rao; WANG, Xiangzhu; DESHPANDE, Milind; PAIS, Godwin; CHEN, Dawei; WILES, Jason, Allan; HASHIMOTO, Akihiro; PHADKE, Avinash, S.; AGARWAL, Atul; (296 pag.)WO2017/35357; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 132898-96-5, category: indolines-derivatives

Step 1: 5-{[(2S)-2-(Phenoxymethyl)pyrrolidin-1-yl]sulfonyl}-1H-indole-2,3-dione To a cold solution of 2,3-dioxo-2,3-dihydro-1-H-indole-5-sulfonylchloride (3.80 g, 15.5 mmol) in a 1:1 mixture of THF:CHCl3 (194 mL) was added drop-wise via syringe pump a solution of (2S)-2-(phenoxymethyl)pyrrolidine (2.85 g, 16.1 mmol, 1.03 eq) (J. Med. Chem, 44, 2014, 2001) and N,N-diisopropylethylamine (5.61 mL, 32.2 mmol, 2 eq) in CHCl3 (30 mL) over a period of 50 minutes under a dry N2 atmosphere with cooling in an ice bath. After stirring at room temperature for 64 hr the reaction mixture was concentrated and the crude product was flash chromatographed twice using Biotage KP silica gel, and gradient of 98/2 CH2Cl2/CH3OH as eluent on the first column and 90/10 CH2Cl2/CH3OH as eluent on the second column to give the title compound as a dark green solid (5.29 g, 88% yield). NMR (400 MHz, DMSO-d6): consistent. MS: (ES-) m/z 385 [M-H]. MS: (ES+) m/z 387 [M+H].

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Dioxoindoline-5-sulfonyl chloride, and friends who are interested can also refer to it.

Reference:
Patent; Wyeth; US2005/250798; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, A new synthetic method of this compound is introduced below., Computed Properties of C9H6BrNO2

General procedure: 30 mg of SiO2_g-C3N4 nanocomposite was dispersed in aqueous media (3 ml) for 30 min and dimedone or 4-hydroxycoumarin (1 mmol), malononitrile (1 mmol) and isatin (1.0 mmol) were added to the mixture. Then, the mixture was stirred at reflux conditions for an appropriate time, while the reaction progress was monitored by thin layer chromatography (TLC). After the reaction was completed, ethyl acetate was employed for the extraction of crude product and the products were dried over anhydrous Na2SO4. The solvent was evaporated followed by recrystallizing of the crude product in hot ethanol, and pure products were identified by IR, 1H and 13C NMR spectral data. The SiO2_g-C3N4 nanocatalyst was washed with EtOH, dried and reused for the next run.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri, Mohammad Ali; Research on Chemical Intermediates; vol. 44; 2; (2018); p. 1173 – 1188;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3335-98-6, name is 1-Phenyloxindole, This compound has unique chemical properties. The synthetic route is as follows., category: indolines-derivatives

General procedure: All reactions were conducted in 10 mL glass vials fitted with crimpcap septum caps. The reaction vial, equipped with a magnetic stir bar, was charged under an N2 atmosphere with the oxindole (2.25 mmol),Pd2(dba)3 (51 mg, 0.056 mmol, 2.5 mol%), i-Pr-BI-DIME (7) (41 mg,0.112 mmol, 5 mol%), K2CO3 (932 mg, 6.75 mmol) and the aryl bromide(1.1 equiv), then sealed with a crimp-cap septum. Dioxane (5.0 mL, degassed) was added via syringe and the reaction was stirred in an oil bath at 100 C for 24 h. The reaction mixture was then cooled to room temperature and filtered through a Celite pad using EtOAc (15mL) as eluent. The filtered solution was washed with H2O (5 mL),dried over anhydrous Na2SO4 and then concentrated under reduced pressure. The crude residue was purified using a 12 g silica column(30% EtOAc/hexanes) to afford the desired oxindole product.

According to the analysis of related databases, 3335-98-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Mangunuru, Hari P. R.; Malapit, Christian A.; Haddad, Nizar; Reeves, Jonathan T.; Qu, Bo; Rodriguez, Sonia; Lee, Heewon; Yee, Nathan K.; Song, Jinhua J.; Busacca, Carl A.; Senanayake, Chris H.; Synthesis; vol. 50; 22; (2018); p. 4435 – 4443;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 5394-18-3, name is 2-(4-Bromobutyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5394-18-3, Computed Properties of C12H12BrNO2

