Tag: M.W=200-300

Application of 954-81-4, A common heterocyclic compound, 954-81-4, name is N-(5-Bromopentyl)phthalimide, molecular formula is C13H14BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[69] Potassium carbonate (13.57 g, 98.20 mmol), pyrrolidine (4.47 ml, 54.01 mmol) and sodium iodide (7.359 g, 49.098 mmol) were added to ethanol/acetone (1:1) at room temperature and stirred for 1 hour. To the reaction mixture was slowly added N – (5-bromopentyl)phthalimide (2) (10.60 g, 49.10 mmol), and the resulting reaction mixture was refluxed at 50 0C for 24 hours. After the reaction was completed, the resulting white solid was filtered and the solvent was evaporated under reduced pressure. Afterwards, the obtained residue was extracted with a saturated IN NaOH aqueous solution and dichloromethane three times. Then, the organic phase was dried with anhydrous magnesium sulfate and distilled under reduced pressure. The resulting residue was subjected to silica gel column chromatography (eluent: dichloromethane :methnol: ammonia water = 100:9:1) to give the target compound (3.27 g, 45 %).[70] 1H-NMR (400 MHz, CDCl3) delta 7.81-7.66 (m, 4H, aromatic), 3.66-3.63 (t, 2H, -CH2 -(CH2)4-NC4H8), 2.51-2.49 (t, 4H, -(CH2)S-NC2H4C2H4), 2.45-2.41 (m, 4H, -(CH2)5-NC2 H4C2H4), 1.77-1.74 (m, 2H, -(CH2VCH2-NC4H8), 1.68-1.55 (m, 4H, -CH2-CU2-CU2 – CH2-CH2-NC4H8), 1.36-1.32 (m, 2H, -CH2-CH2-CH2 -CH2-CH2-NC4H8).

The synthetic route of 954-81-4 has been constantly updated, and we look forward to future research findings.

Reference of 959235-95-1, A common heterocyclic compound, 959235-95-1, name is 6-(Trifluoromethoxy)indoline, molecular formula is C9H8F3NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

HATU (7.02 g, 18.5 mmol) was added to a mixture of 6-(trifluoromethoxy)indoline [CAS 953906-76-8] (2.5 g, 12.31 mmol), 2-(4-chloro-2-fluorophenyl)acetic acid [CAS 194240-75-0] (2.32 g, 12.3 mmol) and diisopropylethylamine (6.1 ml_, 36.9 mmol) in DMF (100 ml_). The resulting mixture was stirred at room temperaure for 12 h. The mixture was diluted with water and the precipitate was filtered off and washed with water. The residue was taken up with EtOAc and the organic layer was washed with a 10% solution of K2CO3 in water, washed with brine, dried over MgSO4, filtered, and the solvent was evaporated under reduced pressure. The crude product was crystallized from diisopropyl ether to give 2- (4-chloro-2-fluorophenyl)-1 -(6-(trifluoromethoxy)indolin-1 -yl)ethanone 6a (4 g).

The synthetic route of 959235-95-1 has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 129487-92-9, name is tert-Butyl 5-aminoindoline-1-carboxylate, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 129487-92-9, Product Details of 129487-92-9

Example V; tert-butyl 5-(3,5-dichloro-phenylsulphonylamino)-2,3-dihvdro-indole-1- carboxylate6 g tert-butyl 5-amino-2,3-dihydro-indole-1-carboxylate are dissolved in 50 ml of pyridine and 50 ml dichloromethane. To this is added dropwise a solution of 6.5 g 3,5-dichlorophenylsulphonyl chloride in 50 ml dichloromethane and the mixture is stirred for 1 hour at ambient temperature. Then it is diluted with dichloromethane and washed with 1 N hydrochloric acid and with saturated sodium chloride solution. After drying with magnesium sulphate the solvents are eliminated in vacuo and the residue is chromatographed on silica gel (cyclohexane/ethyl acetate 70:30 to 30:70). Yield: 8.6 g (76 % of theory)Mass spectrum (ESI+): m/z = 460 [M+NH4]+

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, tert-Butyl 5-aminoindoline-1-carboxylate, other downstream synthetic routes, hurry up and to see.

Electric Literature of 5394-18-3,Some common heterocyclic compound, 5394-18-3, name is 2-(4-Bromobutyl)isoindoline-1,3-dione, molecular formula is C12H12BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of the intermediates 3a-3e (5 mmol) and corresponding secondary amine 4a-4g (5.5 mmol) was added in CH3CN (20 ml) at the presence of anhydrous K2CO3 (6 mmol). The mixture was heated at 65 C for 6-10 h. The solvent was evaporated in vacuo. The residue was dissolved in CH2Cl2 (25 mL), washed with water (20 mL × 3), and the combined organic phases were washed with saturated aqueous NaCl (30 mL), dried over sodium sulfate, and filtered. The solvent was evaporated under reduced pressure. The residue was purified on a silica gel chromatography using mixtures of petroleum/acetone as eluent to get the target products TM-1~TM-28.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(4-Bromobutyl)isoindoline-1,3-dione, its application will become more common.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 868066-91-5, name is 5-Bromo-2-methylisoindolin-1-one, A new synthetic method of this compound is introduced below., Safety of 5-Bromo-2-methylisoindolin-1-one

General procedure: 5-Bromo-2-methylisoindolin-1-one (520 mg, 2.30 mmol) and thiophene-2-boronic acid (442mg, 3.45 mmol) were dissolved in a mixure of toluene (12 mL) and EtOH (6 mL). A solutionof 2 M Na2CO3 (3 mL) and Pd(dppf)Cl2 (94 mg, 0.12 mmol) were added and the entiremixture heated at reflux under N2 for 2 h. Additional thiophene-2-boronic acid (294 mg, 2.30mmol) was added and reflux continued under N2 overnight. Upon cooling, the mixture wasdiluted with water (100 mL) and extracted with CH2Cl2 (6×50 mL). The combined organicfractions were dried (Na2SO4), filtered, and the solvent removed under reduced pressure togive a crude solid which was purified by flash column chromatography on silica gel (EtOAcas eluant). The title compound was isolated as a light-brown solid (510 mg, 97percent).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference of 954-81-4, A common heterocyclic compound, 954-81-4, name is N-(5-Bromopentyl)phthalimide, molecular formula is C13H14BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a suspension of compound 9-12 (20 mmol) and potassium carbonate (50 mmol) in ACN (150 mL) was added dropwise the secondary amine (4 eq.) and the reaction mixture was refluxed for 24 h. After cooling, the reaction mixture was filtered and the filtrate was concentrated to afford an oil that was directly engaged in the next step without further purification. Reactions were performed on a scale of 5 to 20 g of compounds 9-12 to afford amines 14 and 15 with the following yields: 14a, Yield 90%; 14b, Yield 93%; 15a, Yield 89%; 15b, quantitative yield; 15c, Yield 35%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Adding a certain compound to certain chemical reactions, such as: 6326-79-0, name is 6-Bromoisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6326-79-0, Quality Control of 6-Bromoisatin

6-Bromo-1H-indole-2,3-dione is treated with sodiumhydroxide (1.1 eq) in water at 30C till all solids are dissolved. Sodiumnitrite (1.1 eq) dissolved in a little amount of water is added slowly at this temperature and the solution is stirred for additional 30 minutes. The mixture is slowly added to a solution of sulfuric acid (1.9 eq) in water at 0C keeping the internal temperature below 10C. After additional 20 minutes at this temperature, a mixture of tin(ll)chloride (2.4 eq) in water and hydrochloric acid is added slowly. After 2h of stirring at 0C workup by filtration over celite, washing with acetone and removing the solvent in vacuum gives the intermediate carboxylic acid. 6-Bromo-1H-indazole-3-carboxylic acid is converted into the corresponding methylester following standard procedures.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromoisatin, other downstream synthetic routes, hurry up and to see.

Reference of 118289-55-7,Some common heterocyclic compound, 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, molecular formula is C10H9Cl2NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of 6-chloro-5-(2-chloroethyl)-1,3-dihydro-2H-indol-2-one 1 (1.00mol), potassium carbonate (1.20mol), secondary amine (2a-h, 1.30mol) in water (10mL) was refluxed until completion (TLC, about 24-48h) and the reaction mass was cooled to RT and then extracted with DCM to get crude 3a-h. Recrystallized using aqueous acetone or aqueous ethanol or methanol (Yield 55-70%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6-Chloro-5-(2-chloroethyl)indolin-2-one, its application will become more common.

Electric Literature of 6941-75-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6941-75-9, name is 5-Bromoisoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The mixture of 4-bromophthalimide (225 mg, 1 mmol), 4-RPhSH(3 mmol), K2CO3 (136 mg, 1 mmol) and CuI (10 mg) was added to DMF (10 mL). The solution was heated at 130 C for 6 h under the protection of nitrogen. After cooled, water (30 mL) was added and the precipitation was filtered, washed with water. The product was purified by column chromatography on silica gel using dichloromethane/acetone (60:1).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromoisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 99365-40-9, name is 6-Bromoindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. category: indolines-derivatives

Compound 2 (2.1g, 10mmol), 6- bromo-indole (5.6g, 11mmol), glacial acetic acid (60ml) was addedThe two bottles, 3 drops of hydrochloric acid was added dropwise, under a nitrogen atmosphere, 130 refluxed for 24h, cooled to room temperature, adding a lot of water,Extracted with methylene chloride three times, the combined organic phase was washed with saturated sodium chloride, dried over anhydrous MgSO4, spin dry solvent,Petroleum ether: methylene chloride 1:1 (by volume) as eluent, column separation, spin dry to give a brown flaky solid(6.46g, 92%).

The synthetic route of 99365-40-9 has been constantly updated, and we look forward to future research findings.