General procedure: N-(4-mercaptobutyl) phthalimide (3) : N-(4-bromobutyl)-phthalimide (2, 2.81 g, 10 mmol) was dissolved in DMF (30mL) at room temperature. Sodium hydrosulfide (0.62 g, 11mmol) and TBAB (0.98 g) was added and stirred at room temperature under N2 atmosphere for 10 h. After the completionof the reaction (monitored by TLC analysis), the mixture was diluted with water and extracted with ethyl acetate (3×40 mL). The organic layer was washed twice with saturated brine (2×40 mL), dried over anhydrous sodium sulfateand the solvent was evaporated to dryness. The crude residue was purified by chromatography on silica (ethyl acetate/petroleum ether = 1/20) to afford pure 3 (2.00 g, 85% yield) as wax. 1H NMR (CDCl3, 400 MHz), delta: 1.44 (t, 1H, J=8.0Hz, S16H), 1.63-1.70 (m, 2H, C13H), 1.76-1.84 (m, 2H,C14H), 2.57 (q, 2H, C15H), 3.68 (t, 2H, J=6.9 Hz, C12H),7.72-7.82 (m, 4H, PhH); 13C NMR (CDCl3, 100 MHz), delta:24.0 (C15), 27.2 (C13), 31.0 (14), 37.1 (C12), 123.0 (C3,C6), 131.9 (C4, C5), 133.8 (C1, C2), 168.0 (C7, C9). (KunHu [17]: 1 H NMR (CDCl3, 500 MHz), delta: 1.26 (t, 1H, J = 7.0Hz), 1.63-1.69 (m, 2H), 1.77-1.83 (m, 2H), 2.55-2.59 (dd,2H, J = 7.0 Hz), 3.70 (t, 2H, J = 7.0 Hz), 7.72 (dd, 2H, J =3.0, 5.5 Hz), 7.84 (dd, 2H, J = 3.0, 5.5 Hz); 13C NMR(CDCl3, 125 MHz), delta: 24.09, 27.31, 31.10, 37.33, 123.24,132.11, 133.95, 168.39).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(4-Bromobutyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Shao, Yan-Dong; Song, Huang-Wang; Feng, Wen; Wang, Xiang-Hui; Shi, Zai-Feng; Wu, Lu-Yong; Chen, Guang-Ying; Lin, Qiang; Letters in Organic Chemistry; vol. 15; 3; (2018); p. 206 – 213;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 954-81-4, name is N-(5-Bromopentyl)phthalimide, A new synthetic method of this compound is introduced below., Product Details of 954-81-4

Step 1: Preparation of tert-Butyl 4-(5-(1,3-dioxoisoindolin-2-yl)pentyl)-2-phenylpiperazine-1-carboxylate In a microwave vial, tert-butyl 2-phenylpiperazine-1-carboxylate (500 mg, 1.906 mmol, 1 eq), cesium carbonate (1863 mg, 5.72 mmol, 3 eq), and 2-(5-bromopentyl)isoindoline-1,3-dione (564 mg, 1.906 mmol, 1 eq) were dissolved in DMF (3 mL). The reaction was put in the microwave for 25 min at 110 C. The mixture was taken up in EtOAc and water extracted with EtOAc. The combined organics were washed with brine, dried over MgSO4, filtered, and concentrated, and purified by silica gel chromatography to give the title compound (460 mg, 50.5% yield) as a colorless oil.

The synthetic route of 954-81-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; BECKWITH, Rohan Eric John; JIANG, Hua; WANG, Ce; (54 pag.)US2018/271837; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 1254319-51-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1254319-51-1, name is 6-Bromo-2-methylisoindolin-1-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 6-bromo-2-methylisoindolin-l-one (5 g, 22.1 mmol) in DMF (30 mL) was added bis(pinacolato)diboron (6.18 g, 24.3 mmol) and potassium acetate (6.51 g, 66.4 mmol). The reaction mixture was degassed and backfilled with N2 gas, and l, l’-bis(diphenyl-phosphino)ferrocene palladium(II)dichloride dichloromethane (0.903 g, 1.106 mmol) was added. The reaction mixture was stirred at 80 C for 10 hours. After diluting with EtOAc and water, the organic layer was concentrated and purified on silica column (100% EtOAc) to get the product as a mixture of the title compound as a boronic ester and boronic acid, which was not further purified. MS: 274 (M+1). 1H MR (500 MHz, CDC13): delta 8.33 (s, 1 H), 7.98 (d, 7.5 Hz, 1 H), 7.46 (d, 7.5 Hz, 1 H), 4.41 (s, 2 H), 3.22 (s, 3 H), 1.38 (s, 12 H).

The synthetic route of 6-Bromo-2-methylisoindolin-1-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MSD R&D (CHINA) CO., LTD.; ACTON, John, J., III; BAO, Jianming; DENG, Qiaolin; EGBERTSON, Melissa; FERGUSON, Ronald, III; GAO, Xiaolei; HARRISON, Scott Timothy; KNOWLES, Sandra, L.; LI, Chunsing; LO, Michael Man-Chu; MAZZOLA, Robert, D., Jr.; MENG, Zhaoyang; NA, Meng; RUDD, Michael, T.; SELYUTIN, Oleg, B.; TELLERS, David, M.; TONG, Ling; ZHANG, Fengqi; (195 pag.)WO2019/5587; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 3339-73-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3339-73-9, name is 3-(1,3-Dioxoisoindolin-2-yl)propanoic acid belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 1.0 mmol of (1,3-dioxoisoindolin-2-yl) acid, N-ethyl-N-dimethylaminopropylcarbodiimide (EDC) (1.1 mmol), hydroxybenzotriazole(HOBt) (1.2 mmol) and N,N-Diisopropylethylamine (2.0 mmol) weremixed in minimum DMF and the obtained mixture was stirred for5 min. Then, 4-aminoquinoline-diamines (1.0 mmol) was added to thereaction mixture and the stirring was continued for 5 h. The reactionend was proved by thin layer chromatography (TLC). Then, DMF wasevaporated using rotary evaporator and cold water (20 mL) was added,and solid precipitates obtained were filtered and washed with coldwater. The crude product was recrystallized in absolute ethanol.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-(1,3-Dioxoisoindolin-2-yl)propanoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Rani, Anu; Legac, Jenny; Rosenthal, Philip J.; Kumar, Vipan; Bioorganic Chemistry; vol. 88; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem